The correct way to wash in a front loading washing machine

Updated on home 2024-07-11
13 answers
  1. Anonymous users2024-02-12

    The method of cleaning the dirty things in the drum washing machine is as follows: 1. Clean the laundry bucket with a special detergent for the washing machine to fill the laundry bucket with clean water to the highest water level, then pour the detergent into the laundry bucket, run for five minutes to fully dissolve the detergent, if the washing machine can be heated, it can be heated to 40 degrees, then turn off the power of the washing machine, soak for about an hour, and then clean it according to the daily washing mode, when the washing machine stops, a large number of dirt fragments will float on the water surface. 2. Use drifting agent to clean the washing machine Add an appropriate amount of chlorine-containing bleach to the washing machine, then fill the washing machine with water, stir it evenly after the water is filled, and the dirt can be thoroughly cleaned after 20 minutes.

    3. Use household white vinegar to clean the washing machine, first fill the washing machine with more than half of the water, then do not put any washing items, let it soak for more than three hours, then start the washing machine switch to rinse several times, then put half of the water, and finally pour the white vinegar into the washing machine barrel, put the water away after leaving it for one night, and then wash it with clean water again, and then open the lid of the washing machine and let it dry naturally.

    Precautions for the use of drum washing machine: 1. When the "washing" or "rinsing" program is selected, the wave wheel will not run until the selected water level. 2. During the dehydration procedure, the cover must be closed, and the cover should not be opened from time to time.

    3. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger. 4. Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents. 5. When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem is not solved after 2 corrections, it will stop and alarm, at this time, the cover should be opened, the clothes that are squeezed on the side should be placed evenly, and then the cover should be closed, and the "start pause" button can be pressed.

  2. Anonymous users2024-02-11

    There are many ways to clean the drum washing machine, you can use an appropriate amount of salt and half a bottle of vinegar, and you can directly turn on the machine and clean it once a month.

    If the washing machine is dirty, you can wash it more than once for the first time, and this method can also remove odors. You can also use hot water to clean, but pay attention to control the water temperature below 50, hot water can not splash on the wet control board, the wet control board will burn the internal electrical devices after wetting, the gain outweighs the loss.

    We can go to the supermarket to buy a bottle of hydrogen peroxide and put it in the washing machine, then put in clean water and laundry detergent to mix with each other, let the washing machine turn, wait until the foam stops, and then soak for a period of time to sterilize, disinfect, and then clean. Open the water valve again, return the drain pipe to its original position, re-operate the laundry program to make the washing machine work again, clean the washing machine with clean water, and then clean the filter with clean water.

    How to clean the drum washing machine:

    1. Pull out the washing machine box, dilute the washing machine cleaner with warm water (a small amount is OK) and brush it with a brush, and the inner wall of the drawer box can also be brushed with a toothbrush dipped in the cleaning agent.

    2. Clean the sealing ring of the washing machine, the sealing ring of the washing machine will generally be easy to corrode after half a year, such as it will look dirty or mildewy but can not be wiped off, so the best way is to be diligent, and wipe the inner groove of the rubber ring with a dry towel every time you wash the clothes.

    3. If there are already corroded mildew spots on the rubber ring, you can wipe the mold spots of the rubber ring clean and keep them dry, evenly apply the mold remover to the mold spots, and need to be soaked for 5-12 hours according to the degree of dirtiness to choose the length of time.

    4. To clean the inner cylinder of the washing machine, first dissolve the cleaning agent with warm water according to the instructions, and then pour it directly into the inner cylinder of the washing machine, remember not to pour the laundry detergent to add the box, because this cleaning agent has a certain corrosion on the plastic, then adjust the water level to the highest, cut off the power supply and soak for about 2 hours, and then turn on the machine to let the washing machine run according to the normal cleaning procedure.

    5. Clean the drainage of the washing machine, this is to be operated when the washing machine stops working, first open the decorative cover at the bottom right of the washing machine, you can see a lot of dirt in the filter screen, pull out the filter screen and use a brush to clean it, the inner wall of the drainage pump should also be cleaned, the dirt will enter the inner cylinder of the cleaning machine again, and it is generally best to clean it once a month.

    6. Finally, let's talk about the disassembly and cleaning of the washing machine, disassembling the drum of the washing machine for cleaning is a very technical job, and the cleaning effect is very powerful, but you need to find a professional disassembly and cleaning company or brand after-sales, and the washing machine during the warranty period is not recommended to be disassembled and cleaned.

  3. Anonymous users2024-02-10

    <> Here's the right way to wash your front-loading washing machine:

    Have a cleaning agent ready: You can use a specialized washing machine cleaner, or you can use a detergent such as white vinegar or bleach.

    Cleaning the door glass and rubber seal: Use a damp cloth or sponge to clean the door glass and rubber seal, which can be cleaned with a small amount of detergent.

    Cleaning drum: Pour the cleaning agent into the washing machine, select the cleaning program with the longest time and highest temperature, and run the entire program. Detergents remove dirt and bacteria and keep your washing machine clean and hygienic.

