What should you do if you want to be free of glue marks and glue lines in furniture edge banding?

When sealing the edge, we should use other glue to glue the tiles on both sides, so that it will be easy to deal with when the glue is dry.

After the end of the furniture edge banding, the glue marks of the edge banding can be scraped off with a knife of water, so that this problem can be solved.

With machine edge banding, machine edge banding can be sealed very well, and such a phenomenon will not occur.

When we have lived in a city or an area for a long time, we want to buy a house in that place. Then when we buy a house, we face many problems, because now there are many people who like their homes to be very clean and simple. In particular, the decoration of furniture and the edge sealing of furniture want to make their furniture more beautiful without traces.

So today we are going to talk about the edge banding of furniture, if you want to do it without glue marks or glue lines, what should you do to do it?

First of all, when we are assembling furniture, we must first seal these edges and then assemble, so at this time to choose the buckles, we personally recommend that you choose those ordinary buckles. Because there are a few in the wardrobe, and then we can go to customize the cabinet door, at this time we also need to look at the overall appearance when we customize the cabinet door. So if the door of this cabinet is very good-looking, then it means that this wardrobe is good-looking, because we can't see the inside of the wardrobe at ordinary times.

So this overall appearance, as well as some grades, it is no worse than some high-end furniture. Therefore, we can buy some hot melt adhesive seals when customizing, so that this problem can be well solved.

Some simple operations At the same time, when we buy hot melt adhesive seals, we can pick up some irons at home, and then we can use some wood veneer in the back, and then apply some white glue on both sides. Then when they're dry, iron them on with an iron, and when they're melted, we can get a utility knife. Then remove the excess skin next to it, and then use fine sandpaper to polish it can be very beautiful.

At the same time, there is no need to find a special person to make it, because you can solve this problem well at home.

Choose a better waySo when we are working on our own furniture, we can also think of some other methods, but this method needs to be considered by yourself. Only then can you choose a better way to make your furniture cleaner and cleaner, or you can also take some of the statements of other people on the Internet, but make a summary so that it can be more applicable to you.

It is best to choose some masters with good craftsmanship, so that this problem can be solved, their craftsmanship is very good, and this situation generally does not occur.

You should use some professional tools that can help you remove glue marks very well, and the results are also very good.

The glue should be applied inside, applied from the inside, and edged so that no visible marks appear.

You should find some professional teams to do it, they do it perfectly, much better than what you do, and it is also very time-saving.

The quality of edge banding determines the longevity, beauty and green health of the family. Tightly banded panels not only make furniture look more beautiful and smoother to the touch, but also effectively control the formaldehyde emission of the panels, making our kitchens more environmentally friendly. But edge elastic bands are often not valued by consumers.

Consumers who don't know how to do it are so-so. The cabinet and seal are tight, and the sealing performance is good, which can effectively reduce the release of formaldehyde.

You can feel the quality of the edge banding by touching it. The edge banding of high-quality cabinets is delicate and smooth, with a good feel, and the inferior edge banding is just the opposite, some of the edges are more fragile and break when broken, and the edges with good toughness are not easy to break, and at the same time can reduce the release of formaldehyde. PVC edge banding is a series of plastic covers with polypropylene or polyvinyl chloride as raw materials and mechanically pressed wood grain, penetrating core, plain and two-color series.

It has the characteristics of heat resistance, oil resistance, strength, hardness and high bending. Its surface properties are good, wear resistance is good, and it can be cut. Melamine is a high-quality colored base paper, printed with a variety of wood grain, flowers, leather patterns, marbling and other artistic patterns (or pure color), and then dipped in personalized melamine paper with a cured paper cover.

The edge banding in ABS is one of the most advanced materials in the world, and the edge banding seal made with it is not doped with calcium carbonate, and there will be no transparent, smooth and white phenomenon after modification.

You can check if the back of the edge banding is flat, cross the edge with a flat-bottomed blade to see if it is straight or non-straight, and if it is not a straight line, whether there will be thick rubber lines on both sides behind the edge. Check whether the surface of the lid is smooth and whether there is any noise. If there is noise or pinholes, it can be made with **sundries pvc.

Whether the sides of the trimmed plank are even, if they appear jagged, it may be due to the following reasons: the trimming knife is too dull. The edge elastic is too stiff.

There is too much calcium carbonate in the edge banding. Draw the cover with your fingernails or other tools. When breakage, the surface wear resistance and hardness of the mark do not meet the standard, which proves that the quality of the mark is not up to standard.

Make sure the saw blade of the board is flat. For example, when sawing, the blade size is different, and the sawing surface has small steps, which affect the edge. Please make sure that the hot melt coating is not too thick.

