What is the reason why the inside of the mechanical watch will sound when it shakes?

It's normal to make a sound, because the mechanism composed of dozens of gears is not 100% tightly integrated. To turn and work often, so there will be sound. Whether the watch is running properly or not depends on whether it runs accurately and whether the power reserve is sufficient.

Also, don't shake your hand-wound watch too much, especially if it's ultra-thin.

Hello is a normal phenomenon, now the rotor is mostly ball bearings, there must be a sound when rotating, but the difference between the sound is big and small. Automatic watches are an improvement of manual mechanical watches, in which an oscillating weight is added to the watch, and when worn, the oscillating weight in the watch can be rotated by the movement of the wrist to achieve the effect of winding. Mechanical watches should be divided into three types: fully automatic mechanical watches, semi-automatic mechanical watches, and mechanical watches.

The only difference between the automatic mechanical watch and the ordinary mechanical watch is that there is no manual winding handle in the automatic mechanical watch, but a rotating hammer around the clockwork gear is set in the watch, when the human hand is moving, the hammer will do a small circular movement, drive the clockwork gear, the clockwork is full, when the clockwork is tight to a certain extent, the hammer is still moving, the gear is idling after the clockwork is full, and the clockwork is no longer energized.

It may be that the internal fittings are loose. It is recommended to send it for repair and let the repair carefully inspect the interior.

It is a normal phenomenon, and now most of the rotors are ball bearings, and there must be a sound when rotating, but the difference between the sound is large and small.

China is the world's largest producer of watches and clocks. China's watch manufacturing industry has gradually formed a cluster development structure with small and medium-sized enterprises as the main body, private enterprises and foreign-funded enterprises.

Rapid expansion (more than 70% of the total number of enterprises). The Pearl River Delta of Guangdong has been formed.

Region, Fujian, Zhejiang, Jiangsu, Shandong, Tianjin and other six major production areas.

Although the development of China's watch industry has made great progress, it cannot ignore Chinese enterprises and their brands in the international market.

The credibility and influence of China are negligible, accounting for 70% of the world's production but only 30% of the world's output value. The problems in the watch industry are also obvious. Industrial transformation lags behind the upgrading of consumption structure; The structural contradictions of watch products are prominent.

On the one hand, the backlog of low-end products is serious, and its production capacity is a large amount of surplus, on the other hand, the effective supply to adapt to high consumption is insufficient, and its high-tech and high-end brand-name products still rely on imports.

Therefore, at present, China's watch industry needs to accelerate the pace of technological innovation and develop the core technology of enterprises; Strive to improve product quality and create domestic watches; Do a good job in adjusting the product structure and adapt to market changes; Do a good job in the construction of the staff team, the introduction and training of talents, etc. In order to improve the international competitiveness of China's Chinese industry.

Summary. Hello dear! I am glad to answer for you 1, it may be the sound of the movement of the oscillating weight of the automatic watch 2, it may be the sound of the watch making relatively thin, and the back cover rubs the oscillating weight 3, it may be the sound of the movement shaking due to the loosening of the screws of the movement 4, it may be the sound of the screw falling off the movement, this kind of easily damaged movement should be repaired immediately.

Hello dear! I am glad to answer for you 1, it may be the sound of the movement of the dusty rotor of the automatic watch 2, it may be the sound of the watch Piki key making is relatively thin, and the sound of the back cover rubbing the rotor 3, it may be the sound of the movement screws loosening and causing the movement to shake 4, it may be the sound of the screw falling off the movement, this kind of Rongfeng Brigade is easily damaged and the movement should be repaired immediately.

You've done a great job! Can you elaborate on that?

Dear, the reasons for the sound of the mechanical watch moving late are as follows: 1. It may be the sound of the movement of the oscillating weight of the automatic watch 2, it may be that the watch is made relatively thin, and the sound of the back cover rubbing the oscillating weight is good 3, it may be the sound of the movement shaking due to the loosening of the screws of the movement 4, it may be the sound of the screws falling off the movement, and the movement should be repaired immediately.

Summary. Hello, dear dear, happy to answer for you, oh <>

<> mechanical watch shakes and there is a sound because of the mechanical version of the watch, it is normal for there to be a sound in the watch when it is shaken. Most of the movements used in mechanical watches are self-winding. Therefore, there is a winding structure on each movement, called automatic hammer superinteraction.

This automatic hammer is cantilevered. When the watch is shaken, the hammer turns on the movement, making some noise due to friction. In the case of a quartz watch, it may be caused by damaged or loose parts.

When the mechanical watch shakes, there is a sound, what's going on.

Hello, dear dear, happy to answer for you, oh <>

<> mechanical watch shakes and there is a sound because of the mechanical version of the watch, it is normal for there to be a sound in the watch when it is shaken. Most of the movements used in mechanical watches are self-winding. Therefore, there is a winding structure on each movement, called automatic hammer superinteraction.

It was not judged that this automatic hammer was cantilevered. When the watch is shaken, the hammer rotates on the movement, making a loud noise due to friction. In the case of a quartz watch, it may be caused by damaged or loose parts.

If you can find the relevant information here, you can take a look at <>

<> mechanical watch is shaking, rattling, rattling Automatic mechanical watch in the table added a rotor, when people wear, the oscillating weight in the watch will rotate due to the movement of the wrist, so as to achieve the effect of the wind, the watch is set up around the clockwork gear can be rotated heavy hammer, when the human hand is moving, the hammer will do a small circular motion, drive the clockwork gear to take the mold, the spring is full. This is the process of powering an automatic watch.

As they move, they naturally hear some sounds.

First, people who have worn an automatic cruise ship mechanical watch know that the watch is a simple situation where some sounds can be heard, if it is continuous, regular sounds are normal, you may not be used to it at first, but after a long time, it is good to get used to it. This is the sound of the watch being set inside the watch at work. If the sound is irregular, and accompanied by abnormal grinding sounds, it is necessary to take it to a professional watch repair place to check it to see if there is a problem.

<> second, the sound is audible to close listening, but not so intrusive as noise. When no one is there at night, it is more real, and when it is working normally during the day, because there are more sounds, the sound of this watch is easily drowned out. The important thing is that this is a rhythmic sound, which is the sound of the normal operation of the watch, and it can also give you a very reassuring feeling after listening to it for a long time.

Summary. It is normal for a mechanical watch to shake and make an abnormal sound, because the mechanism composed of dozens of gears is not 100% tightly integrated. After all, it is necessary to rotate and operate frequently. If you stop moving, it means that the internal parts have fallen off and need to be repaired.

It is normal for a mechanical watch to shake and make an abnormal sound, because the mechanism composed of dozens of gears is not 100% tightly integrated. After all, it is necessary to rotate and operate frequently. If you stop moving, it means that the internal parts have fallen off and need to be repaired.

I'm a second-hand auction watch from ice, and it will stop as long as I don't bring it for 10 hours, whether it's fake or not.

If it is an automatic table, this phenomenon is relatively common.

When the automatic watch appears to stop after the first should be checked, whether the watch is in a stationary state for a long time, if it is not worn for a long time, or with the hand, it is in a relatively stationary state for a long time, because the watch is automatically wound by the swing generated by relative movement, if the watch can not be automatically wound, it will lose the ability to run, and there will be a stop