My balcony is covered with anti corrosive flooring, and I have brushed a few more sides of tung oil

Let me talk about it, cooked tung oil is good, should not be brushed raw, raw is mainly used in medicine and chemical industry, tung oil is to brush a side of natural air drying and then polishing, generally tung oil wiped with a cotton cloth, if the wood inside the tung oil is full of absorption is estimated not to be brushed, your tung oil to see if there is a problem, now you can only clean up the surface, as for your tung oil has doping, tell you a method: first find a clean white paper, the thinner the better, so that the effect is more obvious. Tung oil construction with a finger dipped in a little cooked tung oil, vigorously rubbed on the white paper, evenly spread, let the paper eat the tung oil, both sides of the white paper smeared, the area as wide as possible.

Place in a cool place to air dry. After it is completely dry, the white paper with cooked tung oil without adulterants is smeared, which feels softer and tougher; On the contrary, it is more brittle and easy to crack. You can also light this white paper, and after burning, if there is only the taste of tung oil, then there is no adulteration; If there are other pungent smells, please use with caution!!

The problem of color, specifically, does not fundamentally change the color (including wood products), but after using tung oil, it will appear oil-soaked color (take a piece of dry wood and soak it in water).

Haha, it doesn't hurt for everyone to stand and talk, it's not easy to clean up the undried tung oil. I'll give you a simple home remedies, go to the paint shop to buy some driers, tell the store owner about your situation, he will recommend the brand to you, dilute it after you come back, spray it all over with a sprayer, and it will dry in a few days (be careful not to spray too much). Originally, you must add a drier to brush tung oil, because the current tung oil does not have pure tung oil, it is a mixed oil, and you will be in this situation if you brush a little more, which is why people give you a lighter brush.

If you don't add a drier, you can remedy it, it will definitely be effective.

Tung oil is divided into raw and cooked, and what you buy yourself is cooked tung oil, which is an ingredient of national lacquer, so it will not dry. You should buy tung oil, and when you buy it, you better ask if it is for external use, and it should be self-drying (the kind with a wooden boat brush is best).

Shouldn't brush tung oil you should clean off brush varnish.

Shouldn't brush tung oil you should clean off brush varnish.

Hello master, I bought a small wooden boat last month, a little watery, I use tung oil to brush the inside and outside of the boat once, is it better to use cooked tung oil, or use raw tung oil?

My suggestion is to wait for it to dry naturally, if not, you think about what physical methods can be used to remove it, with a blade, and there are chemicals that I am reluctant to recommend, there are all on the Internet, tung oil should belong to the resin category, with solvents that dissolve resins, such as acetone, but it is toxic to pay attention to the use, this is my little advice, if it is incorrect, I hope to point out, everyone helps each other.

Shouldn't brush tung oil you should clean off brush varnish.

Name: Anticorrosive wood flooring material: pine sylvestris, red pine, southern pine, pineapple lattice and other thickness:

Paint: anticorrosive wood is specially used wood oil wood paint color: red, yellow, brown in different depths; Smoke gray, milky white, grass green and other properties, 1, natural wood wood is a natural material used by human beings earlier, and it is also the only renewable and naturally degradable biological resources in the world's four major materials (steel, cement, wood and plastic), which has small volume weight, high strength, vibration resistance, vibration resistance, low acoustic and thermal conductivity, good electrical insulation, impact resistance, strong durability, elasticity and toughness, beautiful color and texture, health and environmental protection, and easy processing, making it an ideal indoor and outdoor building materials and decorative materials.

However, wood and wood products that have not been treated with preservatives are susceptible to insect invasion and decay, and in wood and soil....

Shouldn't brush tung oil you should clean off brush varnish.

Shouldn't brush tung oil you should clean off brush varnish.

Shouldn't brush tung oil, you should clean it up and brush the varnish for adoption.

My suggestion is to wait for it to dry naturally, if not, you think about what physical methods can be used to remove it, with a blade, and there are chemicals that I am reluctant to recommend, there are all on the Internet, tung oil should belong to the resin category, with solvents that dissolve resins, such as acetone, but it is toxic to pay attention to the use, this is my little advice, if it is incorrect, I hope to point out, everyone helps each other.

The treatment method of the ground is: clean up the base layer of ground ash, sundries, etc., clean it with cleaning agent when there is oil stain, and rinse it with clean water in time, and brush the surface with cement slurry to complete the treatment.

Antiseptic wood ground cleaning, do not worry about the phenomenon of damp bulge after wiping with a damp cloth like ordinary wood, although it is excellent in waterproof and moisture-proof, but we still have to pay special attention to sanitation and cleaning, it is best to clean up every short period of time, the purpose is to prevent the ground from breeding bacteria to bring bad effects to everyone.

The preservative wood itself is filled with preservatives, so it has the characteristics of anti-corrosion and moth-proofing, and can be exposed to the sun for a long time. With the glass-sealed balcony, you don't have to worry about being exposed to the sun in the summer heat. Secondly, compared with balcony tiles, tiles have a cold feeling; The balcony is paved with anticorrosive wood, which makes the wood feel more comfortable and the wood feel closer to nature, with the effect of warm in winter and cool in summer.

Before laying the floor, first of all, on the balcony.

The ground is cleared for construction.