Confirm that the thickness and pressure of the edge banding machine have been adjusted. Use a small seal to seal the edges, then tear it vigorously to ensure that the adhesive strength of the edge banding and the hot melt is reasonable and even. If the strength is insufficient, check whether the temperature of the edge banding brush meets the use standard.

1.It is to choose some decoration items that are pasted directly on the top, 2You can also stick the glue on the back of the tile and don't let it spill out, 3

Choose better quality, 4Choose a better glue, 5After finishing, use other materials to banding edges.

The specific method is to use nails instead of glue, or you can use buckles instead, you can also use some good edge banding machines, and you can also use some hot melt adhesive, so that there will be no marks when dry. You can also ask some professional masters to do it.

At this time, you can seek the help of professional workers, and you can also use some glue without traces, or a lighter glue, such as white, and then you can also use a blade to remove the overflowing glue line in time, and you can also use a hair dryer to dry it in time.

What should you do if you want to be free of glue marks and glue lines in furniture edge banding?

Dear, I'm glad to answer for you: If you want to do no glue marks and glue lines in the edge banding of furniture, the practice is as follows: 1

Check whether there is glue in the glue box of the edge banding machine, and then turn on the machine and preheat it to 190-230° (according to the vertical roll, the temperature difference time is about 10-30 minutes). 2.Confirm the color and specification of the corresponding plate edge banding tape, and start the next operation of edge banding.

3.The edge banding host can start to debug the machine, mainly according to the thickness of the edge banding belt to adjust the pressure of the pressure wheel, adjust the edge trimming knife and scraper of Beichang, and adjust the height of the pressure wheel according to the thickness of the plate, the counting table reflects the value of 180 when the conventional sealing of 18mm thick plates, but the slight wear of the pressure wheel can be considered according to experience. Fine-tune the edge banding machine to adjust the parameters of the accuracy test after the test to confirm whether the edge is within 20mm, whether there is a chewing edge, whether the glue line and the guide circle are regular, and whether the bonding is firm.

The edge banding of furniture should be made of furniture edge banding glue.

Furniture edge banding adhesive can be divided into three categories according to the different base materials:

EVA (ethylene vinyl acetate copolymer) binder hot melt adhesive, which can be divided into two types: filler and filler. The use of EVA as the binder is the most common technology for the production of furniture edge banding, and its main limitation is its poor heat resistance. The ambient temperature of panel furniture with EVA hot melt adhesive edge banding should not be higher than 120°C;

Pol Yamide (polyamide) binder hot melt adhesive, this hot melt adhesive has the characteristics of good heat resistance and fast curing, the main disadvantage is that it is expensive.

HMPU (polyurethane) base hot melt adhesive, it is the best performing type of hot melt adhesive, is the guarantee of high-quality sheet edge banding. It's expensive and requires a special way to use it.

The performance of furniture edge banding adhesives.

1. The viscosity of furniture edge banding glue.

The viscosity of furniture edge banding adhesive does not directly reflect the performance of the adhesive. In general, the higher the viscosity of furniture edge banding adhesive, the better its initial tack strength, but the worse the coating performance. Low-viscosity hot melt adhesives have a smaller amount of glue and better wetting properties.

Some hot melt adhesives with low viscosity and fast curing speed may also have high initial tack.

2. The density of furniture edge banding glue.

The density of furniture edge banding glue is generally in, and its density depends on the amount of filler.

3. The softening point and use temperature of furniture edge banding glue.

The softening point is an indicator of the heat resistance of the furniture edge banding adhesive, and the higher the softening point, the less likely the furniture edge banding adhesive is to melt. At the same time, the softening point is also an important aspect to measure the temperature resistance of panel furniture.

4. The opening time of furniture edge banding glue and the feeding speed of edge banding machine.

Furniture edge banding adhesive is widely used in the market because of its solvent-free, water-resistant, environmentally friendly and other characteristics.

Do you need hot melt adhesives? Edge banding veneer can be used.

Look at what kind of edge banding, generally EVA hot melt adhesive.

Hot melt adhesive is sticky when it is softened by heat.

Hot melt adhesive is environmentally friendly, non-toxic and harmless, and ConocoPhillips is good, you can try it.

I am Zhu of the factory price direct sales furniture edge banding hot melt adhesive in the Northeast.

You can consider all-purpose glue, which is common in the market and has the highest usage rate.

The edge banding of furniture is generally used with edge banding glue, which is the most suitable for use with the edge banding machine. Good glue, like Yongdun edge banding glue, horse head edge banding glue, Legu edge banding glue, these are good, mainly because the stability of the glue is good.