Where is the filter for our front loading washing machine

The filter is on the bottom left of the washing machine and can be found by the following methods.

Tools Required: Coins.

1. First in the drum washing machine.

A square lid can be found in the lower right corner, as shown in the image below.

2. Use a coin to insert it into the gap above the lid to open the lid, as shown in the figure below.

3. After that, pull the coin outward, and the lid can be opened, as shown in the picture below.

4. After that, you can see the filter of the washing machine, and you can take out the filter by turning the top of the filter by hand, as shown in the figure below.

5. Take out the filter screen, as shown in the figure below.

Siemens front-loading washing machines do not have a lint collector filter because the way it drains is through a drain pump that forcibly drains the water, so the lint in the water is basically drained away, so there is no need for filtration or cleaning.

Front-loading washing machine.

The filter is generally in the lower right corner of the washing machine, and there is a plastic gusset to cover it, which leaks out with a light touch of the hand. Then rotate it counterclockwise by hand to remove it, and after cleaning up the clutter inside, return to the original packaging. As shown in Fig;

There are two kinds of drum washing machine filters, one of which is located at the balance ring of the inner barrel and is shaped in a square frame. Pinch the filter slot with your fingers, then pull it up to remove it, remove the internal organs of the filter, then rinse it with water, and then reinsert it and press down against the notch. The second type of filter is located in the middle of the inner barrel, which is vertical, and you only need to press down on the plastic card slot above the filter with your thumb down and take it outward.

Note that when reloading, the upper and lower sides should not be reversed, so as not to remove the filter.

How to clean the filter of the drum washing machine.

1. Open the bezel.

There will be a baffle under the drum washing machine, if the baffle is in the shape of a strip, we can insert a slotted screwdriver into the gap between the baffle and the left side of the baffle, press the screwdriver down and pry it back, and pry it out on the left side of the baffle. Next, pry out the right side of the bezel in the same way and open the bezel strip. Some washing machines have a round or square bezel underneath, usually with a small groove above it, which can be opened by inserting a slotted screwdriver into the groove, lifting it up and moving it back.

Some washing machines have no grooves in the round bezel underneath and are usually opened by pressing.

2. Remove the filter.

Once the drum washer baffle is opened, we can see the drain valve filter, we rotate the top of the filter to the left, and take it out when the filter is loose.

3. Cleaning. After the filter is taken out, we can use a tool such as a clip to remove the lint wrapped around the filter, and then put it under the faucet, open the faucet and rinse it clean. During the cleaning process, we can also use clips or toothbrushes to clean up the residue at the drain pump, etc.

There is a small drain next to the filter to drain the remaining water in the washing machine. When you are cleaning, you can pull out the plug of the drain pipe to drain the stagnant water in the washing machine.

4. Install filters.

We insert the filter into the lauter tank and rotate it to the right to fix it, and then we turn on the washing machine for a trial run to check that the washing machine does not leak. If it won't leak, we will close the washing machine baffle.

The filters of the drum washing machine are all in the lower right corner of the machine, and you can find it by opening the lid and unscrewing the valve. The filter screen is generally made of metal or synthetic fiber, which is used for the separation of various fluid substances, and is generally corrosion-resistant, oxidation-resistant, etc.

The filter of the drum washing machine is located in the lower right corner of the machine. Open the lid, unscrew the valve, and find it. Filters are usually made of metal or synthetic fibers and are used to separate various fluid substances and are generally resistant to corrosion and oxidation.

The filter of the front-loading washing machine is located in the lower right corner of the machine, which can be found by opening the lid and unscrewing the valve. The filter screen is generally made of metal or synthetic fiber, which is used for fluid separation, general corrosion resistance, oxidation resistance, etc.

The filter of the drum washing machine is generally on the front or side of the front or side of the drum washing machine, and there is a small round lid. When you open this lid, there is a filter inside.

For various brands of drum washing machines, the position of the filter is different.

Take Haier drum washing machines as an example: there is a small window the size of a palm at the bottom right of the case, open the clip. Inside is the filter.

Open the filter of the drum washing machine: there is a small box at the bottom right of the machine, and unscrew the small hat counterclockwise. The cleaning method is as follows:

1. When cleaning, pour the amount of water used in the three kettles into an empty container with descaler, prepare it according to the ratio of descaler and water to one, and then stir evenly. Pour the mixed descaler solution from the detergent addition box, being careful not to spill on the **. Then press the power switch of the washing machine, set the program to "Washing Program" to rotate the washing tube, and after the descaling liquid is discharged from the drain pipe to the barrel, then add the discharged descaling liquid from the detergent addition box, and so on many times until the program is completed, open the filter and clean the filter screen of the washing machine.

2. After the machine is finished, open the water inlet valve and restore the drain filter to its original position. Re-select the washing program to make the washing machine run again, and when the program is finished, clean the filter again. At this point, the descaling and cleaning are complete.

However, due to the action of the descaling liquid, the surface of the filter cylinder of the washing machine will be slightly dark and black, but it will not affect the normal use, and the clothes can be restored to their original state after washing the clothes a few times.

3. If the filter is above the inner barrel of the washing machine, pinch the filter slot by hand, pull it up to remove it, take out the wire chips in the washing machine filter, and then rinse the washing machine filter with water.

4. If the filter is in the middle of the inner barrel of the washing machine, press and hold the plastic press groove above the filter with your thumb, press down hard, and then take it out, take out the line chips, and rinse the filter screen of the washing machine with water.

Siemens washing machine filtration network is divided into two bends: one is set at the balance ring of the inner barrel (that is, above the inner side of the inner barrel), and the shape is a square frame (i.e., the water channel filtration type), and the other is set in the middle of the inner barrel, and the shape is vertical (i.e., left and right swing type).