How to maintain dimming glass, how to maintain and clean dimming glass How to maintain dimming glass

1. The size of the film, up to 1800x5000, is the most important indicator to examine the technical strength of the seller. 2. The higher the power supply voltage of the membrane, the better the quality and the higher the transparency, and the glass with inferior quality does not dare to use the high voltage of 65V, and individual manufacturers can achieve 75V. 3. Light transmittance, in the case of the interlayer, the light transmittance should be more than 80%.

4. Privacy protection effect, when power off, it should be able to cover any object other than 3cm. 5. It should be processed by autoclave, so as to make a good product with a life span of up to 10 years, good safety, high-quality dimming glass products, and can be applied to indoor and outdoor all-weather fields. "

1.Collision avoidance.

The dimming glass should be handled with care during daily use, and try to avoid collision with hard objects. Colleague, once the dimming glass is installed, generally do not move it to avoid shaking and breaking.

2.Pay attention to where you place it.

Pay attention to the placement of the dimming glass, try to put it in a flat position, and avoid instability and breakage. At the same time, it should also be avoided in a location where the temperature is too high or humid in Thailand, which will affect the service life.

3.Take care to keep it clean.

After using the dimming glass for a long time, it will inevitably be stained, at this time, you can use a towel stained with vinegar or alcohol to wipe it, or you can directly buy a glass cleaner to clean it.

Dimming glass is a kind of glass that switches between transparent and opaque glass through electronic control, light control, etc., let's take a look at the maintenance method of dimming glass. Then I want to know the maintenance and cleaning of dimming glass. Method?

1. Anti-collision

Do not hit the glass surface hard, in order to prevent the glass surface from scratching, it is best to lay a tablecloth. When placing things on dimming glass furniture, handle them with care and avoid collisions.

2. Place and fix

It is best to place dimming glass furniture in a more fixed place, do not move back and forth at will, and place the objects steadily, and the heavy objects should be placed at the bottom of the glass furniture to prevent the center of gravity of the furniture from being unstable and causing it to overturn. In addition, it is necessary to avoid wetting, keep away from the stove, and isolate it from chemical reagents such as acid and alkali to prevent erosion and deterioration.

3. Wipe with a towel

Daily cleaning, wipe with a wet towel or newspaper, if stains can be wiped off with a towel dipped in beer or warm vinegar, in addition, you can also use the best glass cleaning agent on the market, avoid cleaning with a strong acid and alkaline solution. In winter, the surface of the dimming glass is easy to frost, and it can be wiped with a cloth dipped in concentrated salt water or liquor, and the effect is very good.

4. Wipe with a toothbrush

Once the patterned dimming glass is dirty, you can use a toothbrush dipped in detergent and wipe it in a circular motion along the pattern to remove it. In addition, you can also drip some kerosene on the glass or apply chalk ash and gypsum powder dipped in water to dry the glass, and then wipe it with a clean cloth or cotton, so that the glass is clean and bright.

5. Detergent cleaning

Using a damp cloth sprayed with detergent can also clean glass that is often stained with oil. First of all, spray the art dimming glass with detergent, and then paste the plastic wrap to soften the solidified oil stains, after 15 minutes, tear off the plastic wrap, and then wipe with a damp cloth. If there is handwriting on the glass, you can use an eraser soaked in water to rub it, and then wipe it with a damp cloth; If there is paint on the glass, it can be scrubbed with cotton dipped in hot vinegar; Wipe the glass with a clean, dry cloth dampened with alcohol to make it as bright as crystal.

Dimming glass is a laminated material, which is based on a dimming film sandwiched between two original pieces of glass. In order to make dimming glass, the dimming film is sandwiched between the glass, the dimming glass belongs to the customized products, the size is customized from the glass cutting, the required glass size is cut and opened, the glass is cleaned and then pressed together, which is the preliminary combination of glass and clips and other materials. Before putting the preliminary laminated glass into the autoclave.

After the process equipment is used for lamination, the edging is carried out, the high-speed bilateral edging machine is used for edging operation, and finally the product is inspected to provide factory certificate and other information, and the production process of dimming glass is probably understood.

Judge the advantages and disadvantages of dimming atomized glass.

The biggest feature of dimming atomized glass is that it is transparent when energized and foggy when powered off, which can not only protect privacy, but also achieve sound insulation performance of more than 35 decibels, and can also block 99% of ultraviolet rays.

