What should I do if I suddenly find that there are cracks in the bathroom tiles after four years of

The reason for the cracks in the bathroom tiles after the decoration of the new house is: the cracks in the tiles caused by the unqualified paste.

The solution is: if the paste is unqualified, you need to get in touch with the after-sales service of the decoration company in time, and ask for after-sales service to solve the problem of cracks in the tile.

If the adhesive is not qualified, it will cause many problems such as falling tiles after tiling. Traditional tiling usually uses cement mortar as a binder, while cement and mortar are usually mixed in a 1:1 ratio.

If the proportions are not uniform, the cement mortar cannot achieve the desired bonding effect.

You're in the same situation as I was before! It is also four years old, and my house may be more serious than yours, not only with cracks, but also with water seepage! My colleague recommended to me the orange outfit worry-free, I chose a kitchen and bathroom all-inclusive**, by the way, the kitchen was changed together, and the walls of the home were all repainted, which was great!

High efficiency, hassle-free, peace of mind!

If the crack is not big and will not seep water, it can be sealed with a beautifying sticker.

If the crack is large, or it has been loose and falling, it needs to be treated with anti-seepage water or sealed with waterproof glue, and then you can paste a beautification sticker.

If it doesn't work, then tear it down and renovate it.

It's only been four years, so it shouldn't be a big problem.

You can redecorate the bathroom.

When redecorating, use the materials well.

It is entirely possible for a new house to crack, and this building has a settlement period. After this time it stabilized. On the other hand, it may only be the cracking of the porcelain tiles caused by the tiling construction.

The cause of the settlement may be that many upper and lower households have cracks. No way, for any reason, it needs to be dismantled and re-bricked, and other places are fine, but the bathroom may leak. Let's take a look at the upper and lower households.

The cracked tiles can be replaced, and the amount of work is relatively small.

1. Crack repair.

If there are cracks in the floor tiles at home, you can use tile paste to repair the cracks of the floor tiles, which is because it can produce a smooth visual effect consistent with the surface of the floor tiles, and there are a variety of colors to choose from, hard and wear-resistant, so you can also use it to repair obvious cracks and play a role in covering up.

2. If the hard object is damaged, use toner to make up for it.

People will inevitably bump into the floor tiles in their daily life, resulting in damage or scratches on the floor tiles. If you don't want to replace the original floor tiles, you can use marble glue reinforcing agent, adjust the color to a similar color with toner, fill in the vacancy on the porcelain surface, and polish it after hardening, but this practice may cause different degrees of color difference.

3. Hollow corners.

If you find that there is a hollow drum on the edge of the tile, you can water the part of the partial hollow drum (smash the gap between the tiles with a small shovel, and then pour the cement with water into the gap, and the hollow drum will automatically suck in until it is filled and solidified), so as to avoid overall replacement.

4. Local hollowing.

A small amount of local hollowing of the tiles on the wall and floor, such as without affecting the stable installation of furniture and appliances such as cabinets, mirror cabinets, showers and water heaters, can not be treated, but if it affects the installation and daily life, it is recommended to knock this part of the tiles.

1. If the tile crack is slight, you can clean the wall first, use tile glue or waterproof glue to plug the cracks, and then fill the full slurry with caulk. On the one hand, it can increase the adhesion of cracked tiles and bond firmly again, and on the other hand, it can increase the waterproof effect and avoid the tiles falling off by moisture.

2. If the cracking of the tile is more serious, the tile needs to be removed and reinstalled. The wet paste method is used to pave the bathroom wall and floor tiles, and the tile adhesive is scraped on the back and base surface of the tile with a toothed scraper to form a strip shape, double protection, press the tile on the base surface, and knead it vigorously, which can effectively avoid the hollowing and cracking of the tile.

3. Tile cracking and hollowing. In this case, it is necessary to cut and crack the hollow tiles, and cut them from the corners of the four perimeters to form a cross pattern, which is convenient for the tiles to be removed and is not easy to damage the surrounding tiles. After that, the tile adhesive is scraped again and the tiles are paved.

