Is the drum washing machine suitable for disassembly and cleaning?

How to disassemble and clean the washing machine.

1. Disassemble and clean the washing machine, which is suitable for the washing machine.

Thanks to the drum washing machine.

The internal structure is complex and does not use this method.

2. Before disassembling and cleaning the washing machine, you need to turn off the power of the washing machine and prepare different types of screwdrivers.

3. Open the upper cover of the washing machine, and then remove the screws connecting to the upper cover, then you can lift the upper cover of the washing machine and take it off.

4. Then choose a suitable screwdriver and remove the screws of the washing machine, so that the stainless steel liner of the washing machine can be successfully removed.

5. Use a brush and detergent to thoroughly clean the inside of the washing machine, this inside is the dirtiest, covering all kinds of hair, dander and dirt of the clothes, which needs to be carefully cleaned, and finally rinsed with clean water.

6. Then clean the stainless steel barrel of the washing machine, comprehensively clean the inside of the stainless steel surface, and then put the cleaned stainless steel barrel back in place, and the screws are good.

7. Finally, install the lid of the washing machine back, and screw the original screws back in the same way as the removal steps.

3. Baking soda.

White vinegar to clean the washing machine.

Nowadays, people generally use fully automatic washing machines, such as wave wheel washing machines, which have two buckets inside and outside, and when the washing machine is running, the water will flow between the two buckets, so there is a lot of dirt between the two buckets. Using baking soda and white vinegar to clean the washing machine works very well, and here's how to do it:

1. Pour about 200ml of white vinegar into the basin, and then put a towel in it to moisten.

2. Put the towel in the washing machine and turn on the "dehydration" mode to spin dry. The purpose of this process is to allow the white vinegar to reach every part of the inner drum of the washing machine, spin it off and let the washing machine sit for about 1 hour.

3. Prepare 50 grams of baking soda to dissolve in water, pour in laundry detergent, and then adjust the water level of the washing machine to the "highest water level" and turn on the washing mode.

It usually lasts for 10 minutes, and then rests for about 2 hours.

4. After draining the water in the washing machine, clean the filter screen, and rinse the barrel for 2 more times, and the whole cleaning process is over.

Three minutes to teach you to disassemble the drum washing machine, cleaning is necessary, and you will know that it is very simple at a glance.

How to disassemble and clean the drum in the drum washing machine

Open the lid of the washing machine and unscrew the screws on the bottom of the inner cylinder. Once the screws are unscrewed, pick up the lifted blade with both hands and lift it up to remove it, use a screwdriver to unscrew the four screws and place them in the designated position for easy finding when installing, and then begin to remove the cover.

There is one screw on the outside of the washing machine on the left and right, open the case and tighten the screws, and there are two screws on the back, which are also unscrewed. Once you have unscrewed the 4 screws on the outside of the upper cover, you can lift the upper cover, there is a lid on the barrel, unscrew these four screws and lift them slightly upwards to remove them.

Lubrication

In order to make the washing machine run normally and easily for a long time, it is necessary to carry out correct lubrication and maintenance on time, the main places that need to be lubricated are bearings and gears, and the bearings need to be injected with L-TSA22 anti-rust and anti-oxidation lubricating oil with good wear resistance and oxidation stability through the oil injection hole, and generally refueled once a year if used for general mechanical oil.

The gears should be lubricated with No. 2 extreme pressure lithium grease with good adhesion, or zinc dialkyl dithiophosphate with good oiliness with 1% mass content, or MOS2, L-CKC100 medium extreme pressure anti-wear gear oil with 3% mass content for lubrication.

The bearings and gears of the spin dryer should be added with L-AN15 and L-AN68 lubricating oil with good oxidation, anti-rust and anti-wear properties every year or half a year. If a sealed rolling bearing is used, it should be sealed by the bearing factory with a service life of more than 1000h, polyurea-based thickened refined petroleum lubricating oil, and No. 2 grease with anti-rust and antioxidant should be added.

Contamination of the machine cell

Household automatic washing machines are generally composed of stainless steel inner cylinders and outer cylinders, and the interlayer of the inner and outer cylinders is called the washing machine tank. Studies have shown that when the washing machine is running, the water flows back and forth in the tank, and over time, a large amount of dirt can adhere to the tank.

