Is there any way to make the stopwatch of Agelocer s watch go slower?

You can suck it up, and if you suck it up, he'll go slower, and he'll just go that fast.

If the second hand of the watch is slower, you need to turn down the power of the watch.

Or change the energy storage of the mechanical watch, the main thing is to stop the power source of the mechanical watch, and there is no longer energy storage to provide electricity.

There should be no way to do this, because the hands of the watch are set, and this is all gear turning, or the electronic watch is according to that time period.

If there is a problem with the watch, I recommend going directly to the watch after-sales center. After-sales is not only more professional technicians, but also the instruments are imported, more precise, and **also very transparent, will not be messy**. When not to go to a regular after-sales center.

Otherwise, if you are trapped, you can only blame yourself.

So try to put a magnet on the bottom of the watch, which may make the watch go slower.

Although this is a manual mechanical, its energy storage is 80 hours, and it is normal to wind it once in about three days, and there is a free winder, which is much more convenient than ordinary manual mechanical watches. Compared with automatic machines, manual machines are less likely to have problems during use.

Even if this mouse is made of braised noodles, the method may be to make his persistence consume. It's a little lower, so it might be a TV series, because it can't give him motivation.

For watches, its trend is accurate, we personally are not able to adjust, if you want to adjust, you must go to a special watch repair shop.

Maintenance common sense. 1) When wearing a watch, the sweat on your hands is corrosive to the case, the all-steel case has better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, long-term.

In contact with sweat, it is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic table holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.

4) Do not put the watch on the radio or TV to avoid magnetization.

5) Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a stationary state for a long time, so as to ensure the operation performance of the watch machine.

Is there any way to make my lover Qin's watch stopwatch go slowly, I think this person can do things in the parts.

The basic principle of adjusting the speed of the watch is to adjust the speed of the watch by changing the working length of the hairspring. If the length of the hairspring decreases, the unit time of the hairspring contraction becomes smaller, the frequency becomes faster, and the watch goes faster, and vice versa. The fast and slow needle moves to the outer pile, the working length of the hairspring increases, and the machine table slows down; Moving in the opposite direction, the working length of the hairspring decreases, and the watch machine goes faster.

The change in the working length of the hairspring determines the period of the hairspring vibration. If the fast and slow needle is rotated, the working length of the hairspring is shortened, the cycle is reduced, and the watch machine travels faster; If the fast and slow needle is rotated in the opposite direction, the working length of the hairspring increases, the cycle increases, and the watch machine travels slowly.

Open the back cover and adjust it yourself. There are two handles on the rotating pendulum, one is the hairspring, which is like the connecting post of the head of the spring, this must not move, and the other is a section that jams the hairspring, like a clip, and has to adjust it corresponding to the deck's + key + slow - fast.

If it's a famous watch, don't get it yourself, it's hard to repair if it's broken.

Mechanical watches are very delicate things, you can find after-sales service to adjust for you, if you are good, you can adjust it to about 10s, my mechanical watch is 5 6 seconds slower every day, and occasionally it will stop.

Mechanical watches are more precise, and you have to go to a professional watch repair place to be more reliable.

Normal, if you really don't think it's okay, then take it to the place where the watch was repaired and change it.

It may be that there is a problem with the watch itself, and there is also a problem with the speed??! You can.

The international standard stipulates that the daily error of ordinary mechanical watches is plus or minus 30 seconds, and the error is calculated according to 24 hours as a cycle, and cannot be accumulated, and it is not normal to have sixty or seventy seconds a day faster.

Yes, you can correct it when you go to the place where you repair the watch, it's very simple and doesn't cost much.

1.First, if there is a quality problem with the mechanical watch itself, it will cause the mechanical watch to slow down or go fast, and it cannot accurately reflect the time, which should be returned directly; 2.The second is the failure of the winding, the winding is to provide kinetic energy to the mechanical watch to move the pointer, if the winding fails, the mechanical watch will not be able to get enough kinetic energy, and it will slow down, so you can find a watch repairer to repair it.

The reason why mechanical watches are old and slow:

The amount of activity is not enough, and the kinetic energy is insufficient. Automatic watches need to be worn normally for about 8 hours a day, and need normal and appropriate amount of exercise kinetic energy to support time, and wearing 8 hours a day can support about 36 hours of time.

The watch is magnetized. Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop.

The movement sludge is dry. If the oil in the watch movement is dry, it will increase the frictional resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

How the automatic watch works:

On the basis of the structure of ordinary mechanical watches, an automatic watch is added to a part of the automatic mechanism device, which automatically winds up through the action of the wrist movement of the watch wearer in daily life. Printed on the dial"automatic"The words indicate that it is an automatic mechanical watch, which is also divided into a fully automatic mechanical watch and a semi-automatic mechanical watch.

To understand the principle of an automatic mechanical watch, it is necessary to understand its automatic mechanism, which is oscillated by a heavy hammer (automatic rotor), and the special function of automatic loading is realized by the connection of the automatic loading wheel train and the prime mover system.

1.Lack of power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when they are slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2.There is no maintenance, mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears, this problem only needs to clean the movement and re-refuel.

