What is the reason for the sound of walking on the wooden floor

1. The sports wooden floor is empty.

If the sports wood floor is empty, there are many reasons, one is that the sports wood floor is not fixed when it is laid, the main reason is that the number of nails used is not enough, or it may be that the nails are not firmly nailed. The sports wood floor sports system is fixed with glue liquid, and the gluing does not meet the requirements will also cause the sports wood floor to be empty.

The reason for the abnormal noise of sports wood flooring may also be that the moisture content of the sports wood floor used has changed.

2. Prevention of air wages on sports wood floors.

In view of the common causes of sports wood floor empty wages, one by one elimination and prevention, we can effectively prevent sports wood floor empty wages.

When laying sports wood flooring, nails can not be used too little, in the laying process, each completed piece, must be tested with a foot step, if there is a sound of rework and then paving.

When purchasing and paving sports wood flooring, it is necessary to strictly check its moisture content, and the quality of the adhesive must also be strictly reviewed.

Hello: There are several reasons for the noise of the floor: if the keel fixing fastness is not enough when the wooden floor is installed, the wooden floor and the keel can not be combined smoothly, resulting in the sound of sliding between the wood and the wood.

If the fastness of the connection between the wooden floor and the keel is not enough, when people step on the wooden floor to exert pressure, it will cause a slight movement, which will also cause the sound of the wooden floor. The stiffness of the nail is not enough, in layman's terms, the nail is too soft, so the nail holding force is not enough, which leads to the poor combination between the wooden floor and the keel, which will also cause the sound of the wooden floor. If the sound of the wooden floor is caused by the reason of the appeal, it is the responsibility of the laying unit and has nothing to do with the quality of the wooden floor.

During the use of the wooden floor, the mop with dripping water, or the water is knocked over on the ground and not dried in time, resulting in water seeping into the board and distorting the wooden floor. In this way, the back of the wooden floor is uneven, and the keel cannot be evenly contacted, resulting in a loud sound. After the wooden floor was laid, it was moved in without 12 hours of maintenance, resulting in a loud sound on the wooden floor.

If it is caused by this reason, the noise of the wooden floor is caused by the improper use of the user itself, and has nothing to do with the quality of the wooden floor. If the moisture content of the wooden floor changes, causing distortion and deformation, the moisture content of the wooden floor is unqualified, which is a quality problem of the wooden floor. Therefore, it is recommended that the owner should check the moisture content of the floor when buying wood flooring, of course, when the sound of wood flooring is caused by the quality of wood flooring itself, then it is recommended that consumers should contact the floor manufacturer for coordination.

I hope mine can be helpful to you.

Football World Cup in Brazil, Home Improvement World Cup in Red Star!!

Hello, you need to check to see what is causing it. If you have a keel under the floor or if the floor is directly laid on the ground, it may be caused by uneven ground.

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

Solution: Remove the floor, re-level the ground and then install it; If the floor mat is not sealed well and the floor is slightly deformed, it can be fully glued for construction, and the new board of the bureau can be replaced with serious deformation.

The crux of the problem: the original ground is uneven, and the uneven ground is not modified and disturbed during the installation process.

Solution: Remove the floor, re-level the floor and install it.

The crux of the problem: the gap around the floor is not fully reserved, or the floor mat is not well sealed, resulting in partial or overall arching of the floor after expansion, and the notch floats up and down to produce friction sound.

Solution: If the floor is slightly deformed due to the expansion and cracking of the floor due to the fact that the mat is not well sealed, it can be fully glued for construction, and the local new board can be replaced if it is seriously deformed.

What about outdoor flooring? This question cannot be generalized and should be analyzed according to your specific situation. Here is a brief introduction to the characteristics of outdoor flooring for your reference.

Product features of outdoor flooring: 1. Deep carbonization of outdoor wood flooring: It is to pyrolyze the wood at high temperature to reduce the concentration of hydroxyl groups in the wood components, thereby reducing the hygroscopicity and internal stress of the wood, achieving the purpose of reducing the deformation of the wood, improving the corrosion resistance of the wood, inhibiting the growth of decaying bacteria, and achieving the purpose of weather resistance and anti-corrosion.

2. Anti-corrosion treatment of outdoor flooring: In order to maintain the original strength and beauty of the wood for a long time, it is treated with anti-corrosion and anti-ants. Under the premise of strict quality control, preservatives such as CCA, CA (cupazole), and ACQ are injected under pressure to deeply penetrate the agent, and the agent that penetrates into it can be tightly attached to the wood

For the problem that the solid wood floor walks very loudly, it can only be re-fastened and the floor can be reinstalled.

