What should be paid attention to in the design and decoration of dust free workshop?

The building layout of the dust-free workshop decoration is closely related to the purification air-conditioning system, and the purification air-conditioning system should not only obey the overall layout of the building, but also conform to the principle of the purification air-conditioning system, so as to give full play to the role of relevant functions. The designer of the purifying air conditioner should not only understand the building layout to consider the layout of the system, but also put forward requirements for the building layout to make it conform to the principle of a clean room. Introduce the key points of the decoration design specification of dust-free workshop.

1. The layout of the decoration design of the dust-free workshop.

The dust-free workshop generally consists of three parts: clean area, quasi-clean area and auxiliary area.

The layout of the dust-free workshop can be in the following ways:

Outer corridor surrounding: The outer corridor can be windowed or windowless, which is used for visiting and placing some equipment, and some are equipped with on-duty heating in the outer corridor. Exterior windows must be double-sealed windows.

Inner corridor type: the dust-free workshop is located on the periphery, and the corridor is located on the inside, and the cleanliness level of this corridor is generally higher, even the same level as the dust-free workshop.

Two-end type: the clean area is located on one side, and the quasi-clean and auxiliary rooms are set on the other side.

Core type: In order to save land and shorten the pipeline, the clean area can be the core, and the space of various auxiliary rooms and hidden pipes can be surrounded by the upper and lower left and right, which avoids the impact of the outdoor climate on the clean area, reduces the energy consumption of cold and heat, and is conducive to energy saving.

2. Personal purification route.

In order to minimize the pollution caused by human activities during operation, personnel must change into clean clothes and blow shower, bathe, and disinfect before entering the clean area. These measures are called "personal purification" or "human purification". The room that changes clean clothes in the clean room should be provided with air, and the positive pressure should be maintained for other rooms such as the entrance side, and a little positive pressure should be maintained for toilets and showers, while negative pressure should be maintained for toilets and showers.

3. Material purification route.

All kinds of objects must be purified before being sent to the clean area, referred to as "material clean".

The material purification route and the human net route should be separated, if the material and personnel can only enter the dust-free workshop in the same place, they must also enter separately, and the material must be coarsely purified first.

For the occasion that the production line is not strong, an intermediate warehouse can be set up in the middle of the material route.

If the production line is very strong, the straight-through material route is adopted, and sometimes it is necessary to set up multiple purification and transfer facilities in the middle of the through-line. In terms of system design, the coarse purification and fine purification stages of the clean room will blow off a lot of raw particles, so the relative clean area should maintain negative pressure or zero pressure, and if the pollution danger is large, the negative pressure should also be maintained in the direction of the inlet.

More need to be professional.

In terms of cleaning after the decoration, I recommend paying attention to the closure measures, and the level of the interior will be detected in the future.

The decoration design of the dust-free workshop must find a professional purification engineering company, not to find home decoration and tooling to complete.

Clean engineering clean room clean workshop clean workshop decoration design is relatively comprehensive and complex, each link decoration design needs to be completed by an experienced purification engineering company, reducing the trouble in the later stage, if there is a problem in the early design, the follow-up construction problems are also continuous. Welcome to refer to it.

The so-called dust-free workshop is a sealed independent workshop, which needs to set up a sealed corridor on the periphery of the workshop, so that the clean area of the workshop has a place with excessive buffering from the outside world. The design and decoration of the dust-free workshop is very particular, and next, I will introduce to you the precautions for the design and decoration of the dust-free workshop.

1. Requirements for the design and decoration of doors and windows in the dust-free workshop.

The doors and windows of the dust-free workshop must be flat with the walls, and there is no need to design window sills. The door of the workshop must be tightly sealed, so as to prevent condensation caused by the temperature difference between indoor and outdoor. The material of doors and windows should be selected that is not easy to deform, has small error and good air tightness.

In addition, the shape of the doors and windows in the workshop should be as simple as possible, so that it is easy to clean. Doors and windows are not suitable for wood, and after a long time, it is easy to breed bacteria by moisture.

2. Dust-free workshop design and decoration ground requirements.

The design and decoration of the dust-free workshop should use a seamless overall ground that is not easy to produce static electricity, wear-resistant and corrosion-resistant. Most cleanroom floors use epoxy artesian flooring, which is a resin-based composite floor. It can not only achieve the effect of mirror decoration, but also has the characteristics of non-toxic, odorless, solvent-free, seamless and wear-resistant.

3. Dust-free workshop design and decoration wall requirements.

The walls of the dust-free workshop should be simple in color, smooth and corrosion-resistant, and the paint or coating on the interior walls should be anti-static, moisture-proof, mildew-proof, and easy to clean. In addition, the junction between the wall and the floor needs to be made with a radius of 50 mm to reduce the accumulation of dust. Crash railings should be installed in the corridor to prevent dust from falling from shaking during the transportation of materials.

