The suction cup hook can t be sucked for a long time, which trick can be solved?

In our home life, "hooks" must be indispensable, can be used to hang some bits and pieces of small things, so that the room looks more regular, and hooks are divided into many types, there are suction cup type, adhesive type and nailed into the wall, and the latter two if they fall off will have a great impact on the beauty of the wall, so now most people like to choose suction cup hooks, which are easy to pick up and will not hurt the wall, but the suction cup hook also has a disadvantage, that is, it will often fall off if it is not sucked firmly, This has also caused trouble to many people, so today I will take you to understand those tips that can make the suction cup suck firmer, and you will never have to worry about things falling after you learn it! <>

First of all, you have to determine whether it is the cause of the suction cup or the reason of the wall, if it is the kind of rough wall, it is definitely not suitable for hooking with a suction cup, and then if there is a lot of dust on the wall, you also need to pay attention, to wipe the wall dry, and if it is a problem with the suction cup, then we need to use some tips. <>

The first trick: soften the suction cup, the suction cup hook material we use in our life has a slight hardness, which also affects the adsorption of the suction cup, so to soften the suction cup, the specific operation is also very simple, you only need to take a bowl of hot water, put the suction cup into the water and soak it for 5 minutes, so that the rubber part on the straw hook can be softened and taken out. <>

The second trick: apply some materials to increase the adsorption force, in our home life, there are many materials that can be used, the first is egg white, evenly spread the egg white on the suction cup, and then suck it to the wall and wait until the egg white is dry before hanging the item. The second is soapy water, which is also applied to the washing plate to dry and hang the items.

The third is a skin oil or hand cream at home, and the steps are the same.

These methods can effectively prevent the suction cup from being unable to suck.

First of all, clean the wall without dust and grease, and put a little egg white in the suction cup when it is cleaned, so that the suction cup and the wall can be sucked more firmly.

You can apply some glue to the adhesive side of the hook and stick it to the place where it needs to be glued, so that it will stick very firmly.

You can fill a small bowl with hot water, then soak the cleaned hook in water for about 5 minutes, and then take it out and easily adsorb it to the wall.

1. Water: The most common method is to dip some water on the back of the hook before sticking the suction cup hook to the wall, and then quickly stick it to the wall. Although this method will be a little better than not getting wet, the effect is still not very ideal.

2. Soapy water: If you need a better effect, you can use soapy water, and you can also apply soapy water to the back of the suction cup hook, and then quickly stick it to the wall, and you can hang things when it dries, and the effect is very good.

3. Egg white: It will be more troublesome to use egg white, you need to separate the egg white from the egg first, and then use a cotton swab to coat the back of the hook with egg white, and stick the hook to the position where you need to hang things after applying it evenly. Pay attention to the hook that has just been glued on and do not hang things immediately, wait for the egg white to dry completely, it generally takes about 12 hours, at this time, under the effect of the egg white, the suction cup hook will become very firm, and you don't have to worry about falling off often.

4. Toothpaste: If you feel that using egg whites is more troublesome and wasteful, you can replace it with something that is relatively simple and often used in life, and the best is toothpaste. Squeeze out an appropriate amount of toothpaste and apply it to the back of the suction cup hook, then stick it to the corresponding position, and hang things when the toothpaste is almost well combined with the hook.

The effect of this method is also very good, and it is better than applying it with water or soapy water.

What to do if the suction cup can't hang up and always fall, a small trick to let you say goodbye to your troubles.

Just let it go and soak in the water, just like the new one

Check to see if the wall glass you are hanging on is clean and fine. You can apply some water to the suction cup and wait for it to be slightly moistened and stick to the glass.

In short, it must be clean.,If you can't do it, you have to change it.。。

Suction cup hook correct use method:

Step 1: The surface of the installation should be free of stains, oil stains, and dust.

Step 2 Choose the position of the suction cup hook. Pressing down on the non-adsorption surface and pressing the center valve is the air discharge.

Step 3: Pull him vertically down.

After the installation of this product, this product can immediately hang something down and press down, and it is more and more sturdy. Generally, it takes more than 10 hours to wait, which is the technical advantage of our products. You can use it with confidence.