Year after year, this large number of bacteria already exists on the inner walls of the washing machine, and as the number of washing clothes increases, so does it. Some strains may not be destroyed even by drying, especially in close-fitting underwear. So we must be wary of the washing machine on the clothes"Secondary pollution"。

Cleaning and disinfection methods

There are two common cleaning methods, one is to ask professional maintenance workers to disassemble the washing machine tank for cleaning, which is more expensive and troublesome; The other is to use a professional washing machine tank cleaner with a high sterilization rate for cleaning, which is completed in one step and is simple and effective.

Tank cleaner

There are already various brands of washing machine sink cleaners on the market, but due to the chaotic market and the uneven quality of various products, it is recommended that consumers pay attention to buying products with high sterilization rate certified by authoritative organizations.

Front-loading washing machines do not need to be taken apart for cleaning.

When cleaning, open the door of the washing machine, use a towel or sponge dipped in detergent or soapy water, and wipe the inner wall of the drum and the door frame to remove stains and odors. Most front-loading washing machines are equipped with a strainer and need to be cleaned regularly. Open the filter cover on the bottom of the washing machine, take out the filter, rinse it with clean water, remove stains and debris, and put it back in place.

The rubber seal on the inside of the drum washing machine is prone to dirt and dirt, so it needs to be cleaned regularly. Use a sponge or cloth moistened with detergent or soapy water and wipe the rubber seal to remove stains and odors. Some brands of drum washing machines can also be cleaned and cleaned, and they can be operated according to the requirements of the manual to remove stains and odors from the inside of the washing machine.

It should be noted that when cleaning the drum washing machine, it is necessary to disconnect the power supply first to avoid safety accidents. In addition, if the washing machine is faulty or needs to be repaired, it is recommended to seek professional help to avoid unnecessary losses caused by disassembly and repair by yourself.

Precautions for cleaning the washing machine

1. Regular cleaning: When using the washing machine, the interior and exterior of the washing machine should be cleaned regularly, including the washing machine barrel, filter, drain pipe and other parts, so as to avoid dirt, odor, bacteria and other problems affecting the washing effect and safety of use.

2. Clean up foreign objects: When using the washing machine, you should pay attention to avoid putting foreign objects and hard objects into the washing machine to avoid damage to the washing machine or jamming the parts of the washing machine. At the same time, it is also necessary to regularly check the inside of the washing machine for foreign substances.

3. Control the amount of detergent: When using the washing machine, the amount should be reasonably controlled according to the type, concentration, water quality and other factors of the detergent to avoid too much or too little detergent affecting the washing effect and the service life of the washing machine.

4. Safety: When using the washing machine, you should follow the product instructions and safety specifications to avoid the occurrence of dangerous accidents such as electric shock and scalding. At the same time, it is also necessary to pay attention to whether the washing machine is safe to use before the state liquid.

Can be disassembled for cleaning. However, the drum is more complex than the washing machine, and the disassembly and cleaning of the drum washing machine involves removing the cover, remembering the wiring, disassembling the upper and lower baffles and related screws, etc., the process is complex, if you are not a professional cleaning personnel, it is recommended not to disassemble the drum washing machine for cleaning, or ask a professional to clean and disassemble the machine for cleaning.

Knowledge Expansion——The washing machine does not disassemble and cleanStep 1

If the drum washing machine is not disassembled and cleaned, it is relatively simple, and the steps are suggested: stir the washing machine descaler and water according to the ratio of 1:2, put it into the detergent box of the washing machine, press the power switch of the washing machine, adjust the program to the washing program, and then put it in clean water for the second time to wash it once.

However, it should also be noted that in fact, whether it is a drum washing machine or a wave wheel washing machine, it is recommended to clean the washing machine regularly to ensure that the washing machine is clean, such as external cleaning in January and internal cleaning in March. And when it is necessary to disassemble and clean, it is best to ask a professional to clean it, and do not disassemble the machine by yourself, so as not to cause secondary damage to the washing machine in an unprofessional situation.

The clothes washed by the drum washing machine will not be entangled, which is more popular, no matter what type of washing machine it is, it must be cleaned regularly to be more clean and hygienic, but many people do not know how to clean the drum washing machineIs it necessary to disassemble and clean the drum washing machine? How much is a professional washing machine cleaned?Let's find out!

