What will be the effect of jadeite blistering?

Please refer to below.

Jadeite soaking in water is also one of the ways to maintain jadeite. The main purpose of soaking jadeite in water is to give jadeite a moist environment and maintain the moisture and luster of jadeite. The water head is the characteristic of jadeite, and the jadeite that lacks water looks dry, lifeless, and not so moist.

What are the benefits of jadeite soaking in water.

The human body has such fine pores, jadeite as jade, as a mixture of a variety of minerals, how can there be no gaps in its joints, so a long time of soaking in water is enough to make water molecules.

Enter the inside of the jadeite. The biggest purpose of soaking in water is naturally to maintain the quality of jadeite, but water also has a great effect on the appearance of jadeite, making the surface of jadeite more moist, the water head is more sufficient, and the color will be more vivid. However, it is worth noting that the quality of jadeite determines the size of jadeite pores, the better the quality, the greater the density, the smaller the gap, so the longer the need to soak in water, on the contrary, the better the quality, there is no need to soak for so long, but because the pores are large, it is also easier to lose water, so low-quality jadeite should often be soaked in water.

Precautions for soaking jadeite in water.

1. Do not soak in tap water. Because the chlorine in the tap water will gradually corrode the surface of the jadeite bracelet, and soaking for a long time will make the quality of the jadeite deteriorate and affect the wearing effect, so it is best to choose the best bottled pure water on the market to soak the jadeite.

2. When soaking in water, pay attention to choosing a place with moderate temperature and humidity when choosing a place, so as not to inadvertently destroy the beauty of jadeite and jade.

3. If the jadeite is not worn for a long time, the moisture inside the jadeite will be lost, affecting its beauty. Immersing the jadeite in water can replenish water to a certain extent and keep the jadeite hydrated. However, this method is effective for the bean seeds.

The effect of waxy jadeite is more obvious, because the internal structure of these two jadeites is relatively loose, and water molecules are often easier to enter the jadeite jadeite, so as to replenish water and make the jadeite look moist and moving. However, for jadeite with delicate texture and dense structure, such as ice jadeite and glass jadeite.

It is difficult for water molecules to enter the jadeite, so soaking in water does not have much effect.

4. To replenish water to the jadeite by soaking in water, it does not need to be soaked in water for a long time, as long as it is not worn, it is enough to soak it for one to two hours, and then take it out and wipe it clean with a dry soft cloth.

5. Jadeite soaking water is generally soaked before cleaning jadeite. Before cleaning, soak the jadeite in clean water for about 30 minutes, and then rinse the surface of the jadeite with a small soft brush to clean the stains on the surface of the jadeite. In this process, you must not use too much force to prevent the jadeite from being pressed and cracked, and then dry it with a clean soft cloth.

Jadeite with water blister, will be more moisturized, play a protective role, jadeite can not be dry bath for a long time.

Jadeite blisters will keep jadeite jade will not lack water, which can effectively represent the original appearance of jade's water color.

Jadeite jade, especially the finished product, due to the lack of protection of jadeite skin, natural storage will lose water, the jadeite soaked in water, can solve the problem of jadeite water loss.

It didn't work, but it looked wet at the time, and it was still the same afterward.

Soak the jadeite in water correctly, the consequences of the jadeite soaking in water are not serious, on the contrary, it also plays a good role in maintenance.

Jadeite needs to be cleaned regularly to keep it shiny and vibrant. If you don't wear it for a long time, you also need to regularly hydrate the jadeite, you can soak it in pure water for an hour or two, and then take it out and wipe it clean with a dry soft cloth. Be careful not to soak for too long.

Jadeite does not wear for a long time will indeed lead to the loss of its internal water, and eventually affect the head and the color of the jadeite, to soak the jadeite in the water to absorb water, but it is best to use pure water, do not use tap water, because the chlorine in the tap water will slowly erode the surface of the jadeite, for a long time, will make the quality of the jadeite bracelet worse.

The tap water used today is disinfected by the water plant, which contains disinfectant elements. If it is said that the jadeite bracelet is soaked in such water for a long time, it is obvious that it will have a certain impact on the jadeite. The color, condition, and even transparency of the corresponding jadeite bracelet will change, and there is a saying that "jadeite soaking in water has serious consequences".

There is mountain spring water. Soaking, that is naturally the best, will not affect the jadeite, but also fully ensure the head of the jade bracelet, is a good choice, no mountain spring water can choose pure water.

The color and condition of the jadeite bracelet and even the transparency can change.

Whether you wear it for a long time or infrequently, you should wash it regularly. Just wash it with clean water and wipe it clean with a towel with good water absorption. Or put it in a cool, dry place to dry.

But it's best not to soak it in hot water for a long time, even if it's just about 37 degrees, it's not a good choice. Hot water can burn the natural composition of the jade bracelet, affecting its luster and moisture.

Jadeite can be soaked in water, so can you wear it in the bath?

What will be the effect of jadeite blistering?

Kiss, jadeite soaked in water has the benefits of keeping clean, increasing translucency, and replenishing moisture. As jade, jadeite is a mixture of a variety of minerals, and there are gaps in its joints, and soaking in water can make water molecules enter the inside of jadeite, so as to keep the water moisturized of jadeite, increase the transparency of jadeite, and replenish water. <>

Generally speaking, jadeite is afraid of high temperature exposure, and boiling water may cause the swelling and cracking of jadeite, which has a great impact on the quality of jadeite. Therefore, it is generally not recommended to wear jadeite when washing and sweating.

If the jadeite is released into the water for a long time, it will irreversibly change its jade quality. The volume of its internal molecules increases, which affects the change of jade quality, resulting in the loss of water from jadeite, and the germplasm will dry out, and even its color will become lighter.

Do not soak in tap water. Because the chlorine in the tap water will gradually corrode the surface of the jadeite bracelet, soaking for a long time will make the quality of the jadeite deteriorate, affecting the wearing effect of the blue type, so it is best to choose the best bottled pure water on the market to soak the jadeite.

<>1. Jadeite can be soaked in water, jadeite needs a moist environment to keep it moist and luster, water-deficient jadeite will look dry and glossy, soak jadeite in water can keep it beautiful and valuable.

2. Jadeite is a mixture of a variety of minerals, there are certain gaps inside, soaking jadeite with water can allow water molecules to enter the inside, making the surface more delicate and moist. Therefore, when maintaining jadeite, in addition to daily cleaning, you can also soak in water.

3. In addition, when soaking jadeite with water, we must pay attention to avoid using tap water, which contains chemicals, which will corrode the surface of jadeite, make it dull in color, and affect the aesthetics.

Jadeite should be soaked in water, of course, jadeite with what water to soak its argument Changshi did not pay too much attention, Qikai can be soaked in cold water. Just don't soak for too long, usually one to two hours.

Jadeite bracelets can be soaked in mineral water or purified water. Under normal circumstances, the jadeite is soaked in water for an hour or two, and it can be wiped clean with a dry soft cloth.

Jadeite can generally be soaked in pure water, soak the jadeite in water, add a little salt to it, put it for a week, take it out, wipe it clean and put it away. Regular soaking of jadeite can make jadeite more shiny. However, hot water can not be used, and soaking in water not only does not deform but can also be maintained.

Jadeite can not be soaked in water for a long time, because the jadeite contains more pores inside, if the jadeite is soaked in water for a long time, it will easily cause the dirt or impurities on the surface of the jadeite to penetrate into the inside, which will affect the original color of the jadeite, resulting in the deterioration of the jadeite.