The main reason for the sound of solid wood flooring after paving should actually be installation. The installation of solid wood flooring generally adopts keel installation, and the process is more complex than the suspension pavement method of other floors, and because of the use of keels of different materials, the problem is more complicated.

First of all, the concrete base is uneven, the skids spacing is too large, the keel pillow is too high, and the keel is not located on the base as a whole, so that the skids are loosened at the parts that often walk, and the keel elasticity increases, and the upward and downward displacement occurs, resulting in the reduction of the keel pavement firmness and may produce noise.

Secondly, the moisture content of the keel pavement is too high, and the moisture content is reduced after gradual drying, and the nail holding force of the wood is reduced at the same time, and the loose keel installation will produce noise.

Finally, there is also the possibility that the moisture content of the concrete base is too high, and the moisture-proof isolation layer is not paved or the moisture-proof isolation layer is not sealed as a whole, so that the keel absorbs moisture, the moisture content increases, and the distortion occurs, and the keel installation is loose and produces noise.

Before installing the floor and flooring, you only need to pay attention to the following processes and methods, and the floor will not be silent:

1. Before installing the dragon, it is generally used to punch holes with a 12mm electric hammer bit, so the wooden tenon should be at least 18-20mm or more square wooden tenon tamping to be useful, and it can not be easily laid down, and the wooden tenon will dry and shrink after a few days;

2. The material of the wooden tenon of the rammed ground is harder than the material of the earth dragon, and the hard shrinkage force of the wood is small, and it is not easy for the earth dragon to pull up the wooden tenon elastic to maintain stability;

3. There is a room with a ground level difference of several centimeters, at this time, the carpenter master will pad some knife-shaped wooden stoppers or three splints under the dragon to ensure the level of the dragon, at this time, don't forget, between the dragons above the height of the dragons, it is necessary to fix each other with a short dragon, to prevent the dragons from swinging left and right, so as to ensure that the dragons are smooth and firm;

4. When installing solid wood floor drilling, the hole diameter must be smaller than the floor nail, so that the floor can eat nails;

5. Reserve more than 1 cm of floor shrinkage joints around the wall to avoid climate change or floor moisture content does not meet the expansion and arching.

1. Caused by uneven ground. The ground is uneven, some uneven, then after the wooden floor is installed, there is a gap between some of the wooden floors and the ground. When people walk around on the wooden floor, they make noise.

In order to avoid this situation, people must level the wooden floor before laying it, and its flatness should be less than 3mm 2000mm, so that after the wooden floor is installed, there will be no sound when walking.

2. When the wooden floor is installed, the surrounding gap is not enough. The lack of gaps between the wooden floors will cause the floor to arch slightly, and people will make a sound when they walk. In order to avoid this situation, there must be enough gaps in the pavement between the wooden floors, especially in the doorway, wall kitchen, balcony and other areas, and when the pavement length exceeds 8m, people should do partitions and bridge treatments.

3. The moisture-proof film is breathable. After the wooden floor is laid, its moisture-proof membrane connection is not sealed with tape, and it is easy to break after a long time, which eventually causes the ground moisture to leak, and a large amount of moisture enters the back of the wooden floor, making the wooden floor deformed, and it is difficult to avoid walking sounds. This kind of general after the paving has no sound, and there will be a sound after a period of time.

Therefore, when the wooden floor is paved, the joint of the moisture-proof film must be sealed with tape so as not to leak air.

Wooden floors can be caused by several factors:

1.Loosening of the floor skin: When the fixed connection between the wooden floor and the floor is loose, there will be a walking sound. This is usually caused by the original floor nails or screws not being stable enough or the screw holes becoming larger. Fixing this problem requires re-fixing the floor.

2.Uneven ground: If the ground is uneven, such as where there are bulges or subsides, it will cause the wooden floor to oscillate when a person walks by, and make a sound in the oscillation. The solution to this problem is to first level the ground and then reinstall the wooden floor.

3.Moisture barrier problem: If the moisture barrier under the wooden floor is damaged or incomplete, it can cause the ground below to become wet.

In this case, the wooden floor will deform when it burns, so it will make a sound when you walk around. Fixing this problem requires recovering or reinstalling the moisture barrier.

4.Temperature and humidity: Wooden floors are sensitive to temperature and humidity.

If the indoor temperature or humidity is too high or too low, the wooden floor will deform, resulting in a sound when walking. Solving this problem requires a proper balance by adjusting the indoor temperature and humidity levels.

5.Deterioration of wood flooring: Wood flooring may become weak over time, which can lead to walking noises. In this case, it is necessary to replace the wooden floor with a new one to solve the problem.

In general, the root cause of walking noise is the unstable fixed connection between the wooden floor and the ground or the uneven ground. Solving this problem requires finding the problem and taking action to fix it.