4. The air supply pipes and lamps of the dust-free workshop must be arranged in the technical mezzanine.

The air supply pipes and lamps of the dust-free workshop must be arranged in the technical mezzanine, so as to ensure the cleanliness of the workshop. Many dust-free workshops use color steel sandwich panels to seal the ceiling, because color steel sandwich panels have the advantages of light weight, thermal insulation, and high overall strength.

Article summary: The design and decoration of the dust-free workshop should pay attention to the smoothness of the doors and windows, and the materials with good sealing should be selected. The ground should be used, and it should be used without gaps that is not easy to produce static electricity, wear-resistant and corrosion-resistant.

The wall should meet the requirements of simple color, smooth and smooth, and corrosion resistance. The air supply pipes and lamps in the dust-free workshop must be arranged in the technical mezzanine.

What studio is a clean room? In fact, it is a relatively hermetically sealed independent workshop, and it is necessary to set up a sealed corridor around the perimeter of the workshop. The first time I opened the clean room, the first time I touched the decoration, I didn't know anything, and then Tuba Rabbit came to introduce what to pay attention to in the decoration design of the clean room and the clean room decoration renderings.

What should be paid attention to in the decoration design of dust-free workshop.

1。Ground.

Cleanroom floor decoration is a certain attention, now observe that some dust-free workshops basically use epoxy resin self-flowing flooring, because this is the resin composite of the floor. It can not only achieve the effect of mirror decoration, but also has the characteristics of non-toxic, odorless, solvent-free, hard installation and so on. It can be seen that it is not prone to static electricity, abrasion and corrosion.

Repellence. The ground is seamless.

2。wall decorations.

What are the requirements for cleanroom wall decoration? In fact, the color does not need to be complicated, the wall is relatively smooth and flat, it should provide corrosion resistance, and the wall should pay attention to the ground. At the junction of the two, it is necessary to make a radius of 50 mm for the arc and the paint of the inner wall.

Or the paint is preferably mildew-resistant, anti-static, and easy to clean. It should be noted that anti-collision guide rails should be installed in the corridor, which can effectively avoid vibration during material transportation.

3.Windows. The doors and windows of the dust-free workshop are simple in shape and easy to clean every day.

The doors and windows of the cleanroom are not suitable for wood. This material has been used for a long time, and it is especially tolerant of bacteria in the air. In addition, the doors, windows and walls must be flat, no need to design, the door and window materials should be selected with small error, not easy to deform, better air tightness, and the workshop must be well sealed.

This is the only way to prevent temperature differences between indoor and outdoor and condensation to occur.

Tuba Rabbit** provides you with "various decorations**, 1-4 local Peida decoration companies, 3 sets of decoration design plans" for everyone, as well as decoration pit avoidance strategies! Click on this link: [Fighting Sparrow.

You can get it for free

The decoration of dust-free workshop projects generally takes about a month.

How many days does it take to decorate a dust-free workshop at the earliest, it mainly depends on what level of your workshop and whether the decoration requirements are high. If it is very strict and has temperature and humidity requirements, then the choice of air conditioner is the same. Generally, the time of air conditioning equipment is slightly longer, if it is fast, it is about 1 month, of course, it depends on the cooperation of both parties, if one party is delayed for other reasons, it may not be just a month.

When decorating, you should find a reliable company, Manx's main business direction: Jiangsu, Shanghai, Zhejiang, Anhui and other provinces and cities. In line with the concept of "professional because of focus, excellent because of professionalism", the company sincerely tailors the matching office space and production environment for each enterprise by virtue of advanced design ideas, reasonable budgets, sophisticated construction technology, and high-quality full service.

How long does it take to decorate a dust-free workshop to complete, Hunan Chunzhen purification project will answer for you!

The construction cycle of the purification project is affected by the weather, the size of the area, the level, the requirements of Party B, the products or industries produced in the workshop, the floor materials, the difficulty of construction, and the cooperation mode of both parties.

1.If the area is large, the level should be strict, and there are temperature and humidity requirements, it is necessary to use a constant temperature and humidity air conditioning unit, and the general supply cycle of the constant temperature and humidity air conditioning unit is longer than that of ordinary equipment, and the construction period is of course extended accordingly. Unless the area is large and the construction time is longer than that of the air conditioner, the whole project will be affected by the air conditioning unit.

2.The height of the floor, often raining, affects the delivery of materials, the supplier materials do not reach even if they are reached, but also affect the construction period, such as the 1st and 5th floors, the material handling is inconvenient, especially for large plates and air conditioning equipment, of course, when signing the contract.

It will explain the height of the floor and the impact of weather conditions.

3.The cooperation between Party A and Party B is pleasant, and it can be completed in accordance with the specified time under normal circumstances. There are a lot of them, such as:

The time when the contract is signed, the time when the materials enter the site, the time of acceptance, whether the project is completed and completed in accordance with the specified time, and the payment.