The excellent properties of atomized glass are widely used in the construction, decoration, door and window industries and the automotive industry. Excellent products require high-quality raw materials and processing technology, however, the quality of products on the market is mixed and uneven. Ensen Energy Saving suggests judging the advantages and disadvantages of dimming atomized glass from the following four points:

How to make dimming glass? There are many ways to produce dimming glass, but the basic method used on the market is the lamination method, that is, the glass laminating machine is used to combine glass, dimming film and film.

The composition of dimming glass is a five-layer structure of "glass-film-dimming film-film-glass".

Structural diagram of dimming glass.

First of all, it is necessary to purchase the original glass. The original film is generally provided by large companies, and the manufacturer selects the thickness and color of the original glass according to the user's requirements, and then cuts the size, punches, and notches. Glass generally uses tempered glass with high safety.

Then cut the dimming film. Workers cut rolls or large-sized dimming films into slightly smaller sizes than the original glass sheets with a cutting machine. Then make the electrodes and solder the wires. If you want to display the partition graphically, you also need to perform laser engraving on the film.

Zonal graphic dimming glass.

After that, the prepared glass, dimming film, and film are stacked together in the clean room. Cut off the excess film at the edges, fix it with transparent glue, and then send it to the laminator for lamination.

Dimmable glass laminations.

If it is made with a laminated oven, the film is made with EVA; If it is done in an autoclave, the film is made in PVB. Generally, it takes about 2 hours for the fresh dimming glass to be baked.

The process seems to be very simple, but in fact there are many details that need to be paid attention to, otherwise the finished product is prone to defects, and the loss will be great. It is recommended to start with a small film, and then make a big film when you are familiar with it.

Dimming glass is a kind of laminated glass made of transparent glass EVA and liquid crystal dimming film by high pressure and high temperature. When the power is off, the liquid crystal molecules in the liquid crystal dimming film will be randomly arranged, scattering the irradiated light in all directions, giving the glass a frosted state. When energized, the liquid crystal molecules in the liquid crystal film are arranged in a perpendicular direction to the dimming film, so that the light passes through smoothly and the glass appears transparent.

Bulletproof dimming glass.

In order to make the dimming glass more functional and meet more customer needs, such as water research and development, the use of slow-release elastic film, and the generation of nylon damping film in the product and other processes, when the bullet hits the water dimming glass, the impact of the bullet is first released instantly, and then with high-strength PET and film nylon damping and other materials to firmly jam the warhead, so that the warhead can not penetrate the water-like dimming glass, so as to play a bulletproof role. This product has been approved by China Ordnance Equipment Group and China Ordnance Equipment Special Products Zhilian Supervision and Testing Center, and at the same time obtained the bulletproof dimming glass inspection report.

1.Privacy protection features. The transparent and opaque state of the glass can be controlled at any time.

2.Projection function. The intelligent dimming glass can not only dim the light, but also an excellent projection screen, and the projection effect is very outstanding.

3.Energy saving and environmental protection. In the energized state, the low power consumption is only 7W per square meter per hour.

The smart dimming film can block 60% infrared rays and 99% ultraviolet rays. Shielding infrared rays reduces heat radiation, and shielding ultraviolet rays can protect indoor furnishings from fading and aging due to ultraviolet irradiation, and protect personnel from direct ultraviolet rays and causing diseases.

4.Soundproofing. The intelligent dimming film is attached to the glass and has the effect of sound damping, such as the intelligent dimming glass of Haozhi Technology, which can effectively block all kinds of noise from Jichang Zheng.

5. Security. It has all the advantages of safety glass, including safety against glass splashing after breakage, good impact resistance, sound, heat and ultraviolet insulation.

Dear, I am glad to serve you, the answer is as follows: What is the dimming glass? It is a special glass that automatically adjusts the amount of light entering the room according to the intensity of the light. Maybe you've ever worn a type of color-changing glasses, right?

Its transparency is not the same indoors and outdoors. When you walk from indoors to outdoors where the sun is dazzling, the glass on the glasses will change color, in fact, it will become less transparent, so that the light entering the eyes will be greatly reduced, so as to achieve the purpose of protecting the eyes. The glass on these photochromic glasses is dimmable glass.

Not long ago, scientists invented a self-dimming window glass. When the weather is cold and the temperature is low, this kind of glass has high transparency, and the sunlight will all enter the room, so that the indoor temperature increases; And when it's hot, it becomes translucent, making the room cooler. How was this glass invented?