Afraid of trouble: cut out the corners, stuff them with a little cement and grind them even

Don't be afraid of trouble: buckle down the whole piece and replace it with a new one

Relatively speaking, the space of the bathroom must be different from other places, usually the bathroom is basically very damp, and you must pay attention to the quality when choosing tiles. The water absorption rate of ceramic tiles should also meet high requirements, and there are many tiles in the bathroom, because of long-term water absorption that causes expansion, so when the weather is cold, there will be cracks and peeling or bursting. Basically, when this happens, the foundation of the wall must be very unclean, and it looks very dry on the surface, but the bottom of the tile has a lot of moisture.

The quality of cement and sand must be kept in mind when decorating, and the quality requirements must be passed. The quality of cement sand is also a quality problem, there are many cement grades that are very low, and they will fail after opening for a long time, and this stickiness will not be very high. Therefore, the wet bathroom with bad cement and sand will lead to the phenomenon of tiles falling off, in the construction of cement mortar must not be too heavy, cement water can not be too much.

When applying, it must be even, and try to choose a more professional tiling master when decorating. <>

Tile gaps are generally ceramic tiles are large and small, in the tile to leave the seam is to leave some appropriate, if the gap is too small, there will be thermal expansion and contraction of the imagination, squeezing each other will cause the edge to crack. The problem of general seams is also a common phenomenon, there are many people who always feel that the seams are not good-looking during construction, and they will not pay attention to the spacing of the seams, resulting in the squeezing of the glaze will shorten the life of the tiles. <>

Caulking problemsAt present, there are many people who usually have beautiful joints when decorating, and tile joints should be carried out after the tiles are dry, so as to ensure the quality of the tiles. There are many people who are very anxious, when pasting tiles, the effect of beauty seams will be carried out, which will cause the loosening of tiles, and it will be easier for tiles to fall off in the later stage, or there will be hidden dangers of safety.

It may be that the long-term dampness of the bathroom wall causes the glue to crack so the brick edge is cracked, or it may be that the wall tiles are not fixed with glue.

The wall tiles were cracked, and it can only be said that the quality of the wall tiles did not pass the test, and they were defective, and there was no good quality wall tiles at that time.

The edge of the bathroom tile is cracked, indicating that there is a hollow inside, and it is not completely glued, so this situation will occur, otherwise it will not crack.

It is because the temperature at home is relatively dry, or because there is a technical problem when laying bricks.

Wall deformationCracking of tiles caused by wall deformation will show regular cracks in transverse, vertical or oblique directions. Precautionary measures: Before laying bricks on the light wall, ask the construction personnel to test the wall to see if the wall is installed firmly; Secondly, it is recommended to make a layer of steel wire mesh on the side of the wall tiles to improve the strength and load-bearing capacity of the wall.

These little things will be handled by professional decoration, how much does it cost to decorate the house? Click here to calculate for free: [Enter the area of the house, and calculate the house decoration with one click**].

The so-called local maintenance is to repair the position of the tile on the wall of the bathroom, and the location without the problem does not need to be repaired. And now the new house has only been moved in for a short time, that is to say, the wall tiles of the bathroom can still be bought, and this type of tile will not be discontinued immediately, so it can be partially repaired.

Maintenance steps: First of all, according to the number of edge cracks and peeling tiles on the bathroom wall, the new tiles will be purchased, and then the problem parts of the wall tiles will be cut and eradicated, and then the new tiles can be paved. The overall maintenance is not troublesome, after contacting the tiling master to the site, the repair can be completed in one day, and it will not have any impact on daily life.

Precautions for this method: for the removal of the edge of the wall has cracked, peeling tiles, special attention should be paid not to destroy other intact tiles, because the wall tiles are too small when paving, it is easy to damage the tiles next to them, so when shoveling, the edge should be cracked with a cutting machine, cut around the peeling tiles, and then slowly remove, so as to ensure that the tiles next to it will not be damaged at the beginning.

Solution 2: Have a tile beautician beautify the tiles.

The so-called tile beautician is to contact a skilled master who specializes in repairing tiles after a small damage to the tile. Tile beautician can repair the damaged part to the same as the previous undamaged part without removing the tiles, so now the wall tiles in the bathroom are cracked and peeled, and it is also possible to repair them by the tile beautician.