    Cleaning the filter: Find the filter at the bottom of the washing machine and remove it for cleaning. Rinse with clean water, you can use a brush to remove stubborn dirt. After cleaning, reinstall the strainer.

    Wash the washing machine housing: Use a damp cloth or sponge to clean the washing machine housing, which can be cleaned with a small amount of detergent. Be careful not to spill the cleaner onto the control panel or sink.

    It should be noted that when cleaning the drum, you should avoid using too much detergent, because too much detergent may remain inside the washing machine and affect the cleaning and hygiene of the washing machine. In addition, if your washing machine has not been cleaned for a long time, it is recommended to do it regularly to keep the washing machine clean and hygienic.

  4. Anonymous users2024-02-09

    Very simple way to clean the washing machine

  5. Anonymous users2024-02-08

    Teach you the whole strategy of washing machine cleaning in one minute, don't disassemble or spend money, and give your washing machine a full body spa

  6. Anonymous users2024-02-07

    Nowadays, washing machines are mainly divided into drum washing machines and wave wheel washing machines, wave wheel washing machines do not forget to clean the filter box regularly, how to clean the drum washing machine without a filter box?

  7. Anonymous users2024-02-06

    The steps to clean and disinfect the washing machine are as follows:

    1. Use 1:99 disinfectant water and add it to the high-end position of the washing machine. Then soak for 3 hours, then wash again according to the normal washing mode (wash-rinse-dehydration).

    2. Inject warm water at a temperature of 45 degrees Celsius to wash and filter when passing the water for the second time.

    3. Wipe out the filter screen for cleaning.

    4. After cleaning with disinfectant water, filter it with clean water again.

  8. Anonymous users2024-02-05

    You can take a look at the instructions on how to clean this, which is usually written.

  9. Anonymous users2024-02-04

    First, there will be a sealing ring at the mouth of the warehouse of the drum washing machine, which is the easiest to hide dirt and dirt, this sealing ring does not need to be removed for cleaning, we use alkali laundry detergent, dilute it with water, soak the rag, wipe it several times, and then rinse it with water.

    How do you clean a front-loading washing machine? You don't need to hire someone to do it, follow these 4 steps and you can wash it yourself.

    Second, the inner cylinder of the washing machine is also very dirty, and the dirt on the clothes is adsorbed on its surface. First, soak the towel in white vinegar, then throw the towel into the inner drum of the washing machine, turn on the dehydration mode, and let the vinegar volatilize into the washing machine.

    The towel can also absorb stains, and then dissolve the alkali in water, pour the solution into the washing machine, turn on the cleaning mode of the environmental protection cylinder, turn it for about an hour, and then discharge the dirty water, which can have the effect of sterilization and decontamination. How do you clean a front-loading washing machine? You don't need to hire someone specifically, follow these 4 steps.

    You can wash it yourself.

    Third, the filter of the washing machine The filter of the washing machine is also a very dirty place, which is often ignored by us, it is generally in the lower right corner of the washing machine, and the filter is basically the lint and dirt of the clothes, we can not use our hands to buckle it little by little, open the filter, and throw a coin into it.

    Then turn on the cleaning mode, work for a while, all these dirt will be clumped together, and then rinse with clean water twice more to ensure that the inside is clean.

  10. Anonymous users2024-02-03

    <> Here's the right way to wash your front-loading washing machine:

    1.Prepare cleaning tools: laundry detergent or white vinegar, sponge, cleaning cloth, cleaning brush, detergent or drum washing machine cleaner.

    2.Clear the filter: First, remove the filter of the drum washing machine, usually it is located on the bottom or side of the washing machine. Remove the filter and rinse it with clean water to remove dirt and dust from it.

    3.Clean the washing machine door and seal: Use a sponge or cleaning cloth dipped in detergent or detergent and water to gently wipe the door and seal of the washing machine. If there are stubborn stains, you can use a cleaning brush to clean them.

    4.Clean the inner liner of the washing machine: Add an appropriate amount of special cleaning agent for the drum washing machine, and then select a program with high water level and high temperature to run. At the end of the run, wipe the inside of the washing machine with a dry cleaning cloth.

    5.Use white vinegar for cleaning: Pour white vinegar into the inner liner of the washing machine and run a high-water, high-temperature program. At the end of the run, wipe down the inner tank and door of the washing machine with a cleaning cloth.

    6.Regular cleaning: It is recommended to do a full cleaning of the front-loading washing machine every 3 months to keep it in top condition and prolong its lifespan.

  11. Anonymous users2024-02-02

    The correct way to wash in a front-loading washing machineTools: Haier washing machine, descaler.

    1. First of all, Yancha plugs in the power supply of the Hailun Suner drum washing machine.

    2. Then open the detergent box of the washing machine.

    3. After that, pour the descaler into the detergent box.

    4. Then close the detergent refill box of the washing machine, and then rotate the Haier drum washing machine opening button.

