What should I pay attention to when applying car film?

When many car owners choose a car film, they will only consider whether the film itself is good or not, but they believe that the choice of car film should not only consider itself but also need to know more about it, so let's tell you about it.

In addition to the film itself, you also need a professional film shop, to judge whether the film shop is professional, you can first see if there is a dust-free film workshop, so as to reduce some dust attached to the surface of our glass materials to the greatest extent. Also look to see if there is a special instrument cover or seat cover, if it is more reliable, the store has it.

When it comes to car film, I believe many people still don't know much, after all, the film is simpler to say, and more complicated to say, but what is the real situation, or need to know more about it. Today, let's talk about the small details of car film:

First of all, the first point is the things you need to know before the film, there are still a lot of precautions before the film, such as the weather of the film, many people will be curious, what does the film have to do with the weather?

Answer: Because of the cloudy and rainy weather (small) weather, the air humidity will be relatively large, and the particles in the air will be relatively reduced, which can effectively avoid impurities affecting the construction effect during the film, which is the first choice for filming; In the process of filming, in addition to the air cause, the most important thing is the construction workshop, we must choose the construction store with a "dust-free workshop", in order to ensure the guarantee in the construction, it is best to choose a construction store with a certain authority for installation.

The second point to pay attention to is the precautions when applying the film: the protective measures for the body should be done before construction to avoid the inflow of water during construction, resulting in short circuits; When cleaning the rear windshield glass, it is important to pay attention to the protection of the following heating wires; The most important point to pay attention to when sticking the film is to pay attention to the construction of the gasket film when cutting the film, so as to avoid irreparable consequences caused by accidental scratching of the glass.

The third point is the precautions after the car film: in order to ensure that the film and glass are not firmly pasted enough, do not lift or lower the window within a week to avoid the displacement and warping of the car film;

After the film is applied, it may cause small bubbles or slight ripple marks, which is normal and will disappear naturally after a period of sun exposure. If there is still an obvious phenomenon after a period of time, do not deal with it without authorization, you should find a professional store to deal with it; Do not paste or hang small ornaments such as puppets and dolls directly on the car film within half a month after the film.

Be sure to clean the car before the film, don't wash the car immediately after the film, don't use detergent to clean the car after the film, if there are bubbles, you can use the card to gently scratch, don't stop in the sun immediately after the film, let the sun shine.

Be sure to choose a big brand of car film, and find a professional to apply the film, do a good job of sun protection, and don't always expose the car to the sun. Clean the surface of the car and leave it free of dust.

Before pasting, be sure to scrub the car glass clean, it is best to go to a professional place, ask professional personnel to paste, the size should be good, it is best to be pasted by multiple people, so that it is not easy to produce bubbles, and it can be pasted very well.

Nowadays, the times are changing rapidly, and basically every house has a car. Then after buying a car, the film is also an issue that needs to be paid attention to. After buying a car film, it is not possible to wash the car immediately, and the window can only be opened after the specified time. <>

Generally, after the car is applied, the car cannot be washed within two days. Because the car wash will cause some blistering after the car is filmed, if this situation occurs, it is very unfavorable, because it will affect the later effect of the film, and it will also affect the appearance. If you want to clean your car after applying the film, you can take some towels and wipe them in the position where there is no film, and you can't wipe them directly on it.

I believe everyone knows that after the car is finished, the film master will ask everyone not to raise or lower the window for about a week. Because the film is attached to the window, if it is not within the specified time, the window will be raised and lowered, and the film will be damaged, and some scratches will occur. It is very unfavorable for the later effect of the film, and it will also make the window itself have some scratches, so it is not possible to lift the window after the car is filmed.

Generally, it takes about a week, that is, seven days later, to raise and lower the window. <>

Car wrap can effectively prevent ultraviolet rays in the future, and can also play a role in sun protection in summer, and it is very private. Because after the film is applied, the inside of the car cannot be seen from the outside, and it will also increase the beauty of the body. It will also prevent some people from glare, so the benefits of the film are still very great.

When sticking the film, you can also choose a relatively cost-effective film, so that the effect of sticking it will be better. However, when applying the film, we must pay attention to the film of the car on the inside of the window, which will prolong its aging speed, and will also make the car more beautiful, and will not be disturbed by the outside world, after some wind and rain, there will be no angle.

Precautions after car wrapping.

1.If you have a sunroof for less than three days, do not open the sunroof when driving, especially at high speeds.

2.After the car is filmed, it is necessary to prevent the windows from being lifted within three days.

