How does the heating regulate the temperature? The correct way to adjust the thermostat of the heate

In fact, there are several ways to adjust the size of home heating, because the control valve is completely different for different systems. Therefore, we have to adopt different methods to adjust according to different systems in order to ensure that the right medicine is prescribed.

1. Automatic adjustment of the temperature control panel.

This method is intended for users who install motorized valves indoors and are equipped with a temperature control panel. The temperature control panel is also divided into traditional rotating temperature control and intelligent temperature control.

Non-smart temperature control in the radiator.

At the top of the water inlet, you can see a white thing that resembles a light bulb with a scale on it, and this is the switch that controls the temperature. Generally, moving to the position with a low number means that the temperature is lowered, and the number is high means that the temperature is turned up, and the temperature control valve can be turned according to the specific heating situation of the home.

Intelligent temperature control is even simpler, just set the temperature directly. Some can also be connected to Tmall Genie.

Implement remote control.

It's more convenient. 2. Adjustment of water supply or return valve.

If you don't have a thermostat on your radiator, then we can adjust the valve directly on the water supply or return. Because we must have valves installed on the heating and return pipes in our homes. At this time, we rotate the valve clockwise, so that the heating in the house is also smaller, and rotate the valve counterclockwise, and then the heating is also increased.

Of course, this is for the handwheel. For the handle, it is also adjusted according to its requirements. At this time, it is possible to regulate the water supply and return water.

3. Adjust the main valve outside the room.

There are many old neighborhoods in the north.

The old heating system is still used, and there are no valves in the house. Then we need to go to the outdoor main valve to adjust. It is also used to regulate the valve on the water supply pipe, and it can also adjust the valve on the return pipe.

Generally, different adjustment methods are adopted according to the handwheel or handle. The handwheel is the same as the above adjustment method, and the handle is generally open to large along the direction of the pipe, and perpendicular to the pipe, which is open to small, that is, closed.

The radiator can be adjusted by the temperature regulating valve on the right side of the radiator in the picture.

Specific steps: 1. First, find the room where the heating needs to be adjusted, and enter the room where the temperature needs to be adjusted.

2. At the top water inlet of the radiator, you can see a white thing similar to a light bulb, which is the switch to control the temperature.

3. When we turn the switch so that it is pointed at the number "5", it means that the heating water is turned on to the maximum, and the heating will be hotter.

4. When adjusting, you can also touch the radiator with your hands to feel whether the temperature is appropriate. Since the water in the radiator needs to wait for a while to get better, you can adjust it and touch the temperature after a while.

6. If the temperature in the house is too high, you don't want the heating to be so hot. It can also be adjusted in the opposite direction by means of a switch. When a snowflake sign is adjusted, it means that the radiator is turned off and will not heat up.

Precautions: The heating should not be too hot.

The indoor temperature is controlled between 18 degrees Celsius and 20 degrees Celsius, and people feel comfortable.

Because in winter, people wear a lot of clothes, and if the indoor temperature is above 20 degrees Celsius, it will feel a little hot. If the temperature of the air conditioner is set high to 26 or more in winter, the heating temperature in winter is too high, which will make the indoor air abnormally dry, hurt people's body fluids and qi, make people feel hot all over the body, and feel dry in the eyes, ears, eyes, mouth, nose and throat.

When we are in a hot room for a long time, we sometimes feel cold hands and feet, but our head is congested and hot, which is manifested as sweating in the upper body, bloodshot eyes, palpitations, lethargy, irritability, and easy fatigue, which are similar to menopausal symptoms. This is related to the body's reduced ability to regulate temperature and poor blood flow, so it is recommended to lower the heating temperature.

Low indoor temperatures may make your hands and feet cold, but it is normal for the autonomic nervous system to protect the blood flow to the internal organs. If your hands and feet are warm, your body is cold, or your whole body is cold, you should see a doctor.

In order to improve the physical constitution of cold intolerance and enhance physical fitness, we should pay attention to eating less cold food, exercising more, exercising muscles, and trying to rely on our own regulatory system to cope with temperature changes.

The temperature of the radiator mainly depends on the temperature control valve, each group of radiators has a temperature control valve that can be adjusted, and the temperature control valve of different manufacturers is different, and the temperature can be adjusted according to their own needs.

The correct way to adjust the thermostat of the heater

1. If floor heating is installed in the home, the current temperature can be set in real time through the heating temperature controller. You only need to press the power switch to turn on the temperature switch. According to its display screen, you will find that the temperature in the room will be displayed on the left rough side, and the right side is used to control the temperature, and there is a button to adjust up and down.

2. You can set the mode key to manual mode, so that you can set it by yourself. The temperature is between 18 and 22 degrees, and if the temperature is displayed the same on both sides, you can increase the temperature by 2 to 3 degrees.

3. If you want the indoor temperature to reach about 22 degrees, we can directly set the temperature to 22 degrees on the thermostat, and it won't be long before the water can be heated to the temperature to be set through the thermostat, so as to have the effect of heating, and the room temperature will slowly rise.

How many degrees to set the temperature of the floor heating is the most cost-effective.

1. The temperature of floor heating is based on the comfort of the human body, generally speaking, it is more suitable for heating between 16 and 24 degrees in winter. Depending on the area, such as in the office or lounge, the temperature should generally reach around 20 degrees.

