How to connect the microphone to the audio, how to connect the microphone of the audio

The steps to connect the speaker to the microphone are as follows:1. Insert the receiver's cable into the output hole on the receiver, which is the same as the microphone plugging in.

2. Connect the other end to the audio port of the amplifier microphone, and the audio port will generally have annotations, which need to be checked here.

3. Plug the power cord into the wireless receiver. Plug in the other end.

4. Install the battery of the microphone, pay attention to the positive and negative poles, and the small end to the large end.

5. Finally, turn on the power of the receiver, and then turn on the power supply of the wireless canister. The traffic light will show green.

6. Finally, turn on the switch and try it to check the connection status. If you want to adjust the frequency of the microphone, you can set the corresponding frequency.

Step 1Insert the receiver's cable into the output hole on the receiver, the same as the microphone plug into the void, as shown in the figure below.

Step 2Connect the other end to the audio port of the amplifier microphone, and the audio port will generally have a note here, as shown in the figure below.

Step 3Plug the power cord into the wireless receiver. Plug in the power supply at the other end, as shown in the image below.

Step 4Attach the battery of the microphone, paying attention to the positive and negative poles, the small end to the large end, as shown in the figure below.

Step 5Power on the receiver and then power on the wireless cartridge. The traffic light will be green, as shown in the image below.

Step 6Finally, turn on the switch and try it, and set the corresponding frequency, as shown in the figure below.

Step 1: A wireless microphone is a set of devices consisting of a transmitter and a receiver; Step 2, wireless microphones are complete, one is the microphone (there is a microphone and transmitter battery) and the other is the receiver, these two things must be a set, first of all, the frequency should be right, the transmitter is equipped with a battery Step 3, connect the receiver to the microphone jack of the audio (usually the amplifier) with an audio cable (randomly send one), turn on the karaoke function of the amplifier, turn on the microphone volume, and you can use the wireless microphone. Step 4, caused by the wireless microphone kit, first of all, the microphone and the receiver frequency alignment, and the volume of the receiver to the maximum, when the microphone speaks, see if the volume indication of the receiver will change, if it will change, it means that there is no problem with the microphone. Step 5: The fault may be in the receiver or the connecting line.

You can change a cable to see if there is an output, if there is no output, it may be a failure of the wireless microphone receiver. It needs to be repaired. Step 6, the wireless microphone to connect to the audio, you need to use the audio cable to connect the audio output of the wireless microphone receiver to the mic input of the audio.

Step 7: There is no sound after the wireless microphone is connected to the speaker, which should be divided into two situations. One is the lack of output caused by the sound, you can use a wired microphone to test, whether there is sound, if there is sound, it means that there is no problem with the sound. Then our connection is a success.

How often does this look from **?

1.Confirm that the microphone jack is connected correctly. 2.

See if your microphone is muted. Solution: Double-click the speaker in the lower right corner of the screen to open the audio control panel, and then remove the check mark in front of the mute under the microphone (microphone) in the "Volume Control".

3.Confirm that the sound card driver is working. Workaround:

Put the sound card driver disk into the light driver and drive it according to the sound card manual. 4.If the settings, microphone, and connection between the microphone and the host are fine, you need to check whether the microphone is broken, and if so, you can only buy a new one.

The little horn is in**.

Wait a minute. <>

There is a review in the lower left corner.,Please like it.,Thank you for your support.,Excuse me.,Is there anything else you need to consult? If you have it, I will solve it for you immediately, I wish you a happy life, and I hope that I will have the opportunity to serve you again next time! If you have any questions, please ask

1. Find the audio interface of the speaker first, note that it is different from the general audio, it has two interfaces.

2. It's okay, plug in the audio cable with two connectors first.

3. In this interface, you can see the connecting cable, and then connect the other end of the audio cable to the adapter cable.

4. Insert the other end of the adapter cable into the OUT port of the receiving box.

Hello, very happy to solve the problem for you. How to connect the Bluetooth microphone to the audio operation steps are as follows: 1. Use Bluetooth connection to insert the wireless microphone receiver into the computer's sound card or independent sound card, and connect the speaker to the speaker output of the computer or independent sound card.

The microphone receiver is connected to the speaker, or the microphone jack of the amplifier. 2. Wireless microphones are matched with receivers, and the receivers are installed in the audio, without connecting wires, the audio is turned on, and the microphone switch is turned on. 3. The complete set of wireless microphones generally has a microphone, a receiver, an audio cable, and a microphone and transmitter battery in the microphone.

4. When connecting the wireless microphone to the speaker, connect the receiver to the speaker's microphone jack with an audio cable, then turn on the karaoke function of the speaker, and then turn on the switch on the microphone.

Dear, this question is up to me, it will take some time to type, please wait a minute.

1.As long as there is a microphone microphone interface on the speaker, it can be connected,Generally, the microphone interface on the speaker is an interface or an interface,Different interfaces can choose different microphones。 2.

Due to the different designs,Different brands,The interface may be different,There are also some speakers that don't have a microphone interface,If there is no interface, it can't be connected,Before choosing a microphone, look at whether the speaker can connect to the microphone and interface,Choose the applicable one。

The above methods can be connected to other microphones, but not all of them can be connected to other microphones.

If you think mine is helpful to you, you can give me a thumbs up.

1. First of all, put the battery of the wireless microphone into the microphone to ensure that the wireless microphone has sufficient power use, and after ensuring the power supply, connect the audio output interface of the receiver box and the audio input interface of the speaker with an audio cable, and connect the power supply of the receiver box.

2. Then turn on the Bluetooth of the mobile phone to search for the Bluetooth of the wireless microphone and click to pair, after the pairing is successful, the indicator light of the receiving box will flash and brighten, and you can use it after turning on the microphone switch of the wireless microphone.

The wireless microphone is divided into three frequency bands, the FM band. VHF segment, and UHF segment. The microphone is transmitted by the vibration of sound to the diaphragm of the microphone, which pushes the magnet inside to form a changing current, so that the changing current is sent to the sound processing circuit behind for amplification.

It can be plugged into the microphone through the input of the amplifier, but it is even more difficult if there is no front port of this amplifier. Of course, you can also use a wireless microphone to input to the front AUX end of the amplifier through the Bluetooth receiver.