3.If the edges of the film are blistered, it should be repaired at the construction site within 24 hours. If the time is exceeded, the glue around the bubble has dried out, and the perimeter of the film cannot be moved, and creases will occur during processing.

4.Don't wash your car for three days.

5.After applying the film in winter, the professional master of the car beauty shop recommends that you do not lift the windows and do not wash the car for a week. It takes about a month for the front and rear gears to dry.

During the day, the front windshield should be exposed to the sun. The most important thing to note is that the backshield heating line cannot be opened within a month, because if the electric heating line is opened after the film is applied in winter, bubbles will be generated near the heating line, which cannot be repaired, which will lead to unnecessary losses and troubles.

6.It is forbidden to apply the super glue label directly to the film within one month after the film is applied, so as to avoid the separation of the film from the glass part.

Don't be in a hurry to wash the car after the film is applied, you can wash it only after the film is fixed, and don't use a high-pressure water gun to rinse, it may destroy the car film, and park the car in a cool place, otherwise it will be corrosive to the car film.

In this process, the car can not accept high temperature exposure, nor can it be washed, and it must be reported to the vehicle management office before the film, and the car should not be under high temperature for a long time.

In addition to professional technology, there are also standard requirements for the experience of the film teacher, in addition, for the experienced film master, the film method used by different models and materials is also different. Therefore, the income of this industry is generally high, and many people want to learn, so how long does it take to learn car film?

Generally, if you go to school to learn, it will be almost the same for two or three months, the school's equipment and training consumables are relatively richer, and the training operation is more, which is naturally more convenient, and it can be learned in two or three months, and then it is the accumulation of experience.

If you go to a physical store to learn, the business is good and often the film is about half a year to a year, and the premise is that people are willing to teach you, because of the restrictions on the materials received by the physical store, the opportunity to practice is relatively less, and more for you to see.

Of course, whether you learn in a physical store or in school, only by learning the technique hard and steadfastly, can you really master this technology, you can't fish for three days, dry the net for two days, only continuous persistence, continuous consultation, and continuous practice are the most important.

Pay attention to the protection of the car, pay attention to the appearance of the car, pay attention to the temperature, pay attention to the warranty of the car, pay attention to the way the car is parked, and pay attention to the friction on the surface.

First of all, check whether the film is complete, park the car in a cool and dry place, it is best to call the party after three days or a week to wash the car, the car wash cleaner to be used, do not roll down the window within a week.

Be sure to check the completeness, some of the film male jujube division skills are very poor, easy to cut the whole piece of spring film dismantling, there will be some splicing and fierce splicing, which will bring a lot of losses to themselves and affect the appearance.

The precautions after the car film are: 1. Avoid lifting and lowering the windows within three days after the car film, so as to avoid the displacement of the local car film that has not been fully bonded; 2. Do not wash the car within three days, but wipe the membrane surface with a wet towel, sponge or soft cloth; 3. Do not open the sunroof when the vehicle has a sunroof within three days, especially when driving at high speed; 4. Do not clean the heat insulation film and turn on the defogging line switch within one week after the film. The precautions for new car film are:

1. Before the film, check whether the installation of the window glass is complete and the overall sincerity of the car glass; 2. Clean the inner and outer surfaces of the windows before applying the film.

When choosing an automotive film, in addition to looking at the thermal insulation rate, ultraviolet protection rate, and light transmittance, the most important thing is to look at its quality and whether it is the best.

We can distinguish by the smell, color, feel of the membrane, etc., inferior membrane will cause poor thermal insulation effect, blurred vision when driving, and even emit toxic substances, which will endanger human health.

It should be noted that there is no gap between the film cloth and the car, and the car should be very clean when pasting, so as to ensure good adhesion.

Clean the inner and outer surfaces of the windows before filming, and check whether the installation of the window glass is intact and the integrity of the car glass before filming, so as to ensure that the follow-up film work can operate normally, and do not let the air conditioning wind blow on the film, so as to avoid violent thermal expansion and cold contraction.

Before applying window film, it is important to check whether the glass of the car window is intact. After the film, do not raise or lower the windows in the near future, so as not to affect the effect, and do not clean the heat insulation film.

It should be noted that during the process of applying the film, it is necessary to keep the car clean enough, and then do not leave air bubbles, so that it looks smoother.

When sticking the film, you must choose a suitable film according to your own model, and you must be very careful to ensure that every place can be pasted, and it must be very uniform.

It is necessary to pay attention not to paste some relatively cheap films, and do not destroy the original paint when applying the film, and be sure to protect your original paint, otherwise your car will not retain its value.