-
I don't know how many there were, but I knew someone was right.
-
Nowadays, most passwords are invisible, except for a few people who have finger memory such as playing the piano, who else knows which one of them is wrong? What's more, many of them are now password mistakes 3 times, what should happen, even if you remember that it seems to be ** wrong, you don't dare to change only that one, what if you make a mistake? If you change it to a mistake ten times, it is estimated that the number of people who change the password instead of deleting the re-entry will increase to more than 2 times; If the password is changed to the one shown, it is estimated that it will increase even more.
In addition, there is another situation, that is, the number of bits of the password is generally less than 12 digits, a string of passwords has formed a habit, rather than checking ** wrong, it is far better to delete all and re-enter it quickly, and you don't need to look at it, don't think much. If it's an unfamiliar password or more than 25 digits, and the password can be displayed, I guess most people will change it instead of deleting it all and re-entering it.
So your question, how many people re-enter it depends on the situation. If you can't see the password, most people will re-enter it (there is a limit of 3 errors, and more people will re-enter it); If you can see the password but the password is familiar and short, more than half of the people will re-enter it; If you can see the password and the password is unfamiliar or has a lot of digits, most people will change it instead of deleting it all and re-entering it.
-
Personal habit problem, and the password is generally ciphertext, I don't know how many mistakes I entered when I lose, rather than making mistakes many times, it is better to re-enter it at one time, and the password is used to it, there will be a phenomenon that makes you say what the password is, you don't know, but you will lose it when you put it on the keyboard, this is the so-called realm, so you have to re-enter it if you are wrong.
-
Because I don't know what I fought.
-
Because they are afraid that many of them will be wrong.
-
He couldn't remember where he had got.
-
Because most people are more familiar with their passwords, they lose faster, and the keys in their hands are basically conditioned reflexes without thinking through the cerebral cortex, so after entering the wrong one, the cerebral cortex does not know what is wrong, and it is impossible to give the correct instructions to delete everywhere and continue to enter it is correct, so it is all deleted.
-
I don't have that kind of mentality, it's actually that I'm afraid that I'll make mistakes in the past, and then I'll completely delete it all and lose again.
-
Sako? Lose on the Shenma stuff?
-
Just inject it and you're good to go.
-
After erasing, the person's ID is still required.
-
Delete the user you are currently using and recreate one, maybe you created the wrong settings.
Open"Get started"→"Run", in"Run"field"rundll32 ,usersrundll"command (note case sensitive), open the user account window, remove"To use the machine, the user must enter a username and password"Checkmark in the checkbox.
Then point"Apply button"In the new window, enter the account name and password you want to automatically log in to the system, and finally click OK!
This will automatically log you in the next time you log in. To select a different account, just press at startup"shift"key on it.
How to set a user password in the system: Start Control Panel User Accounts Select your account Create a password Enter the password twice Press the "Create Password" button. If you want to cancel your password, just press enter when you are asked to enter a new password in step 2.
-
By default, it is automatically unlocked after 30 minutes!
If you've set it up yourself, it depends on how long you've set the lock time!
-
Unplug the battery board, open the lid containing the memory module, unplug the memory module and install it again, and reboot the system should be OK
-
To clear the data on your phone, go to:
1.Clear the data of a certain software, go to Settings - Application Manager - All - A certain software - Clear data (please back up important data such as ** and ** in the software in advance to avoid data loss).
2.If you need to delete the content of My Files on your phone, it is recommended to: Standby - Applications - My Files - Select the folder you need - Open - Find the content you need to delete - Press and hold the content - Delete (some system folders do not support deletion).
3.If you want to erase all data from your phone in one click, back up your important data, contacts, **, notes, etc. Settings - Reset (Account - Reset) - Factory Reset (Some phones are set up by: Settings - Privacy - Factory Reset).
Note: If you have a lock screen password set on your phone, you may need to enter it when you reset your factory settings.
-
If you forget the password of the screen lock, it is recommended to enter the wrong password five times in a row on the lock screen, click Forgot password, and retrieve the password through the password question set before.
-
What should I do if I set the delete key as part of the password when I set the password to turn on my computer, but I can't enter the delete key when I enter the password when I turn on the computer? You can reinstall the operating system and you're good to go.
-
It seems that this kind of deletion key cannot be set, right? If you press the delete key when entering the password, it will only reduce the number of digits, you can try to remove the first digit of the delete key according to your normal password.
-
It is impossible to set the delete key as a password, and it is impossible to have a delete key when the code is in the car. When the system does not start, there must be no delete key.
-
If the number of pieces that cannot be part of the password is not part of your single exit, you must have deleted one bit, and you will delete the deleted ones in order.
-
You can only shut down and restart, or you will find a professional to answer!
-
Write a program that executes when opening a file in VBA, enter the error twice, and then delete the content and save it.
-
First create a word document, use the form protection method to protect the document, tool - > protect document - >check" only allow this kind of "in the document" - >choose "fill in form", at this time a password box will pop up, enter the password 2 times (I choose 123 as the word file password here), in this way, the document has been protected.
Then let's crack it, open the word document we just created, file ->Save as-> select the HTML format, save it as an HTML document, open the html file with Notepad, search"", you'll see the words 5bcecf7a (if your password is 123).
Then we use UltraEdit or other similar tools to open the originally protected word document, search for 7acfce5b, and after searching, replace it with 8 zeros, save it.
At this time, the password of the word document is emptied, and you can cancel the document protection by yourself, and the password does not need to be entered, and press enter.
MS has not provided a patch for this vulnerability, and I think it may not be possible to solve this problem in the short term, so it is recommended that future documents not be protected with this thing.
By the way, I will introduce how to set limits:
For example, in a document, there are two parts: title and content, e.g. name We want users to fill in the content of the name without allowing them to change the "name" title, then insert the content part into the "text content control".
Method: Word2010"Development tools"--"controls"--"Rich text content controls"or"Plain text content controls"
And then"Development tools"--"Protection"--"Restrictions"In the pop-up window, set it as follows:
Note: Be sure to select "Fill in form", otherwise the content will not be available to the user.
Finally click on the button"Yes, enable mandatory protection"to set a password.
-
Go directly to Settings, Apps, clear cache, and clear all data from Sogou.
Make an appointment: Don't say "oh" again, okay? I don't really know how to reply to you when you say the word "oh", you know? >>>More
To wander is to leave, to leave everything we don't want to face >>>More
A company in China ranged from 130 to 180 people.
"There are as few as 80 people in a class as few as as 80 and as many as nearly 100. In order to let the students in every corner hear the teacher's voice, the teacher's voice must be hoarse at the end of every class. Due to the significantly low classroom occupancy per student, the desks are closer to the blackboard, and over time, students' eyesight and learning ability will decline. >>>More
Liking someone is voluntary, and how much you give is also something you can control. Everyone likes others to a different extent, so the results of what they pay and get are definitely different. Not all likes can be favored by the other person. >>>More