    5. Then on the panel, click the Start button.

    6. Finally, Haier drum washing coarse tung eggplant machine cleans the internal dirt.

  12. Anonymous users2024-02-01

    The correct cleaning method for the drum washing machine is as follows:Tools Materials: drum washing machine, baking soda, white hole Zeyou vinegar, water, brush, rag.

    1. First of all, empty the water of the drum washing machine, and then pour in an appropriate amount of baking soda and white vinegar mixed with the aqueous solution.

    2. Pour the mixture of white vinegar and baking soda into the drum washing machine and soak for more than half an hour.

    3. When soaking, you can gently press the bottom of the drum with your hand to help you clean it.

    4. After the baking soda is dry, you can start to use a brush dipped in an appropriate amount of water for cleaning.

    5. Finally, wipe it again with a clean rag.

  13. Anonymous users2024-01-31

    Introduction: The washing machine is used to wash clothes, but over the years, there will be a lot of dirt left in the washing machine, a little attention, will be found in many places will leave the residual dirt in the washing process, if not cleaned up in time, it is likely to repeatedly contaminate the washed clothes, and it is likely to damage the parts of the washing machine.

    Different'The method of washing machine cleaning may vary, here is a detailed explanation of the cleaning and maintenance methods of front-door front-loading washing machines. No, years of dirt have caused the bearing to be damaged, vigorously like a tractor, and it costs 380 yuan to change a bearing bracket!

    First of all, choose a period of time when you don't wash your clothes, generally it is better to choose it at night, because the washed solution needs to be soaked for a longer time (make full use of the effect of detergent), open the washing machine door, take a damp cloth strip, turn the sealing strip over, and wipe the dirt in the groove.

    Then, disassemble the detergent (the amount of use can refer to the instructions for using hail) and pour it into a drum with washing liquid.

    Then turn the wash mode switch to the memory setting, and the washing time is fixed at 15 minutes.

    Pay more attention here, when this program is washed to 10 minutes (there are 5 minutes left, don't overwash your head, otherwise you won't achieve the best results), turn off the main power in time and soak it overnight.

    At this time, look at the inside of the drum door is already full of foam (do not open the door).

    When I get up the next day, I can position the memory gear again, and the washing time can be positioned to about fifteen minutes, and the temperature must be adjusted to 50 degrees at this time.

    Then, tap the start switch and rinse until the program is complete.

    Finally, wait until the washing is complete, and you can observe the effect of the cleaning.

    The interval between washes can be determined depending on the level of dirt in the drum of the washing machine, usually once every six months to once a year. If the inner barrel has not been cleaned for several years, the first wash may wish to increase the intensity and measurement of cleaning.

    Notes:

    A single piece of light shirt should not be washed separately, because the drum is protected by wheels and will not dry the clothes.

    Tips:

    Small items such as socks and handkerchiefs should be washed together in a laundry net pocket as much as possible, because small items may get stuck between the sealing strip and the door crack during the washing process, resulting in the phenomenon that the drum sealing strip is torn. If you don't have a laundry pocket, you can wash small items tucked into long trouser legs.

Related questions
9 answers2024-07-11

1. Sealing ring cleaning drum washing machine will have a sealing ring at the mouth of the warehouse, which is the easiest to hide dirt and dirt. There is no need to remove the seal for cleaning. We used alkali + laundry detergent, diluted with water, soaked the rag, wiped it several times, and then rinsed it with water. >>>More

14 answers2024-07-11

<> The cleaning methods and skills of Haier automatic drum washing machine are as follows: >>>More

8 answers2024-07-11

<>Here are the steps to clean your Little Swan drum washing machine: >>>More

5 answers2024-07-11

The method of cleaning the dirty things in the drum washing machine is as follows: 1. Clean the laundry bucket with a special detergent for the washing machine to fill the laundry bucket with clean water to the highest water level, then pour the detergent into the laundry bucket, run for five minutes to fully dissolve the detergent, if the washing machine can be heated, it can be heated to 40 degrees, then turn off the power of the washing machine, soak for about an hour, and then clean it according to the daily washing mode, when the washing machine stops, a large number of dirt fragments will float on the water surface. 2. Use drifting agent to clean the washing machine Add an appropriate amount of chlorine-containing bleach to the washing machine, then fill the washing machine with water, stir it evenly after the water is filled, and the dirt can be thoroughly cleaned after 20 minutes. >>>More

4 answers2024-07-11

The method of cleaning the dirty things in the drum washing machine is as follows: 1. Clean the laundry bucket with a special detergent for the washing machine to fill the laundry bucket with clean water to the highest water level, then pour the detergent into the laundry bucket, run for five minutes to fully dissolve the detergent, if the washing machine can be heated, it can be heated to 40 degrees, then turn off the power of the washing machine, soak for about an hour, and then clean it according to the daily washing mode, when the washing machine stops, a large number of dirt fragments will float on the water surface. 2. Use drifting agent to clean the washing machine Add an appropriate amount of chlorine-containing bleach to the washing machine, then fill the washing machine with water, stir it evenly after the water is filled, and the dirt can be thoroughly cleaned after 20 minutes. >>>More