Whether the way is on time, whether it is pleasant, whether Party B cooperates in a timely manner (drawings, arrange personnel to evacuate the site in time when starting construction.

etc.). This is generally not a problem in signing a contract.

Therefore, the main point is the first point, and the second and third points are special circumstances, and the specific amount of time is not at any requirement, level, etc

It's really hard to estimate the area. After signing the contract, the dust-free workshop purification engineering company will give Party A a construction schedule.

table, which is clearly written. I'll give you one of them, just for reference. Specific requirements or consultation are also required.

Hunan Chunzhen Purification Engineering Company will give you the answer you want.

Example: To make a 300-square-meter 100,000-level dust-free workshop with no temperature and humidity requirements, it takes about 35 days to do ceilings, partitions, air-conditioning ceilings, ventilation ducts, and ground engineering (one week on the ground), including the completion of acceptance.

The design of a dust-free purification workshop requires consulting a professional purification engineering company.

Dust-free purification workshop engineering decoration process:

1. Determine the plan and sign the contract.

Generally, we look at the site first, and many plans need to be designed according to the site situation and the products produced in the workshop. Different industries have different requirements, different levels, and different levels. It is necessary to tell the designer the decoration level, area, ceiling and beam of the dust-free workshop, and it is best to have drawings.

It is convenient for post-design and also reduces time. After the plan is determined, the contract will be signed and the construction will begin.

Second, the color steel plate partition installation.

It is equivalent to the general frame, and all the partition walls will be done after the material enters the site, and the time is determined according to the area of the plant. The decoration of dust-free workshop belongs to industrial plants, which is generally faster, unlike the decoration industry, where the construction period is slower.

3. Ceiling ceiling.

After the partition is installed, it is necessary to install the ceiling, which cannot be ignored. Equipment such as FFU filters, purification lights, air conditioners, etc., will be installed on the ceiling. The distance between the screws and the plate should be in accordance with the regulations. Reasonable layout to avoid unnecessary troubles in the later stage.

4. Equipment and air conditioning installation.

The main equipment of the clean-room purification industry includes: FFU filter, purification lamp, tuyere, air shower, air conditioner and so on. The equipment is generally a little slower and takes time to make the painting.

Therefore, after signing the contract, it is necessary to pay attention to the equipment entry time. At this point, the workshop installation is basically completed, and the next step is the ground engineering.

5. Ground engineering.

What floor paint is suitable for what floor. What should be paid attention to in the construction season of floor paint, what is the temperature and humidity, and how long can it be entered after the construction is completed. It is recommended that the owner check it first.

6. Acceptance Check whether the partition wall material is intact. Whether the workshop has reached the level. Whether the equipment in each area can operate normally, etc.

Resources.

Hello, glad to answer for you!

What should I pay attention to in the decoration of dust-free workshop? Dust-free workshop decoration is a very technical industry, dust-free workshop is not like our ordinary room, it needs to have a very high degree of cleanliness, and some places also need to have dust-proof, fireproof, heat preservation, anti-static and other requirements.

Therefore, the decoration of the dust-free workshop must have a very in-depth understanding of the industry, and at the same time, the materials used in the decoration of the dust-free workshop must also have a very in-depth understanding, so as to achieve the real sense of "dust-free".

How to choose decoration materials.

First, waterproof gypsum board must be used.

2. The moisture content of wood is not more than 16%, otherwise it is easy to dry crack, deform, loose, etc.

3. The surface of the decoration material has a certain chemical resistance.

Fourth, the decoration materials have a certain oxidation resistance.

Fifth, the shower area, it is best to choose ceramic tiles with anti-slip function.

Sixth, anti-bacterial wall plastic, short life, easy to deform, bulging, low decoration grade.

7. Dust-free workshop decorative panel: decorative panel, commonly known as panel. It is a high-grade charge.

Dust-free workshop construction requirements.

1. Self-leveling ground treatment, thickness 2mm.

2. According to the requirements of GMP specifications, the gap part should be sealed.

3. All accessories are connected to the main structure to prevent loosening and dust falling off.

4. The gap should be sealed on the front.

5. According to the GMP certification inspection standards, meet the following requirements:

a.Choose materials with low deformation.

b.Walls and ceilings should be flat and easy to clean, etc. The colors should be harmonious and easy to identify contaminants.

c.The gaps at each joint shall be sealed.

6. The amount of dust generated in the operation must be cleaned at any time.

7. In the room equipped with filters, there can be no dusty operation.

8. Protect the working surface to avoid plate defects.

Precautions for the construction of dust-free workshop.

1. Before the plate is paved, it should be classified.

2. Before embedding, remove the impurities and keep the surface dry.

3. The entrance of the equipment should be closed at any time to prevent debris from entering.

4. Good ventilation and lighting should be ensured at the construction site.