On one side is the wall tile, and on the other hand, there is no wall tile, how to connect and look

If you want to tie it first, you only need to paste the wall tile directly on the side of the wall tile, and then you don't need to paste it if you don't paste it, just scrape it white.

Or paint with latex.

It's all possible.

Generally pasted into bricks, generally not pasted wall tiles, if you want to look good, you can do a decoration in the middle, for example, you can make a painting, for example, you can make a other decoration, like a plant wall, etc., these are also very good to connect.

If there are wall tiles on one side and no wall tiles on the other, then you can make a horizontal line between them or put a bookshelf between them, so that the connection will be more natural.

In fact, as long as it is relatively symmetrical, it looks good even if it is not docked. Mainly because I am worried that the oil smoke will be difficult to clean up without tiles for a long time.

One side is tiled, the other side is not tiled, how to think of the junction with the tile and the non-tile, you can use another good-looking cabinet or wine stick in the middle, so that the connection is particularly elegant and good-looking.

One side is with wall tiles, and the other side is not with wall tiles. When connecting, there are no wall tiles and wall tiles, and it is good to draw a good picture together.

If I have tiles on one side, there are no tiles on the other side, so if you want to make the splicing look good, you only need to make a good chamfer between the tiled piece and the non-tiled piece. This way you can have a very good connection.

If you want to look better at the joint, you can consider using it for a day in the middle, using some waist lines and the like, and the kind of bricks that are a little smaller can be pasted to look good.

I think that if you have wall tiles on one side and no wall tiles on the other, you should not have any connections in the middle, or paint a little color.

You are talking about the problem of home decoration, one side is tiled, one side is not tiled, and the middle needs to be made a sub-mouth edging.

While sticking wall tiles and not sticking wall tiles, if it is in the middle, it is best to put one. Transitional diagrams.

There are wall tiles on one side, but there are no wall tiles on the other, and if you want to connect it, you can still make some murals.

If you try to add a transition to this connection, I think it looks better.

One side is like a tile, and the other side is not a wall tile, how can it be connected and look good? I don't know if you're talking about the kitchen or the bathroom, it depends on where you are? What is the place? This has to be seen in the field to be seen.

Ask your wall to be pasted on one side without tiles, how can it be connected and look good, you paste the wallpaper of a similar color.

It's sure to look good when connected, because it's designed in such a way that it's in line with today's aesthetics.

If you paste tiles, you must pay attention to one of their lines, which must be aligned with this is important.

One side is tiled, generally not tiled, so it is best to use fireproof board to paint and connect.

One side is pasted with wall tiles, and the other side is not pasted with the front wheels, how to connect and look good, and it looks good with tiles.

The living room is the area where people move most indoors, and it is also the main place for people to entertain guests. In order to make the living room look more beautiful, many families will put the living room wall with wall tiles. Is it good to put wall tiles in the living room? In this article, I will tell you about the wall tiles in the living room.

Is it good to put wall tiles in the living room? Of course it's good. Pasting wall tiles on the living room wall has the following three benefits:

1.Elevate the living room.

The walls of most family living rooms are solid colors, and in addition to painting, the walls of the living room are generally not decorated too much, which leads to the same living room design in most families, which is too common and featureless. In addition, painting the walls alone does not make the living room look high-end. Is it good to put wall tiles in the living room?

If people put wall tiles on the walls of the living room, the overall effect of the living room will be different. First of all, there are many patterns of wall tiles, and the wall tiles of different patterns are pasted on the wall of the living room, which can make the wall of the living room show a different appearance and make the living room have more changes; Secondly, the texture of the wall tiles is better than the texture of the paint, and the wall of the living room can be pasted with wall tiles, which can improve the grade of the living room.

2.Prevent the wall from getting wet.

Is it good to put wall tiles in the living room? Pasting wall tiles on the wall of the living room also has the advantage of preventing the wall of the living room from becoming damp, which will cause the wall to turn yellow and the wall to bulge and fall off. If you only apply a layer of paint to the wall of the living room, when the weather changes and the moisture in the air increases, water droplets will appear on the wall and become damp.

If the wall is in a damp condition for a long time, it is easy to yellow, bulge, and even fall off the wall ash. If you use wall tiles to pave the walls of the living room, there is no problem in this regard.