Precautions: 1. The normal weight of the single hook is best within kilograms, do not exceed the maximum load items, and do not hang dangerous and fragile items, so as to avoid the danger caused by improper use.

2. Please do not install this product in a place near fire, and uneven, such as soil wall, plaster surface, and water-based painted wall.

3. Do not install places that children touch to prevent danger.

It is recommended to try the products of the good Qianhang **There are their products for sale.

First of all, you can use a hair dryer to blow it on the sticky wallThis way it won't fall off, and it's easy to place and hang some things, as long as it stays dry when it's sticky.

Hooks are almost one of the most needed things in the home. It can hang a lot of small items, among which the suction cup hook is the most popular. Compared with the ordinary stick type and nail hook type, it will not damage the wall and is very convenient to operate.

In order not to leave traces on the wall, more and more people are accustomed to using suction hooks, but this kind of hook is not very firm and often slips off, affecting the use, how to make the suction hook suck more firmly? First, prepare a container or small bowl and pour in some hot water.

Paste it againBefore we need to put the suction cup in hot water and soak it for five minutesIn this way, the rubber part of the suction cup will become softer and more firm when pasted. Be sure to wipe the suction cups clean after soaking, and finally glue the suction cup hooks to the wall. Remember to be sure to hang items after 24 hours.

Another way is to apply soapy water to the inside of the hook suction cup and quickly attach it to the wall, or it will take 24 hours to hang the object, because the adsorption effect can be significantly improved by one level after using soapy water.

Another way is to use hand cream, we can use a little bit, just rub it on the hook suction cup, and then we use a hair dryer and blow one side with the suction cup. Finally, wipe off the surface with a paper towel, which is also less likely to come off and stronger. You can also use egg whites, remember that they are egg "whites"!

Use a cotton swab to evenly coat the egg whites on the back of the hook! Then stick it on the wall and wait until the egg whites are completely dry before hanging the thing (it usually takes about 12 hours). With egg white suckers, the hook will be sturdy!

In fact, the hair dryer is used in the principle of thermal expansion and cold contractionUse a hair dryer to blow the wall upside down on the hook so that it will become stronger after sticking.

1. Wipe the wall clean before sticking the suction cup hook. Because the cleanliness of the wall will also affect the gravity after the hook.

2. Soapy water: Apply soapy water to the inside of the suction cup of the hook and quickly stick it to the wall. Wait until it's dry before hanging things, it's super secure.

3. Egg white: Use a cotton swab to evenly coat the back of the hook with egg white, and then paste it on the wall. Wait until the egg whites are completely dry before hanging things. (It usually takes about 12 hours).

4. Toothpaste: Apply an appropriate amount of toothpaste evenly to the back of the suction cup hook and stick it to the wall. Wait for the toothpaste to dry before hanging up. Although the adsorption effect of this method is not as good as that of egg white, it is better than that of soapy water.

5. When sticking the hook, force from the middle to the four sides to press out the air in the suction cup hook. The less air, the better the adsorption.

First of all, you have to choose a *** sticky hook. There are several types of suction cup hooks available in large supermarkets:

1. Traceless sticky hook, which is patented and easy to identify.

2. Relying on physical leverage to strengthen the exhaust air, the purchase is carefully read and the instructions should be able to find.

3. Remove air by rotating the pressurized gland.

4. Sticky hook, glue to paste. Among them, the first three are reusable, so they will be slightly more expensive, and the fourth is disposable, which will affect the beauty of the wall.

5. Secondly, during installation, you can wipe the wall clean with water (the wall is best tiled or mirror, the higher the finish, the better), and then install it after it is completely dry.

1. Use a cotton swab to apply the egg white liquid to the suction cup, stick it to the tile or glass, and then hang the weight after drying.

2. Apply some soapy water to the suction cup, and then stick it to the wall to make it firmer.

3. Apply skin care oil to the suction cup and stick it to the wall for a day before hanging the heavy object.

4. Blanch the suction cup for 10 seconds to reinforce it.

5. Drip water in the suction cup and quickly stick to the flat surface.

Notes:

1. Do not install near the fire source.

2. Do not install on uneven planes, such as stucco walls, wood, etc. The above has Guangzhou thousands of hanging plastic supplies provided.

