What s the matter with the drum washing machine not getting water

If the power supply of the drum washing machine fails, it will prevent the washing machine from starting the water inlet program. If the power supply is normal, check whether the front cover indicator light of the washing machine is on. If it's on, close the front cover.

In addition, if the inlet pipe of the washing machine is clogged with foreign objects, it will not be possible to enter the water. Supplementary information: maintenance method of drum washing machine 1.

Before washing clothes, remove all the hard objects in the clothes, because these items will damage the inside of the washing machine under the action of the water flow, and if they get stuck on the wave wheel, the washing machine will not be able to turn. Second, clothes made of different materials should be washed in different ways. Thirdly, the temperature of the water for washing clothes should not be too high, because there are plastic parts inside the washing machine, and these plastic parts will deform at high temperatures.

Fourth, don't put too many clothes together in the washing machine at a time. Too much clothing can overload the motor of the washing machine.

The drum washing machine has a small wear rate, not only washing and dehydration functions, but also disinfection and drying functions, so more and more families are beginning to buy drum washing machines. And the washing machine does not enter the water problem, what happens to the drum washing machine does not enter the water? Let's find out!

What's the matter with the drum washing machine not getting water

1. It may be that the power supply is not plugged in, which causes the washing machine to not operate normally, so the drum washing machine does not enter the water. 2. When the door lock indicator light of the washing machine is not on, it means that the door of the washing machine is not closed properly, and the washing machine does not enter the water in this case. 3. If the stain blocks the filter screen of the washing machine's water inlet valve, it will also cause the drum washing machine to not enter the water.

What to pay attention to when using a washing machine

1. Laundry handling.

Before washing clothes, clean the pockets of clothes or coins, if there are buttons on the clothes, so as to avoid these metal objects from damaging the inner barrel of the washing machine.

2. The amount of clothing.

There is a limit to the capacity of the washing machine, so you can't put too much laundry, if you wash too many clothes, the drum speed of the washing machine will slow down, which is not conducive to cleaning the clothes, and it is easy to damage the washing machine.

3. Water temperature. When washing clothes, there are requirements for water temperature, the water temperature is generally about 40 degrees, not more than 60 degrees, otherwise it will burn the laundry bucket and also cause plastic deformation.

4. Prevent dyeing.

If a lot of clothes are mixed and washed, pay attention to the dyeing between the clothes, especially white clothes are easy to be dyed, so white clothes should be washed separately, preferably by hand, so that they will not be dyed.

5. Dry the inner bucket.

After each use of the washing machine, do not close the washing machine door immediately, it is best to ventilate and dry the water first, or use a dry cloth to dry the water droplets inside, so as to avoid moisture and bacteria in the washing machine.

I summarize: The content of what happens when the drum washing machine does not enter the water is briefly introduced here, I hope it will be helpful to everyone! There are many reasons why the washing machine does not get water, so when this happens, it is necessary to find out the cause first before it can be better handled.

Hello, the reasons why the drum washing machine does not enter the water after pressing the start: 1) Turn on the faucet and make sure the water pressure is normal; 2) The machine is placed on the balcony, and it is easy to freeze the pipe in winter, resulting in no water, and try again after waiting for thawing; 3) Make sure that the inlet pipe is not bent; 4) Avoid the blockage of the inlet valve, please clean the inlet valve regularly; 5) Whether the reservation function is selected and the water does not enter, and the water will be automatically entered or the reservation will be cancelled after the reservation time is over; 6) If you don't press the start button to start, please make sure to operate it correctly; 7) Drum washing machine, choose cotton and linen and strong washing, no water will enter after the machine starts, and it will be idling for 2-5 minutes, which is normal, at this time, it is weighing, testing the weight of the clothes, and judging how much water is in.

Questions. How to clean the inlet valve.

Use a screwdriver to unscrew the back plate fixing screws on the back of the washing machine. Remove the back plate, pay attention to the buckle, remove the back plate, and you can see the drain valve inside. Remove the connecting wire of the retractor. Turn the drain valve bonnet counterclockwise. Remove the drain valve cover and you can see the foreign object inside.

The first thing to look at is whether the power is on, turned on and working properly, if the washing machine has not started working, of course there will be no water. If the door lock indicator light is not on, then check whether the washing machine door has been closed, if it is not closed properly, open it again and close it again, and the problem of no water will be solved. If the washing machine door has been closed, press the door handle lock again, and the door lock light will only turn on, indicating that the problem is in the micro delay.