Maintenance steps: first crack the edge of the side wall brick, polish and smooth the peeling part, then use special repair materials to smooth it, and finally color, so that the wall tile part can be complete, without edge cracking and peeling.

Precautions for this method: for tile repair, it seems very simple, but the requirements for professional skills are very high, not that anyone can do it, so the repair ** is very high, usually charged according to the point, a point is about 100-150 yuan, according to the repair point to calculate the total, the overall maintenance cost is very high.

If the wall under the tile cracks and tears the tile, then only remove the tile in this area and rectify the wall firmly.

If it is only the tile that is broken and cracked, then it is enough to replace the tile.

The first thing to look at is if there are any major construction projects around your home.

Your situation is a settlement problem, which generally has nothing to do with the renovation company.

If it is natural sedimentation, you can go to the quality supervision department to complain.

Please ask a friend to reply.

That wall of yours is.

What is the BAI structure? What material is it made of? If du is cast-in-place concrete, then dao

It is necessary to consider whether the bricking workers did not do a good job in the cement ratio during construction, and if it was a lightweight partition wall, did you hit the barbed wire when plastering, and then plastered? Is your tile crack in the corner or in the middle? In fact, many problems can be understood by just going to the scene.

Check the brand of tiles, see if it is a problem of tile quality, consider the relationship between decoration and property and ceramic tiles, one by one exclusion, who pasted the bricks, who bought the bricks, buy first and then paste, bricks are no problem, is not a good paste, in the push can play consumer rights and interests**, it should be possible.

It is estimated that the decorator is not properly constructed or the quality of the tiles is defective, so you still have to replace them all.

This is a problem for the renovation company

1. There are small cracks in the bathroom wall tiles, which is not particularly serious, and can be blocked with the same color structural adhesive. First of all, wipe the wall tiles clean, remove the dust in the crevices, and keep them dry. 2. Then apply the structural adhesive directly into the gap to close the gap, and wait until it solidifies later, these fine cracks will not be visible.

3. However, if the cracks are relatively large and more, it is recommended to remove all these tiles and replace them with the same tiles. If you use ordinary restoration methods, it may no longer meet the requirements and is not aesthetically pleasing.

1. If you want to avoid the phenomenon of cracking of bathroom wall tiles, you should check the quality well, buy tiles relatively speaking, buy relatively good quality, try to choose some big brands to build, it is not recommended to choose a few pieces, more than a dozen. Because the quality of such tiles cannot be guaranteed, it is easy to crack and fall off in the later stage, and it is necessary to spend money to repair it again, so it is better to buy a good product at the beginning.

2. To avoid cracking and hollowing of tiles, when pasting tiles, the adhesive of tiles, including the use of methods, etc., need to meet the standards. If you use tile adhesive, you can not add cement to it, if you use cement mortar, the paste mix ratio must be accurate, and there can be no deviation.

3. This phenomenon will occur, which may be due to the ceramic tiles, or it may be the reason for pasting the material. If you use tile adhesive, you can put the two components together and mix them evenly, and then paste them on the wall.

Bathroom tile cracking is selling what is the reason for the manuscript.

Reasons for the cracking of bathroom tiles: 1. Unqualified paste: Unqualified tile adhesive will also cause cracking, hollowing and falling off of ceramic tiles, so it is necessary to strictly follow the proportion when proportioning.

2. Wall deformation: The deformation of the wall skin will also make the tiles crack, so it is best to make a layer of steel wire mesh on the first side before paving the wall tiles, so as to improve the strength and load-bearing capacity of the wall.

Bathroom tile purchase skills.

1. When purchasing bathroom tiles, you can start from its surface, take out a tile at will to see whether its surface is smooth and intact, and whether the glaze is uniform and bright, whether there are spots or lack of glaze, if there are these phenomena, it means that there are quality problems in the tile.

2. When buying tiles, you can take one of them to knock on the other, if the sound of knocking is crisp and loud, it means that the quality of the tile is good, but if there is an abnormal sound after knocking, it means that there is a heavy skin or crack inside the tile.

3. When purchasing ceramic tiles, you can also use the method of dripping water to verify its texture, and drip water on the back of the tile. However, if it absorbs water quickly, it means that the density is sparse and the quality is not very good.