3. Do not hang items over or fragile items.

Stick a double-sided sticker to the bottom of the suction cup hook.

That's what I did.

Soak the suction cup in hot water for about 10 minutes. Wait until it softens and returns to its original shape.

When you use it, you will not fall off if you dip it in some water. ~

The solution is as follows:

1. Use water: wipe the wall and mirror in advance, dry it for later use, drop a few drops of water in the suction cup of the hook, and then quickly stick it to the wall, and press it from the middle to the surrounding when sticking, so that the air in the suction cup can be better driven out, and the hook is more firmly glued.

2. Use hot water: wipe the wall and mirror clean, dry and set aside, in case there is dust or small particles on the wall to cause air to enter the suction cup.

Put the suction cup in hot water (70 degrees to 80 degrees) for 10 to 15 seconds, and then press it from the middle to all sides when it sticks to the wall, so that the air in the suction cup can be better driven out, and the hook will stick more firmly.

3. Egg white: In order to stick more firmly, wipe the wall and mirror in advance, dry and set aside.

Use chopsticks to spread the egg white evenly on the suction cup and glue it to the wall in the same way as in the first two steps.

Before hanging heavy objects, gently shake the lower suction cup hook up, down, left and right, and check the firmness of the firm suction cup.

I've used it a lot of time, and it fell off in a few days, which is really annoying. It's okay that it doesn't drop, and if you press it again, it will fall again, so it's better to change it.

Either you don't need a 502 or you buy another good one.

How to make the suction cup hook firm and no longer fall capriciously, the working girl slightly recommends these two tricks.

Suction cup hook is a storage tool that every family will use, and the suction cup on the tile can be used to hang things, which is a good helper for storage in the kitchen and bathroom. But in life, we will also encounter the problem that the suction cup hook cannot be sucked. So, how do you use a suction cup hook?

What should I do if the suction cup hook can't be sucked？How do suction cup hooks stick stronger? If you're still forWhat should I do if the suction cup hook can't be suckedIf you are troubled, you might as well follow me to learn about the relevant knowledge introduction of suction cup hooks!

How to use the suction cup hook1. First of all, disassemble the suction cup hook.

2. Select a place. The smoother the place, the stronger it is, such as tile, glass, etc.

3. Installation. Clean the sticky areas. Press it on the wall and you're good to go. Suitable for all occasions.

Suction cup hook precautions1. The weight of a single hook is within kilograms, do not be overweight, and do not hang dangerous goods, so as not to fall off.

2. Keep away from the uneven wall near the fire.

3. Do not install it within the reach of children to prevent danger.

What should I do if the suction cup hook can't be sucked1. Use a cotton swab to apply the egg white liquid to the suction cup, stick it to the tile or glass, and then hang the weight after drying.

2. Apply some soapy water to the suction cup, and then stick it to the wall to make it firmer.

3. Apply skin care oil to the suction cup and stick it to the wall for a day before hanging the heavy object.

4. Blanch the suction cup for 10 seconds to reinforce it.

5. Drip water in the suction cup and quickly stick to the flat surface.

Which brand of suction cup hook is better1. German magicloc, advantages: it can adsorb rough walls. Disadvantages: difficult to disassemble, ugly shape.

2. Korean dehub, advantages: it can absorb rough walls and does not fall. Cons: Expensive.

3. LEC Japanese Ligu suction cup hook, convenient and affordable.

4. Taili suction film hook, environmental protection, novelty and practicality.

5. Shuangqing super suction cup magic non-marking sticker hook. Durable, easy to install, no damage to the wall.

6. Yiwanjia suction cup type small hook, no need to punch holes, can be recycled, saving space.

Summary: The above is what to do if the suction cup hook can't be sucked How to stick the suction cup hook more firmly, I hope to help friends who have this need! If you want to know more about it, please continue to ****** and there will be more exciting content in the future.