How to open a Siemens front loading washing machine

Reason: The drum washing machine has a safety lock function, and the lid cannot be opened when the power is on, it may be that you can't open it when the power is on.

There is a heating element inside the drum washing machine, when the door is closed, the heating element heats up, the bimetal sheet is heated and bent, and the main power is turned on and the door lock is locked.

After some time after the power failure, the bimetal plate cools down and resets. It is possible that the heating element is damaged, and the door cannot be opened.

A malfunctioning electric door lock in a drum washing machine can also cause the washing machine door to not open.

Solution: You can pat the handle of the lid with your hand, and rely on the vibration to reset the plastic pin to open the door.

If the knob is screwed to the stop gear and the door still can't be opened for a long time, you can screw the knob to any gear again, and after a few seconds, you will hear the sound of the door lock "popping", and then the door can be opened.

There is also an emergency switch in the lower right corner of the machine, open the cover on the outside of the drain pump in the lower right corner, you will see a red plastic cable, pull down along the vertical direction of the cable, you will hear the slight sound of the door lock, and you can also open the door. It should be noted that if there is water in the bucket or the temperature is too high, the door will not be opened. It is necessary to drain the water in the bucket first, and then solve it through the above methods.

Conclusion: The general drum washing machine has an electric lock protection device, and the washing machine still belongs to the protection period for two or three minutes after the power is off, and the door lock will not be opened. So we don't rush to open the door after the washing machine stops working, just turn it on again after three or five minutes.

Siemens' household appliances are still good, but they are more expensive.

Siemens front-loading washing machine is used as follows:Necessary materials: Siemens drum washing machine CFD936, laundry detergent, clothes.

1. First connect the socket of the Siemens drum washing machine.

2. Then open the laundry detergent box of the Siemens front-loading washing machine.

3. After that, pour laundry detergent into the main sink of the laundry detergent addition box.

4. Then pour disinfectant into the disinfection tank of the laundry detergent box.

5. Then close the laundry detergent box of the Siemens front-loading washing machine.

6. Secondly, on the panel of the Siemens drum washing machine, click the "Start Adding Clothes" button.

7. Finally, the Siemens drum washing machine starts to be cleaned.

Tool Material: Siemens front-loading washing machine.

Laundry detergent and disinfectant.

1. First connect the socket of the Siemens drum washing machine.

2. Then turn on the laundry detergent in the Siemens front-loading washing machine.

Add the box. <>

3. After that, pour laundry detergent into the main sink of the laundry detergent addition box.

4. Then pour disinfectant into the disinfection tank of the laundry detergent box.

5. Then close the laundry detergent box of the Siemens front-loading washing machine.

6. Secondly, on the panel of the Siemens drum washing machine, click the "Start Adding Clothes" button.

7. Finally, the Siemens drum washing machine starts to be cleaned.

Hello, the first use of the new machine is recommended to empty wash once with a cartridge cleaning program or a high-temperature program (such as cotton fabric 90 degrees), do not put in clothes or wash products.

In just 5 steps, you can easily use the washing machine

01 Pre-prepare your clothes.

Check whether the laundry can be machine washed according to the laundry label, and then classify the laundry according to color and material. Foreign objects (coins, paper clips, etc.) may lose your clothes during washing, so please empty your pockets first.

You can find detailed information in the "User Guide" and "Preparation of Clothing".

02 Choose the right program.

Choose the appropriate washing program according to the material or type of clothing.

For more information, you can check it in the "User Guide" and "Introduction to Washing Program Functions".

03 Add detergent products.

Please choose a washing product labeled "low foam" and add the appropriate amount according to the amount of laundry and the degree of dirt.

Using laundry products that are not labeled as "low foaming" or adding too much laundry product may cause the washing machine to overflow foam or even water.

04 Close the door and press the start button.

After closing the door, please check whether there is any clothing caught in the door frame and door rubber ring, so as not to damage the clothing and door rubber ring, after the inspection is completed, press the start button, and the machine will start to run automatically.

05 End of procedure.

After the program is over, it is recommended that you clean the door glass and sealing ring, keep the door open, and ventilate for half an hour before closing the door.

Summary. Hello! Kiss.

The following are the steps to use the Siemens drum washing machine to help you summarize: 1. Insert the power plug into the socket and cover it with a waterproof cover. 2. Turn on the water pipe switch.

3. Pour the detergent into the washing box. 4. Select the washing mode according to the type of clothing. 5. Click the "Start" button, and the washing machine can start washing clothes.

Hello! Kiss. Here are the steps to use our front-loading washing machines to help you summarize:

1. Insert the power plug into the socket and cover it as if it were touching the waterproof cover. 2. Turn on the water pipe switch. 3. Pour the detergent into the washing box.

4. Select the washing mode according to the type of clothing. 5. Click the "Start" button, and the washing machine can start washing clothes. [Happy Round-up].

Related information: Siemens front-loading washing machines are of very good quality, Siemens is a German brand, founded in 1847, and belongs to the world-renowned big brands. Siemens entered China in 1872 and has more than 140 years of brand skills, especially in the field of drum washing machines.

Siemens drum washing machine is very good in terms of quality, through the data of major forums, 98% of consumers think that the quality of Siemens drum washing machine is very good, and there has been no quality problem for many years. In addition, Siemens roller washing machine belongs to the high-end grade, both in terms of quality and after-sales are excellent. <>

1. All drum washing machines have electromagnetic door locks, which cannot be opened in the case of power failure, and must be energized in the case of power on, so as to ensure that the water level is low enough not to overflow before it can be opened.

2. Once you press the drum washing machine, the stool must be completed with this program, and the door cannot be opened when the program is not completed.

3.The drum washing machine has the function of a safety lock, as long as the menu you set can be opened after two minutes after the work, if you forcibly stop the unfinished program need to open the door immediately, it is impossible to wait, if you stop for two minutes, it is estimated that there is a problem with the lock, this has to find after-sales service.

4.Some drum washing machines operate like this to open the door during the process: turn it off. Unplug it, wait 5 minutes, and plug it in. Turn on the machine and re-select the button to wash it again to see if it can be opened, if it still doesn't work, find customer service.

Hope it helps.