It is necessary to reinstall the micro-delay and adjust the position of the door lock. Sometimes it is because there is dirt blocking the filter of the washing machine's water inlet valve that the water cannot enter, so you just need to remove the filter and clean it before reinstalling it. Open the upper cover, check whether the inlet valve coil is intact, use a multimeter to measure whether its resistance value is normal, if the measured value is infinite, it means that the inlet valve coil is burned out and does not enter the water, just replace the new inlet valve.

The working reasons why the drum washing machine does not enter the water are as follows:

1. The power supply of the water inlet solenoid valve is abnormal;

2. The control line of the water inlet solenoid valve is broken;

3. The water inlet solenoid valve is damaged;

4. The water level controller is faulty;

5. The program controller is not working properly.

There are several possibilities for the drum washing machine not to enter the water, the water inlet valve coil is broken, the wiring is loose and the solenoid valve cannot be opened, the control panel of the washing machine is faulty (including the power failure), and the level gauge of the washing machine is faulty (it has been at a high level), which will cause no water ingress.

There are many possibilities: the inlet solenoid valve is broken, or the inlet is dirty, or the water valve is not open, or the computer board is faulty. Therefore, it is necessary to troubleshoot step by step to better know the situation and troubleshoot.

After shutting down and restarting, it still can't operate normally, generally because the water inlet valve or main control board is broken and can't run normally according to the program. It is recommended to contact the after-sales service, or ask the professional maintenance personnel of this brand to check and repair. FYI.

The drum washing machine doesn't get water, what's going on? It may be that you are not operating properly, or please ask the after-sales service to help you take a look.

The reasons are: 1. The laundry detergent is used too much, and the foam cannot flow out in time, resulting in no water ingress. 2. The drainage pipe or water inlet pipe is blocked, which will also cause the washing machine to not enter the water.

3. After turning on the washing machine, the key cannot be reset, which may be a problem with the internal circuit, which will cause the washing machine not to enter the water. Suggested treatment: 1. When washing clothes, if the laundry detergent is used too much, the foam can not be cleaned, you can open it and then flush it with water separately and then discharge the foam.

2. If the drain pipe and water inlet pipe of the washing machine are blocked, in this case, disconnect the power cord first, and then remove both pipes, and then check whether the blocked items are easy to clean up. 3. If the switch button of the washing machine cannot be reset, it will also lead to no water inlet in this case, this needs to be disconnected from the power supply, and then the washing machine is disassembled to see if there is a problem with the line.

It may be external and internal to the machine.

The reasons for the failure of the washing machine are as follows:

1. For external reasons, there may be no water in the external water supply device, or it is not connected. Because there is no water supply, the drum washing machine does not get water. Check if the water supply is damaged.

2. Inside the machine, the water supply pipe of the washing machine may be blocked or leaking, and water cannot enter. Because it is blocked, the drum washing machine does not get water. Check which part is blocked for easy unclogging.

The solution to the problem of washing machine not getting water is as follows:

If it is cause 1, then the water supply can be reconfirmed after the water supply is normal;

If it is cause 2, please take it to a repair point and check the repair.

1. It may be that the power supply is not connected and the boot is not operating normally. 2. It may be that the door of the washing machine is not closed properly. 3. It may be that the door of the washing machine has been closed, and then press the door handle lock, and the door lock light will be on, indicating that the problem is in the micro delay.

4. Sometimes it may be because something dirt has blocked the filter screen of the washing machine's water inlet valve. 5. It may be that the upper cover is opened and the inlet valve coil is not in good condition.

Suggested Solution:

1. First of all, check whether it is connected to the power, turned on and operating normally, if the washing machine has not started to work, it will definitely not enter the water.

2. If the door lock indicator light is not on, you need to check whether the washing machine door has been closed.

3. If the washing machine door has been closed, press the door handle lock again, and wait for the door lock light to turn on, then the problem may be in the micro delay. It is necessary to reinstall the door slightly and adjust the position of the door lock.

4. Sometimes it is because there is dirt blocking the filter screen of the washing machine's water inlet valve, which leads to the inability to enter the water.

5. Open the upper cover first, check whether the inlet valve coil is in good condition, and use a multimeter to measure whether its resistance value is normal.

First of all, it is necessary to see if the power is turned on, turned on and working normally; If the door lock indicator light is not on, then check whether the washing machine door is closed; If the washing machine door has been closed, press the door handle lock again, and the door lock light will only turn on, indicating that the problem is in the micro delay. It is necessary to reinstall the micro-delay and adjust the position of the door lock. If there is dirt blocking the filter of the washing machine's water inlet valve and causing water to be unable to enter, you only need to remove the filter and clean it before reinstalling it.

The drum washing machine does not get water, see if the faucet is blocked.

Reason 3: The filter screen of the drum washing machine will also rot if it is blocked, so we can clean the filter of the washing machine regularly.