Why is there three levels of electric heating for rural coal to electricity conversion?

How to use the three gears of the heating circulation pump:

The heating circulating pump is divided into three gears, high and low, the low gear is 55 degrees, the middle gear is 70 degrees, and the high gear is 105 degrees. When using, it can be set according to the room temperature, if the indoor temperature is very low, you can set the high grade first, exclude the water vapor, and then set the medium temperature when the temperature rises; If you are sleeping at night, you can turn on the low gear; If you want the room temperature to be comfortable, you can set 2 settings.

What to pay attention to when using heating:

1. Heating facilities cannot be modified without authorization.

First of all, when using the heating, the heating system inside it is set according to the specification, do not change it without authorization, otherwise it will not only be hydraulically imbalanced, but also damage the heating facilities and cause greater losses. If special changes are required, you can apply to the heating unit.

2. Temperature setting.

Secondly, the heating temperature is best kept at 18-25 degrees, especially in self-heating homes, do not open when it is cold and close when it is hot, which is not only bad for the body, but also wastes energy. In addition, when resting at night, the temperature should not be too high, and the room temperature should be kept at 16-18 degrees. If there is no one at home for the time being, you can use the radiator.

Set up a low-gear run.

3. Do not cover the radiator.

When then heating, do not add any object to the radiator, not only affect its thermal conductivity and convection, but also encounter failures, and it is not convenient to repair. If you really want to block, you can choose an integral mobile cover.

4. When testing the water under pressure, keep people at home.

Finally, if it is a new community, it is necessary to do a good job of pipeline inspection to see if the valve is loose or slippery, and if you encounter technical problems, you can feedback to the heating company. If the old community encounters running and risking problems, it is necessary to immediately turn off the water supply return valve, turn off the power supply, and notify the heating department to repair it.

How to use the three gears of the heating circulating pump: The heating circulating pump is divided into three gears: high, medium and low, the low grade is 55 degrees, the middle gear is 70 degrees, and the high-end is 105 degrees. It can be set according to room temperature when used.

If the indoor temperature is very low, set the high end to remove water vapor first, and then set the medium temperature when the temperature rises; If you sleep at night.

Summary. Dear, hello, coal to electric heating so used 1The set temperature difference is the difference between the high temperature and the low temperature, when the high temperature is reached, the operation will be stopped, and when the low temperature is lower, the operation will be started.

In other words, it is equivalent to a parameter that automatically starts and shuts down the operation of the equipment with the high and low temperatures. 2.If you want to adjust the heating mode, you need to unlock Transen first, and the way to unlock it is:

Press and hold the mode + switch at the same time, and after about ten seconds, the panel background light will light up, and then press it to unlock Transen. 3.If you want to heat instantly, press the key after unlocking, it's OK, the word "heating" will be displayed when heating, when you want to turn it off, make sense, unlock it for transen first, and then press the key to turn it off, and then turn it off.

How to use coal-to-electric heating.

Dear, hello, coal to electric heating so used 1The set temperature difference is the difference between the high temperature and the low temperature, when the high temperature is reached, the operation will be stopped, and when the low temperature is lower, the operation will be started. In other words, it is equivalent to a parameter that automatically starts and shuts down the operation of the equipment with the high and low temperatures.

2.If you adjust the heating mode, you need to unlock Transen first, and the way to unlock it is: Mode + switch Press and hold at the same time, after about ten seconds, the panel background light will light up, and then press to unlock Transen.

3.If you want to heat instantly, press the key after unlocking, it's OK, the word "heating" will be displayed when heating, when you want to turn it off, make sense, unlock it for transen first, and then press the key to turn it off, and then turn it off.

Data expansion: Coal-to-electricity refers to the replacement of traditional boilers fueled by coal with boilers based on electricity, which is a clean energy source, that is, replacement boilers.

Summary. The set temperature difference is the difference between the set maximum temperature and the minimum temperature, when the maximum temperature is reached, the operation is stopped, and when the minimum temperature is lower, the operation is started. In other words, it is equivalent to a parameter that automatically starts and shuts down the operation of the equipment with the highest and lowest temperatures.

The set temperature difference is the difference between the maximum temperature and the minimum temperature, when the maximum code rolling temperature is reached, the operation will be stopped, and when the minimum temperature is lower, the operation will be started. In other words, it is equivalent to a parameter that automatically starts and shuts down the operation of the equipment with the highest and lowest temperatures. Repentance.

1.If you adjust the heating mode, you need to unlock the transen first, and the way to unlock it is: mode + switch At the same time, press the friend to change the residence, about ten seconds later, the panel background light will be on, and then the transen will be unlocked by pressing the virtual rent.

2.If you want instant heating, after unlocking the lock, then press the switch state comma key, it's OK, when heating, the word "heating" will be displayed, when you want to close it, the reason is to sell the book, first unlock the transen, and then press the key to open the ante, and close it.