How to clean sheepskin shoes, how to clean sheepskin shoes when dirty

1. Use a small toothbrush dipped in water with detergent to clean the dirty parts of the upper. If it gets plastered, use a soft brush. If there are mold spots on the upper, you can use an eraser to remove the mold spots, and then treat these stains with warm water and detergent, but be careful not to use a corrosive cleaning solution.

2. Then use a small toothbrush dipped in water to clean, be sure to thoroughly clean the detergent.

3. Finally, wipe it with a dry cloth, wait for the shoes to dry, and then evenly apply colorless shoe polish, and you're done. Be sure to clean your shoes before oiling, otherwise it will be difficult to remove the dirty area.

Second, the insole. 1. First of all, it should be noted that the insoles should be avoided as much as possible, if there is a peculiar smell, the insoles can be taken out and placed in an air-ventilated place to dry, or even use footwear deodorizer to remove the odor.

2. If the insole is dirty, you can rinse the insole under the faucet and wipe it gently with a soft brush, do not use any cleaning help, otherwise the surface fabric may fall off.

3. Place it in an air circulation place to air dry, do not use a hot air blower or a hair dryer to forcibly dry the insoles, otherwise the insoles may be deformed.

How to care for sheepskin shoes.

1. Storage. To store sheepskin shoes, you can put a layer of old socks on the surface to prevent dust from getting dirt when not in use, and then stuff a ball of newspaper or other waste paper inside. Keep your shoes in shape.

2. Rub oil frequently.

Use black shoe polish for black leather shoes, white shoe polish for white shoe polish, and use all-purpose shoe polish and colorless shoe polish if you can't get it. Different places use shoe brushes of different sizes, and generally multi-functional shoe brushes can be selected according to their actual conditions. When rubbing oil, you can add a drop or two of vinegar to make the shine of the shoes brighter and longer-lasting.

After rubbing the oil, use a brush to polish the upper after five minutes.

3. Keep dry.

If it is wet, wipe it with a dry rag, then dry it with a hair dryer, then apply shoe polish and store it in a cool place.

4. Dry after wetting.

If the sheepskin shoes are occasionally wetted by water, the leather shoes should be dried in a cool and ventilated place, and remember not to expose them to the sun, as they are easy to crack when exposed to the sun. It should not be dried or drained under a strong electric fan, otherwise the leather shoes will be warped and deformed and the leather surface will burst.

5. Wear it often.

Sheepskin shoes should be worn often, if you don't wear them often, the leather is easy to harden, so it is uncomfortable to wear, and it is not easy to mold when you wear it often.

6. Avoid sharp weapons.

Do not kick stones when walking, do not walk on mountain roads, this will prevent scratches, and if there are scratches on sheepskin shoes, you can repair them with crayons of the same color.

What you need to prepare: scouring pads, chopsticks, small bowls, water, dish soap, rags, white vinegar.

2. Pour an appropriate amount of white vinegar into a small bowl, as shown in the figure below.

<>4. Then use chopsticks to stir evenly, as shown in the figure below.