3.The mechanical watch has a complex structure, is composed of hundreds of precision parts, is very fragile, the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop. According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

There are two main reasons for the inaccuracy of the automatic watch, you can consider it comprehensively: First, the quality of the watch itself, such as the failure of the automatic winding, the failure of the pendulum, etc., can cause the inaccuracy of the time; The second is the problem of consumer use. The former can be concluded through the testing of the relevant national testing departments, if it is a quality problem, the business must be returned, replaced, and repaired according to the regulations.

The latter depends on the specific situation of the consumer, such as what kind of person wears it, and in what environment. The reasons for the inaccuracy of automatic mechanical watches due to consumer use include the following situations: The user's lack of activity causes the automatic watch to be unwinded, causing the watch to slow down or stop.

The elderly and those who often sit in the office and do not exercise much are not suitable for wearing such watches. The watch network is close to the magnetic field, such as TV, mobile phone, etc., which causes the watch to be inaccurate. The wearer itself has a strong magnetic field of the human body, which affects the timekeeping of the watch. Wish.

There is an error in the time of the watch, which is normal within a certain range, not necessarily because there is a problem with the watch, but it may be affected during wearing. There is never a watch with 0 error, but if the watch slows down by one minute or more, you need to consider whether the watch is malfunctioning. The hairspring is equivalent to the heart of the movement, if the hairspring is in the middle of the inner and outer clamps, the working length becomes longer and the watch slows down.

Unevenness, eccentricity, and excessive runout of the end face of the balance wheel may also rub slightly against adjacent parts, resulting in increased friction resistance, slowing down, or the movement sludge drying up, then time will go fast and slow. Therefore, mechanical watches should be maintained in 2 to 3 years. It is also possible that your watch has not been worn for a long time, the lubricating oil in the movement is prone to deterioration, and the parts may be worn.

In addition, the efficiency of the watch winding will become poor, causing the watch to go slowly or even not to go.

(1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is small, the automatic watch may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2) The impact of shock vibration: the violent shock vibration also has an impact on the balance vibration cycle, especially the low swing state or low frequency of the mechanical watch, as for the violent shock vibration has damaged the balance shaft tenon or hairspring, it will inevitably bring the mechanical watch time failure.

3) The influence of temperature change: the change of temperature will change the geometric size of the balance wheel and hairspring, and every small change in these key components will directly affect the first cycle, and the temperature will also change the viscosity of the watch oil, which will make the torque transmission and swing of the mechanical watch wheel train change to a certain extent.

It is normal for a mechanical watch to have a daily error of less than 30 seconds. Due to the different internal mechanical structure of each type of watch, under normal use, the error of mechanical watches or mechanical automatic watches is within 30 seconds per day (this standard is promulgated by national ministries and commissions), while the error of quartz watches is lower and more accurate. Mechanical watches are larger than quartz watches, and errors can occur due to the quality of the production and the susceptibility of the movement inside the watch to the influence of gravity.

Usually mechanical watches are calculated in seconds of daily error, while quartz watches are calculated in seconds of error in months. If you want to be accurate and timely, and finally replace the electronic watch, the mechanical watch needs to be calibrated and timed at regular intervals during wear.

Mechanical watch The oil inside the movement is dry or there is a problem with the movement Quartz watch The battery is low The battery is dead The internal problem of the movement should be sent to the service center for testing The address in Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

[Watch maintenance and repair can refer to the service center to go to 702, Xidan Joy City Office Building, Xicheng District, Beijing] to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. Magnetization of the watch: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

2. Lack of maintenance: mechanical watches are maintained every 2-3 years, and quartz watches are maintained every 4-5 years. Watch maintenance requires the movement to be completely disassembled, cleaned, oiled, reassembled, adjusted, and functionally checked; Repair or replace any worn or malfunctioning movement components.

If the watch lacks maintenance, it will cause the parts to wear out, the sludge will dry up, affect the normal running time of the watch, and make the watch appear fast and slow. Regular maintenance of the whole machine can effectively prevent the occurrence of various failures of the watch.

3. Mechanical failure: Mechanical failures such as watch hairspring failures, escapement system failures, and parts and components may cause the watch to appear fast and slow, so when the watch is abnormal, you can first pull out the crown and take it to a professional maintenance organization for the maintenance technician to check the reason.

The fast (slow) of a fully automatic watch is related to the following aspects:

1. The speed of a fully automatic mechanical watch is mainly determined by the pendulum frequency, usually the larger the swing, the smaller the pendulum frequency, and the smaller the pendulum, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structure of the problem. Due to the gravitational pull of the earth, the offset between the horizontal position and the vertical position will produce a displacement, and the mainspring will be unbalanced from the top to the loose, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. Magnetic field utility. After the hairspring is magnetized, the loops between the loops are only visible when worn, and there are sticky or brief loops, especially on the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, resulting in a change in time.

4. The balance of the balance wheel and the balance spring, especially the balance wheel. The balance wheel is very poorly balanced, which will cause the balance wheel to change the precision of the surface at a certain swing.