3.Keep your walls looking new for years to come.

Is it good to put wall tiles in the living room? Pasting wall tiles on the living room wall can also keep the living room wall tidy and new, even if it is used for 20 years, the smoothness and brightness of the wall are still the same. The tiles do not have the problem of fading and fading, and the service life is much longer than that of wall paint.

As long as there is no human destruction, the service life of wall tiles can reach decades.

Is it good to put wall tiles in the living room? Of course it's good. Sticking wall tiles in the living room can not only improve the grade of the living room, prevent the wall of the living room from yellowing and falling off, but also allow the living room to maintain the original decoration effect for a long time, which can be described as a lot of benefits.

Generally, it is best to paste the tiles near the washbasin and shower room to a meter height. However, it is recommended that the bathroom can be fully tiled to the ceiling, which is the best. In the middle, you can also do some waistline treatment, so that some changes are also more beautiful.

You can choose some light-colored tiles in the bathroom, and by the way, I remind you that the bathroom must be waterproof.

Kitchen bathroom wall tile height.

Stick it a little higher than the ceiling. The kitchen of the rough room can reserve 10-20 for the ceiling, and the bathroom can leave about 25. If you want to save money, you can also use cheap tiles to cover the place that the cupboard can cover.

I see so many homes are basically so paved, the kitchen integrated ceiling LED lights need to leave a 15 cm ceiling, bricks on the ceiling can block the part of the floor, you can ask the ceiling master OK. Can you give points?

Generally, it is pasted to the top, that is, the bottom of the top cast-in-place board, because there is more water vapor in the kitchen and bathroom, and the wall is exposed to moisture for a long time, and it is easy to peel and fall off, so most of the wall tiles are pasted to the top, if your kitchen and bathroom need a ceiling, it can also be pasted to be level with the ceiling, but it is not recommended to do so. It should also be noted that before pasting wall tiles in the kitchen and bathroom, you must remember to do waterproofing, and do a closed water test, and then paste the tiles under the condition of ensuring that there is no water leakage.

The kitchen bathroom is generally 2.4 meters

Toilet. Bathrooms are generally divided into dry and wet areas, and as the name suggests, dry areas are areas where there is rarely water running out, such as washbasins and toilets. The wet area is the shower area, and the waterproof requirements are different in different areas.

Dry area: the floor is all done, and the wall is high.

Wet area: the ground is all done, and the wall is not lower.

Kitchen. There is very little floor water in the kitchen area, unless there is a leak under the sink or it is manually flushed. Therefore, the ground is waterproof, and the wall is generally made high or not.

Generally speaking, the construction sequence of the living room should be the wall tiles first, then the ceiling, and finally the floor tiles, because when the wall brick construction is carried out to the top, it is not easy to construct the edge, and there will be problems such as uneven guarding the edge or the wall brick can not be constructed due to the quality of the roof.

Although the living room should be tiled first and then the ceiling, in reality, everyone will also determine the construction method according to the size and design of the room. For example, if the design style of the home is modern and the ceiling has no angular lines, in fact, you can consider making wall tiles first, so that the ceiling will look better.

If the design is a European style, the ceiling has an angular line, then you can do the ceiling first, when the time is closed with an angular line, if you stick the wall tiles first, the top of the wall tile is slightly higher than the elevation of the finished surface of the ceiling, the side keel of the ceiling is fixed on the wall tile, and then the wall tile and the side keel interface are glued and closed.

So if it is an ordinary decoration, there are no special regulations, the living room should first hang the ceiling and then paste the wall tiles, after all, this effect is the best, otherwise there will be a mistake, and the need for a second rework will be troublesome, and the construction period will be delayed.

The length is calculated according to the net length of the main wall; Height: Those without wall skirts are counted from the indoor ground to the bottom of the floor slab, and those with wall skirts are counted from the top of the wall skirt to the bottom of the floor slab; If there is a suspended ceiling, add 20cm from the indoor ground (or the apex of the wall skirt) to the lower edge of the ceiling. The area occupied by doors and windows should be deducted (1 2), but the baseboard, mirror line, the area of the hole with a single area of 0 3 square meters and the area of the junction between the beam head and the wall should not be deducted.