Everyone has eaten eggs, but they don't necessarily think about the funny phenomenon of eggs when they are cooked from raw to cooked. For example, the egg white of a raw egg is transparent, and the yolk inside can be seen through the egg white, but when the egg is boiled, the egg white becomes opaque. Inspired by the phenomenon that the transparency of proteins changes with temperature, scientists decided to develop a glass that varies with temperature (or the intensity of sunlight).

There are two brothers in Albuquerque Kisentuk, New Mexico, USA, the younger brother is Roy Chachru and the older brother is Dai Chachru. In order to invent this self-dimming glass, a cloud gum material was found that could change its transparency on its own with changes in temperature. It is a mixture of oily polymers and water, and at low temperatures, the oily components in it "freeze" the water molecules into a coat around the polymer fibers that resemble noodles, like a ball of thread, the insulating coat of bread, but the gum is transparent and can pass through most of the sunlight (more than 90%).

When the temperature is high, the "frozen" water molecules around the polymer fibers are "melted" and the polymer fibers are like noodles in boiling water, tumbling and twisting into a mess, and then the cloud gum changes from a clear and transparent state to an opaque white like a protein, which can block 90% of the light from penetrating. The cloud glue made by the Chachru brothers is a semi-fluid, its transparency is sensitive to temperature changes, 2 3 temperature changes can be transformed from transparent to translucent, this cloud glue semi-fluid sandwiched between two layers of clear glass (or transparent plastic), can be made into self-dimming window glass. The change of the transparency of cloud glue is still reversible, that is, it is transparent at low temperature, and when the temperature increases, the transparency gradually decreases, but as soon as the temperature decreases, its transparency will be restored.

To check if this glass dimming is sensitive, just put your hand on it. If your hand is placed on the glass and your handprint is left on it, it is a proof that it is effective.

1. Look at the manufacturer.

Dimming glass products are high-end glass products, which can be called luxury goods in glass, and of course, you have to choose products with quality worthy of their value. Most of the domestic general dimming glass processing manufacturers have a processing history of no more than 3 years, and there are few engineering cases (some manufacturers borrow engineering cases from each other to make false publicity), and the quality and reputation need to be verified by time, and more cautious when purchasing.

2. Look at the engineering case.

The most important thing to buy dimming glass products with stable performance and guaranteed after-sales service is to look at the relevant application engineering cases of the manufacturer. When we choose a manufacturer, we should not only look at the actual engineering case of the manufacturer, but also carefully check the real ** of the actual installation site of the manufacturer's dimming glass, rather than the renderings of the computer post-PS.

3. Look at the production equipment.

The general customer does not have a very thorough understanding of dimming glass, and when choosing dimming glass, blindly pursue low ** and blindly pursue permeability.

1.Privacy protection function: The biggest function of intelligent dimming glass is privacy protection function, which can control the transparent and opaque state of the glass at any time.

2.Projection function: intelligent dimming glass is also a very good projection hard screen, in a suitable light environment, if you choose a high lumen projector, the projection imaging effect is very clear and outstanding. (Rear projection imaging is recommended).

3.It has the advantages of safety glass, including the safety performance of preventing debris splashing after breaking, and has good impact resistance.

4.Environmental protection features: The dimming film and film in the middle of the dimming glass can insulate heat and block more than 99% of ultraviolet rays and more than 98% of infrared rays.

Shielding part of infrared rays to reduce heat radiation and transmission. The shielding of ultraviolet rays can protect the indoor furnishings from fading and aging due to ultraviolet irradiation, and protect personnel from diseases caused by direct ultraviolet rays.

5.Sound insulation characteristics: The dimming film and film in the middle of the dimming glass have the effect of sound damping.

Noise can be partially blocked. Dimming glass, literally, can be seen in this kind of glass, the characteristic of this kind of glass is that it can adjust the light transmission or opaque state. So what is the principle of glass dimming?

Is it the intensity of the light or the transparency? Let's take a look at its technical definition first. Dimming glass is a special glass for architectural decoration, also known as electronic curtains.

This is a product based on membrane technology, in which liquid crystal molecules are attached to the ITO substrate, and the electrodes at the translucent edge introduce an electric current to change the arrangement of the liquid crystal molecules by turning on the power supply, thereby controlling the transparency of the glass. The dimming glass can freely switch the transparency of the space, and it is a curtain that can be controlled remotely at will, and the privacy protection is under control.