-
Anonymous users2024-02-131. The watch buckle in the picture below only needs to press the raised part with your hand to open the bracelet.
2. For the bracelet in the picture below, you need to press the upper and lower snap buckles at the same time to open the bracelet.
3. For the bracelet in the picture below, you only need to pull up the strap with your hand to open the bracelet.
4. For the strap in the picture below, you need to pick the circle with your fingernails and pick it up.
5. Lower the chart chain, press the bulge above the buckle, and gently pull it outward to open the bracelet.
-
Anonymous users2024-02-12Hello dear, it is a pleasure to serve you, the watch hand of the watch usually needs to be pulled out and pushed in to adjust the time and date. If you want to pull out the dial hand, you can do so by following these steps:1
Locate the crown or dial knob on your watch, press and rotate the dial knob so that the hands are closest to "12". 2.Gently pull out the dial knob until you can toggle the hands.
At this point, you should be able to see the pointer start moving, adjusting the time and date. 3.If you need to pull out the watch hand completely, you can press and hold the crown with your finger while pulling out the knob of the watch knob, and then slowly move the crown until the watch hand is completely pulled out.
Next, it's time to replace the watch battery or perform more in-depth maintenance work. It should be noted that the watch hand is a very sensitive part, and if not handled properly, it is easy to cause damage to the crown and watch movement. Therefore, before pulling out the adjustment hand, you need to make sure that the watch has stopped working, and operate it gently, trying to avoid excessive force with your hands.
If you're not sure how to do this, ask a professional watch repair provider for help.
-
Anonymous users2024-02-11Summary. Hello, in your case, the internal structure of the watch is more complicated, it is recommended not to repair it privately. so as not to injure other parts by mistake.
Get the after-sales or professional repair of the watch place to repair, the part of the watch to adjust the time is connected by a metal rod knob, which can be replaced directly after damage, which is not a particularly serious failure.
Different watches are disassembled in different ways, such as mechanical watches and electronic watches, and the way the watch is sealed is different. No matter what kind of watch it is, if you want to adjust the knob on the watch, you should go to a professional place to repair the watch, if you repair it yourself, it may cause damage to the watch, and it may also affect the waterproof function of the watch.
**How to get the watch knob back if it is dropped.
Please wait patiently for 2 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.
Hello, in your case, the internal structure of the watch is more complicated, it is recommended not to repair it privately. In order to avoid accidental injury to other parts of the socks to the after-sales or professional maintenance of the watch for repair, the parts of the watch are connected to the knob by a metal rod, which can be replaced directly after damage, which is not a particularly serious failure. Different watches are disassembled in different ways, such as mechanical watches and electronic watches, and the way the watch is sealed is different.
If you want to adjust the knob on the watch, you should go to a professional place to repair the watch, if you repair it yourself, it may cause damage to the watch and may also affect the waterproof function of the watch.
Is there a way to get yourself back.
No, the watch parts are too small, it is not recommended to install it yourself, Zhao repair department is more safe!
How much does it cost to go to repair.
This one is very cheap, a few dollars, no more than 30 yuan at most.
Can the phone be repaired?
Hello, the mobile phone store can't be repaired, because the watch and the mobile phone structure are different, the mobile phone is mainly the motherboard structure, and the parts are very different.
Facial tendon pulling technique Head tendon pulling: (do head tendon first) Dialing each meridian in order, you should first do a simple tendon dialing of the neck (mainly in the way of thinning, dialing, and kneading using the tendon rod to "point" contact tendon dialing). >>>More
In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch. >>>More
Pull the crown to the second square, that is, the outermost time adjustment grid, press and hold the button at the two o'clock position for 2 seconds, at this time the small minute hand of the chronograph stopwatch will turn around, let go and press the button again for 2 seconds, then the second hand will turn around, and then you can press the button at the 4 o'clock position to fine-tune, press and go for a second, press and hold for a fast walk, until it returns to the 12 o'clock position.
From the very beginning of the screen, the time is displayed. >>>More
If the door handle of the car is broken, open the door panel to check whether the parts inside are stuck, if it is stuck, you can put some butter on it and return it to its position with a wire cutter. If it is a handle with induction, it is not within the scope of do-it-yourself, and it should be repaired at the car dealership or 4S shop. >>>More