Is it necessary to disassemble and clean the drum washing machine

First of all, the front-loading washing machine can be taken apart for cleaning.

Secondly, if the drum washing machine is cleaned, the drum should be disassembled first and then washed, but we are not professionals, and it is generally not recommended to disassemble it casually, but if you really want to disassemble it, you can also disassemble and clean it.

Finally, note the following:

1. It is best not to do it casually for experienced personnel with super hands-on ability, it will only get more and more messy.

2. It is recommended to buy a drum washing machine if you can buy a drum washing machine, because the structure of the drum washing machine is too complicated.

3. Don't believe the various ghosts of the washing machine manufacturer, the washing machine comes with cleaning, air washing and disinfection, and finally needs to be cleaned every month.

If you don't know how to remove the washing machine, you can ask a professional to disassemble and clean the washing machineHow much does it cost to professionally clean a washing machine?

Generally, different types of washing machines in different regions are different. Now the market for washing machine dismantling and washing is about 200 yuan. In some areas, the washing machine is about 160 yuan.

In some areas, the ** of dismantling and washing is about 300 yuan. Overall, the difference is not huge.

Many users will feel that it is a bit expensive to ask someone to disassemble and wash the washing machine. In fact, this ** is more suitable. Because although it is not very difficult to disassemble and wash the washing machine, it is more time-consuming. It also needs to be installed after the cleaning is completed. So 200 yuan is not expensive.

In addition, it can be cleaned in a disassembly-free way, and it is generally enough to disassemble and clean it once every 1-2 years. In this way, it looks like the ** cleaning is not very expensive.

Is it necessary to disassemble and clean the drum washing machineHow much does a professional Shanji let clean the washing machine once?

The cleaning procedure is as follows:

1. Take down the drain pipe of the washing machine and put it on an empty bucket, close the water inlet valve and the front door;

2. Pour the water of the 3 kettles into an empty container with descaler, and prepare it according to the ratio of descaler to water equal to L to 2, then Zheng and stir evenly;

3. Open the detergent addition box, pour the mixed descaler solution from the detergent addition box, and be careful not to splash on the detergent addition box;

4. Press the power switch of the washing machine, set the program to the washing program, and select the longest time to rotate the washing cylinder; After the descaling liquid is discharged from the drain pipe to the barrel, the discharged descaling liquid is added from the detergent addition box, and so on many times until the program is completed, and the filter is opened to clear the hail filter;

5. After the machine is finished, open the water inlet valve and restore the drain pipe to its original position; Re-select the washing program to make the washing machine run again, and when the program is finished, clean the filter again;

6. In 40 liters of water, add 300ml of bleach, adjust to a high water level, add bleach and stir evenly after the water is full, and when the water is finished, put water again to completely drain the dirt; Scrambled the sails.

7. When the washing machine is not in use, try to open the lid to prevent moisture from stuffing inside and causing mold.

The first step is to remove the door of the drum.

The second step is to remove the lid.

The third step is to disassemble the control board and take pictures to remember the wiring.

The fourth step is to disassemble the lower panel.

The fifth step, after disassembling the front upper panel, remove the cement blocks with the upper and lower counterweights, and then the upper and lower baffles, as well as the baffles in front.

In the sixth step, the outer barrel is two parts, and the upper and lower red circles are the screws that have removed the cement counterweight part and then removed the arrow.

Step 7: After removing the front half of the outer barrel, the inner barrel is exposed.

Step 8: Open the back panel of the washing machine.

The ninth step is to remove the belt first, then disassemble the center fixing screw, and gently tap it with a rubber hammer, and the inner barrel can be taken out.

Step 10, continue dismantling.

The eleventh step is to clean and completely restore brand new.

1. The non-hands-on ability is super strong, experienced personnel do not imitate, I began to disassemble to restore, it took nearly five hours, and the difficulty is several times that of the washing machine.

2. It is recommended to buy a washing machine with a drum wheel, the structure of the drum washing machine is too complicated, except for me, a madman and a stuffy brother, no one disassembles and cleans, including the manufacturer.

3. Don't believe in the various ghost blows of the washing machine manufacturer, my washing machine is self-cleaning, washing and disinfection with air, and cleaning with washing machine detergent every month, and the result is still like this.