Balcony floor cleaning process:

1. Leveling: Cleaning the base layer, brushing cement slurry, finding elevation elastic line, making ash cake, punching bars, mixing 1:3 cement mortar, leveling layer construction and maintenance.

2. Polymer cement waterproof coating construction: grassroots cleaning, additional layer treatment, coating waterproof layer construction, water storage test, protective layer construction, floor tile Party A takes care of itself.

3. Clean up the base layer of ash, sundries, etc., and clean up the chisel, clean it with a cleaning agent, and rinse it with clean water in time, and brush the surface with cement slurry.

4. Find the elevation and elastic line: the control point of the elevation level, according to the design of the thickness of the screed layer is 20mm, and the screed layer epithelial line will pop up on the wall.

5. Make ash cake and punch: take the elevation control line of the leveling layer as the benchmark, according to the size of the room, according to the two-way spacing not more than 2m, and pull the line.

6. Mixing 1:3 cement mortar: a bag of cement (50kg), medium sand (, water (.

Stir according to the above mix ratio, add medium sand and water in a bag of cement. The concrete is fed in the order of cement, sand and water, and the mixing time is controlled for no less than 5 minutes.

7. Screed construction: Before the construction of the screed, water should be sprinkled and wetted, but there should be no open water and stagnant water. Brush the cement mortar on the wet base layer and lay the cement mortar with the brush. Lay from the inside to the outside, and lay a high ash cake with a thickness of 2mm.

8. After the mortar is laid, it is vibrated and compacted, scraped and calendered according to the ash cake.

9. After the construction of the leveling layer is completed, the maintenance at room temperature is 24h, and the sprinkling maintenance is not less than 7d.

10. Before the construction of the waterproof layer begins, the surface of the base layer should be cleaned, and there should be no sundries and defects, and the defects should be repaired and smoothed with 1:3 cement mortar. When the base layer is too dry, it is wet with water, and the waterproof layer can be constructed after there is no open water to prevent the base layer from being too dry and causing peeling and cracking.

11. Additional layer treatment: A layer of paint should be strengthened and a 300mm wide glass fiber mesh cloth should be attached to the weak places that are prone to water leakage, such as floor drains, pipe roots, yin and yang corners and entrances and exits. The waterproof layer of the balcony, the entrance garden, and the living balcony are 150mm high, the terrace waterproof layer is 300mm high, and the lap width is not less than 100mm.

Before construction, a layer of waterproof paint is applied, then a fiber cloth is laid, and finally a layer of waterproof paint is applied.

12. Bottom coating: evenly coated with evenly stirred paint on the base layer, which is advisable and should not be missed.

The second layer of coating: After the surface of the primer is dry, the prepared paint is applied to it with a roller brush, and the direction of the painting should be perpendicular to the first one.

13. The thickness of each application should not be too thick to prevent the curing from drying out too slowly.

Water storage test: After the waterproof layer of the coating film is dried and solidified, the water storage test should be carried out. The highest point holds 20mm of water. After 24 hours of observation, no water leakage is qualified.

Balconies should have drains.

The side of the support wood under the anticorrosive wood sticking to the ground should be reserved for water holes. (Or reserve a gutter on the balcony floor).

Directly raise a layer of antiseptic wood paving.

Do you want to install floor drains on anticorrosive boards? This is generally done by masters, but I really won't teach you, first dig out a small eye of the sewer pipe, and then make a four-corner groove when the pipe is connected. Plus glass glue to fix the floor drain, but this is just a general method, specifically, or listen to the professional decoration master.

The floor drain at home is also on the floor, and the specific operation seems to be like this, the starry floor drain is very good.

I have anti-corrosion wood flooring, do you want it?

After the antiseptic wood is installed, it is best to brush it with wood oil, so that the service life will increase; Cleaning is convenient, but it's best not to rinse with water, brush with wood oil, just use a mop, I hope it can help you.

Anticorrosive wood flooring can be washed directly with water, but it is required to maintain a certain humidity, otherwise it will crack after a long time, after all, it is a wooden thing. What you see should be the kind you usually see that is spread outdoors, the kind that is a little green in color (the ones that have been repainted are not counted), the flower stand and the outdoor grape trellis, etc. There is also a kind of antiseptic wood that is dedicated to the ground, but it should be brushed with tung oil to maintain antiseptic and moisture (this color is darker, most of them are coffee-like reddish colors).

If you brush tung oil, you can't spread it indoors, you need to separate it from the living area.

Household balconies are paved with antiseptic wood, preferably movable, and are laid separately in pieces. Your balcony is 4*, you can consider dividing it into four pieces, 1 * meter 1 piece (the block I said is the whole piece, the underground with keel, into a tic-tac-toe shape), so that you usually wash the upper layer of antiseptic wood, when it feels too dirty, lift the whole piece (like paving), and rinse the ground. After all, it's a balcony, and the small garbage above is washed down below, and it's not good to stay in it all the time.

In addition, it is best to lay cheap tiles on the cement floor of anticorrosive wood, which is conducive to moisture-proof and easy to clean. ）

In addition, there is a new type of material that can be selected, plastic wood, which is also good. You can search it online. It is easy to lay, more convenient to take care of, and it is also relatively light, and it is not suitable for cracking.