2. When turning on the floor heating, the higher the temperature setting, the better, because if the temperature is relatively high for a long time, it will cause the body temperature to rise, the heart rate to increase, and people will feel tired, dizzy, and affect memory. And if the temperature difference between indoor and outdoor is particularly large, once people go out, it is difficult to adapt, and it is easy to catch a cold.

3. The temperature in the room can be adjusted in a timely manner through the Wenyansen controller, and it can be accurately controlled within a certain temperature range.

First of all, open the heating valve to it wider, and then exhaust the air in the heating to it, and then heat it again, the heating will be very hot. Be sure not to let the heater have air inside.

Turning on the maximum flow rate will heat up faster, but it is not necessarily, there may be air or blockage, and the heating company or property management company needs to send someone to maintain it.

By controlling the flow rate of hot water into the pipe of the heat exchanger, the purpose of controlling the temperature of the equipment outlet is achieved. When the load changes, the flow rate is adjusted by changing the opening degree of the valve to eliminate the effect of load fluctuations and restore the temperature to the set value.

There is an important accessory in the radiator heating system, and that is the temperature control valve. The temperature control valve is a valve that controls the temperature of the heating air, and controls the amount of hot water entering the heating pipe to achieve the purpose of controlling the temperature, because the more hot water flows, the higher the temperature, and the less the flow rate, the lower the temperature.

When the load changes, the flow rate is adjusted by changing the opening degree of the valve to eliminate the effect of load fluctuations and restore the temperature to the set value. It is a proportional control valve that can operate without external energy, and is an economical and energy-saving product.

Since the temperature control valve can freely adjust the amount of hot water flow, when a room is unoccupied for a long time, the user can turn off the temperature control valve of the radiator in the room, which can play the role of room adjustment.

According to the requirements of the room temperature, the temperature can be adjusted and set by the temperature control valve, so as to ensure the constant room temperature of the room, and at the same time, it can also improve the comfort of the indoor thermal environment and achieve the purpose of saving energy. In general, installing a radiator thermostat control valve can save you 10 to 20% of your energy consumption.

Generally, there is a scale on the temperature control valve, you should install the kind of automatic thermostatic bag, intelligent temperature adjustment, no need to manually adjust.

Answer: We can adjust the temperature by surface-mounted radiators, because the thermostat can control the amount of hot water entering the heating pipe, and the more hot water, the higher the temperature, and vice versa.

We need to know the working principle of the heating temperature control valve, in order to control the temperature at the outlet of the equipment, the heating temperature control valve is to control the temperature by controlling the flow rate of the heat exchanger and the hot water inlet pipe. When the load changes, the only way to eliminate the effects of load fluctuations is to adjust the flow rate through a valve and finally restore the temperature to the set value.

1. Heating facilities cannot be modified without authorization.

The indoor heating system is designed, constructed and installed in strict accordance with the technical specifications, and unauthorized alteration of heating facilities often changes the operating conditions of the heating system, which can easily lead to hydraulic imbalance and affect the heating effect. In addition, their own modification of heating facilities, due to the lack of necessary construction and installation tools and experience, is easy to damage heating facilities, when the equipment is filled with water, it is easy to run and drip, affecting the normal heating supply, serious damage to property, causing economic losses to themselves and others. If the user really needs to modify the indoor heating facilities for special reasons, he can apply to the heating unit, and the heating unit can only make changes if the heating unit confirms that the change will not affect the heating effect.

Hope it helps, dear

For users who use radiators at home, if the outdoor temperature is not too cold during the heating season, you can adjust the thermostat on the Songli sock boiler to 45 degrees to 55 degrees. When the outdoor temperature is below zero, we need to adjust the thermostat to 60 degrees to 65 degrees.

If the temperature is below zero, the temperature on the thermostat is adjusted too low, and the pump will keep turning, but the home will not be warm, because the radiator dissipates heat too quickly, and the water will become 30 degrees or even lower for the distant circulation of the home.

For users who use underfloor heating at home, don't adjust the temperature too high, the suitable temperature is 40 degrees to 50 degrees. Because if the temperature on the thermostat is adjusted too high, it is not good for the floor heating pipe and it is easy to produce scale, and the temperature is too high will also affect the service life of the floor heating pipe.

Use caution. 1. There will be working temperature adjustment and high temperature protection on the boiler thermostat. When the temperature is below 75 degrees Celsius, a large fire is ignited, and a small fire is burned when the temperature exceeds 75 degrees, and the machine is shut down at 85 degrees.

If the temperature of the low fire is not enough, you can adjust the set temperature to a higher level, such as 80 degrees before turning to low heat. For adjustment methods, please refer to the thermostat's manual or boiler owner's manual.

2. If the flame load is small when the fire is small, such as only 30%, the boiler or burner will be increased, such as to 50% or even wild excitation. Flame adjustment is not recommended for users to do it themselves. Because of the adjustment of gas volume and air volume, if the adjustment is not good, there will be potential safety hazards and energy waste.

It is difficult to use visual inspection to determine whether the combustion is in the best state of the gas boiler, and it is necessary to use a flue gas tester during debugging.