When inlaying stone and wall tiles, the area of the actual paving is calculated in "square meters", and the area of the baseboard installed is calculated according to the net perimeter of the interior wall of the house, and the unit is meters.

Wall tile area Floor tile area open square root House height 4 - door area - window area.

Three scenarios one. The master and you charge money according to the area, which is the kind of money that sticks one square meter to charge you, and one more square meter will charge you an extra square meter. Two.

The master has a rebate where you buy tiles, and he will get an extra share of money if you buy an extra square meter. Three. The master is easy to use, more is better than less.

What if he breaks it when he sticks it.

How much more?

You can take a ruler and calculate the area yourself.

Good luck.

To put it simply, the actual area you buy and sell bricks is calculated. But the tiler master counts the actual number of blocks. For example, the floor of your bathroom is 300*300.

You and the brick seller are counted, plus 7% loss, that is square meters. But the master calculated that 6 pieces of horizontal and vertical had to be laid, and then 7% of the loss was added, and it would be square meters (if the master would plan, it would be less than this number). Why count 6 pieces?

Here I will explain to you, the shop 5 pieces are left with 2 cm, and the 2 cm on the side is not only difficult to cut, but also not good-looking. So you have to count 6 yuan. And because you only have one toilet, and there is no place to use the parts that are cut, so you have to stay, so it's like the landlord said a lot more.

It is recommended that the landlord ask the master to plan to paste these cut bricks under the cabinet, which is just a suggestion.

Counting the loss, there won't be so much, it's a pit for you.

Do the math yourself, and then figure out the excess.

According to the normal procedure, the floor tiles are pasted first, and then the wall tiles are glued - the wall tiles press the floor tiles, the gaps are easy to deal with, and it is conducive to waterproofing!

It should be the wall first, then the ground, and then the wall.

Stick to the wall first, and leave a brick below at a distance of not sticking. The reason is to stick to the wall first, so that the ground will not get too dirty.

After pasting, cut the bricks according to the actual situation, and then make up the corners of the wall, so that the wall tiles are pressed on the floor tiles, so that the water on the wall will not flow to the floor tiles.

1. All the wall tiles are pasted first, and the floor can be made into a movable type, and it can be installed directly after being made outside.

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then stir with water, which is basically zero pollution, high adhesion, and preferential treatment.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that it is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

Tile is a process that every home decoration process will go through, whether it is floor tiles or wall tiles, it is an indispensable part of home decoration projects. However, for this long-standing construction is now also changing, in recent years, the emerging tile adhesive is impacting the traditional cement construction process, how these two construction processes are, let you understand together.

1. Traditional construction.

Traditional tile construction is mainly based on cement, which is also the most common construction method. I don't know how the ancients pasted it, but I think it was mostly glutinous rice juice mixed with mortar. In modern times, cement and medium sand, or pure cement are mainly used as binders.

2. Tile adhesive.

Tile adhesive is also known as ceramic tile adhesive. In fact, tile adhesive itself also contains the composition of cement, which is a new type of material suitable for modern house decoration by adding a variety of scientifically proportioned additives on the basis of high-quality cement. At present, the degree of use in China is not large.

3. Contrast. In order to ensure the adhesion of the tile, the tile needs to be wet first, and then it can be constructed, and there are few factors that affect the construction.

Tile adhesive construction is also called dry pasting method, and the construction of tile adhesive is more complicated. Before construction, the adhesive should be stirred in proportion, and there are high requirements for construction time and temperature.

Although cement is a traditional construction method, cement tiles also have many shortcomings, such as easy sanding, hollowing, and falling off, which is a headache in the process of use. The adhesion of tile adhesive is very strong, and the thickness is also very small, usually 1-2mm, which is much thinner than cement.

Convenience to talk about the convenience of use, that is, of course, cement, is undoubtedly cement, in the decoration of cement is one of the substrates, the use is also convenient, bricklayers can basically do. The tile adhesive is different, not only to buy a special tile adhesive, the professionalism of the construction is also relatively high, the general bricklayer master can not do well.

Durability If both processes are applied correctly, the service life of both can reach the length of the life of the building. However, there are always various unstable factors in the actual construction, and the cement is more affected, hollowing, sand are the most common phenomena, from this point of view, the durability is undoubtedly the tile adhesive prevails.