-
In general, when using a drum roller, ordinary water is used to cool down and clean the surface, and when a rubber wheel roller is used, diesel is used, etc., but only when the sticky wheel or just starts rolling, after rolling for a while, the temperature of the surface of the rubber wheel rises, and it is not needed.
When rolling, mainly by spraying some solvent to make the wheel non-sticky asphalt mixture, such as diesel, etc., the oil film of the asphalt mixture is damaged, and the cost is also high, and some construction units use rapeseed oil, laundry detergent water, etc., some are also mentioned in the specification. Generally, a solution with a ratio of diesel fuel and water of 1:1 is used in general construction.
-
Yes, with rubber-tyred rollers.
When using diesel fuel to clean the surface, when using a drum roller, using ordinary water to cool down and clean the surface, it is only when the sticky wheel or just starts rolling, and after rolling for a while, the temperature of the surface of the rubber wheel rises, and it is not needed.
During rolling, the wheels are mainly sprayed with some solvent to make the asphalt mixture stick.
Like diesel, the oil film of asphalt mixture is damaged, and the cost is also high, and some construction units use rapeseed oil and laundry detergent water.
etc., some are also mentioned in the specification. Generally, a solution with a ratio of diesel fuel and water of 1:1 is used in general construction.
Road rollers belong to the category of road equipment in construction machinery, and are widely used in high-grade highways, railways, and airport runways.
The fill compaction operation of large-scale engineering projects such as dams and stadiums can roll sandy, semi-cohesive and cohesive soils, subgrade stabilized soil and asphalt concrete pavement layers.
-
If it is a metal wheel, it will not work if it is a plastic wheel, it will be corroded, remember to clean it after use.
-
Diesel is very corrosive to asphalt, and there must be quality hazards with diesel, but it is not too much of a problem.
If you are in the construction process, the superintendent, the owner does not allow you to use diesel, you can go and buy cottonseed oil to play, ** cheaper than diesel, and the effect is much better than diesel, and there is no damage to the asphalt.
-
Diesel fuel is corrosive and can make the asphalt soft.
-
Diesel fuel can dissolve asphalt, and if diesel fuel is used, it will dissolve the asphalt.
-
Cummins used turbocharging earlier than Shangchai. In terms of horsepower and machine parts, Cummins is better. And the sound is crisp, and the body of the car has no grease for a few years.
Relatively high technology content. All kinds of domestic accessories and maintenance systems are very complete, and it is very trouble-free in the later stage. I was very impressed when I came into contact with Cummins in '06.
-
Check the fuel pipeline, first see if there is oil leakage in the oil circuit, and then see if the diesel filter has not been changed for a long time, whether the diesel oil quality is good Generally, the Cummins engine speed loss is basically caused by fuel failure, and the engine needs to check the PT pump and fuel injector after 2000 hours of operation. Check it first and ask questions if you have any questions.
-
It's better not to add Oh, it's too dangerous, it's quite dangerous, or add water, you can modify the diesel injection system, professional rollers.
-
All I can say is that you're so creative. You can check out the new SSR200AC-8 of Sany roller, which may be able to add diesel.
Asphalt pavement. The advantages are: smooth surface, no joints, comfortable driving, low vibration, low noise, wear-resistant, dust-free and easy to clean, short construction period, simple and renewable maintenance and repair, suitable for phased construction, etc >>>More
The temperature of the initial pressure link is generally maintained between 110 and 140 degrees Celsius. The temperature of the recompression link of the road surface should be kept at 120-130 degrees Celsius. The temperature at the end of the final pressure should be greater than 90 degrees Celsius. >>>More
Asphalt pavement. Cracks may be caused by foundation settlement, which can lead to cracking of the surface layer. There is also a case of temperature cracks, due to the setting of temperature cracks. >>>More
In the highway pavement that has been built in China, more than 90 are semi-rigid base asphalt pavement. >>>More
Thiswithasphalt pavement structural layer!The asphalt pavement structure layer includes a surface layer, a base layer, a subbase layer, and a cushion layerIt belongs to the category of flexible pavement. >>>More