What should I do if I put too much laundry detergent in a Beverly drum washing machine and the door

You can directly set a separate rinse function, let the washing machine rinse a few more times, and let the foam disappear directly.

Some laundry detergents are too rich in foam, which will cause the washing machine to detect that the water in it is not drained clean, so the door of the washing machine cannot be opened.

Washing machine, laundry detergent put too much, the door can not be opened can drain the water inside, full can be opened normally, because this laundry detergent in the washing clothes, there may be a lot of foam, after the water is put away, the door can be automatically opened.

In a drum washing machine like this, if you put too much laundry detergent and the door can't be opened, you need to rinse it several times so that the clothes can be rinsed clean and the door can be opened.

The washing machine door can't be opened, and your laundry detergent is too much, it doesn't seem to have so much to do with it, now it's after finishing the bathing work, you wait for it to close and wait for a few minutes to gently tap the doorknob, relying on the vibration to let him open the door.

You can force the drum washer to shut down by pressing and holding the power button on it, and then the door can be opened. The drum washing machine does not need to put too much laundry detergent in washing clothes.

Most of the washing machine doors cannot be opened due to damaged components, at this time, the power should be kept off, knock on the door cover with your hands, and the handle position relies on vibration to make the plastic need to be reset to open, and then report for repair.

Hello, under normal circumstances, the drum washing machine can not open the door, you have to press and hold the switch for a longer time before the door opens, it is difficult to open the door casually, you have to hold it down, the door will open for a long time, if you really can't open it, you have to find a repair person to help you open the door of the washing machine.

Even if the door can be opened, you can't get the laundry detergent out because it's already mixed with the water.

If you want to open the door, you can turn off the washing machine and wait for 5 minutes.

In addition, you can do this way, and you can rinse the clothes again after washing.

Solutions and steps for washing machine doors that can't be opened:

1. Drain the water in the washing machine first, then pat the position of the lid handle of the washing machine, and rely on the vibration of the washing machine to reset the plastic pin in the washing machine to open the door.

If you encounter this situation, you should think of how to open the door, you can open it directly through the principle of vibration at the door.

After putting too much Beverly drum laundry detergent, the door won't open, what's going on, it may be that the door hasn't opened yet, and it should open after a while.

You can wash it again and try again to see if it can be opened.

Too much laundry detergent. After the water is filled, the door will definitely not open. Just wash it and wash it.

If the washing machine leaks, you should first determine the leakage location, and then take corresponding measures.

1) If you look at the front of the washing machine, if there is a leak on the right side of the washing machine, it is the drain pipe and drain pump.

The connection is not firmly connected or the rubber connection pipe between the drain pump and the filter has sand holes, tears or poor connections. The connecting ring of each connection part should be carefully checked, if there is a place where the connection is not firm, it should be reconnected, and the screws at the sealing place should be tightened.

2) The leakage of the right front of the washing machine may be caused by the corrugation of the filter or the sand holes, cracks and poor connection of each connecting pipe. For the former, the filter or bellows should be replaced. When replacing the new bellows, the metal pressing plate should be put on one end of the bellows elbow.

Then buckle the metal pressing plate on the outer cylinder and glue it firmly, and the other end is connected with the drain filter joint and clamped with a steel wire snap ring. For the latter, the wire snap ring should be re-tightened and the filter should be tightened.

3) The middle of the washing machine is leaking in the front, which is due to the fact that the water cylinder body and the front cover of the water cylinder are not fastened properly. That is, the screws of the outer cylinder fastening ring are loose, or the metal pressing plate connected by the rubber bellows is not firmly fastened with the water cylinder, or the outer cylinder weld is not firmly welded, or the outer cylinder sealing ring is cracked. When repairing, the overall hoisting structure of the outer cylinder should be proposed.

to do it later. If the outer cylinder buckle ring is loose, the front weight should be removed, the outer cylinder should be re-fastened, and the screws of the snap ring should be fastened. And in the process of tightening the buckle ring bolts, use a wooden hammer to strike the fastening ring perimeter.

When pressing and fastening the ring, the opening of the bolt should be at the convex mark "" of the front cover.

If the seal is leaking, the seal should be replaced. If the metal pressing plate connected by the rubber bellows is loose, the hexagon wrench should be used to tighten the pressing plate screws diagonally to tighten the metal pressing plate and the water cylinder.