What should I do if the Apple 5S phone is out of battery and can t be turned on

This situation often occurred in my previous Apple 3G, in fact, the battery can't be charged, so it can't be opened. There is only one possibility, the battery version is aging. Apple mobile phones have a battery plate "protection" function, and the battery board will not be able to turn on if it loses power.

This phenomenon only occurs in Apple mobile phones, and other brands of mobile phones can be turned on even if the power is lost, but it will automatically shut down (because there is no power) after turning it on; Other brands of mobile phones can be charged even if the battery board is aging, but the standby time is very short, while Apple just can't turn on the phone and can't charge it. According to what you described above, it is actually caused by the aging of the battery board and the serious power loss of the electric board.

There is a way to charge it in, but it is difficult for you to do it, connect several (3-5) battery plates in parallel, fully charge them, and then charge the phone with the fully charged battery plates. You can find a place that sells second-hand Macs, or repairs iPhones, and they usually have this kind of charger, because iPhones often have this kind of problem.

Apple) old battery panels, must be charged in advance (not less than 15% before), otherwise the above phenomenon is very likely to occur, and it will also accelerate the aging process of the battery panel.

The biggest factor affecting the life of the battery board is the temperature generated during charging." The fuller the charge, the longer the time, the higher the temperature of the battery panel, and the shorter the lifespan. In the case of aging of the battery board and short standby time, we often take the method of extending the charging time, so that the battery board is at high temperature for a long time, thereby accelerating the aging process, the standby time will be shorter, and the charging time we extend will be longer, so that it will cause a "vicious circle" result!

It's good to rush for a while, because the battery runs out, and you have to charge it to 5% before you can turn it on.

White apples Let's go to the Apple store.

If it is used to turn off the power without power, it will take more than ten minutes to turn on the charging, if there is no display during charging, it is best to take it to the maintenance point to see.

In such a situation, we actually only need to operate in one step, that is, to extend the charging time, and wait for it to be more than 10 minutes

The battery is not sufficient or there is a problem with the phone's software system.

Specific problems and solutions:

Connect the phone to the power supply first, if you see a charging sign on the screen at this time, and the power is very low, it means that the battery is dead, and the charging needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before turning it on.

If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

Charge for ten minutes, it will automatically turn on, or press and hold the power button home at the same time, hold and hold it for five seconds, and automatically turn on to thank you.

Plug in the data cable, leave it alone, and flush it for a while.

Slowly, there will be a reaction.

This kind of phone shouldn't be fully charged!

You may have gone to sleep with the battery.

Just like some mobile phones with detachable batteries, if the mobile phone is out of power and has not been used for a long time, the electric board will automatically enter the sleep state, so that the electric board must be taken out and charged with a universal charge for about 10 minutes to wake up, and then put the electric board into the mobile phone with direct charging, so that the charging will be successful, otherwise the direct charging is invalid; In your case, you should go to the maintenance point and let people try to charge the multimeter at home, and test it to see what the cause is, will it be like I said that the battery is dormant, or the electric board is broken? When the master is cultivating, you must keep an eye on it, don't let him say anything nonsense, bluff you, and ask you to spend money in vain, good luck

If the phone is out of power, it will naturally not turn on, connect the charger, charge the phone, and then press the power button, and you're good to go.

Solution. 1. Connect the charger, wait for about 10 minutes, and then try to turn on the power button.

2. Replace the original charger and charging cable to see if you are using irregular accessories.

3. If you still can't turn it on, go to an Apple after-sales store to check, it may be a malfunction of the phone or a damaged battery.

The reasons and solutions for not turning on the machine are as follows;

1.When the battery is depleted, the battery will enter the sleep state, and it needs to be charged for 10-20 minutes to activate the battery before it can have enough power to turn on.

2.The system cannot be turned on due to the bricked system, and the official firmware can be re-flashed to boot.

3.If the hardware failure causes the machine to fail, you can turn it on by going to a store or after-sales inspection and maintenance.

It is normal that you can't turn on the machine if you don't have a little bit of electricity, because the boot process needs to run the program, and the running program needs energy, this energy is the power supply, and you can't turn on the machine if you don't have enough electricity!

If there is no power, you will definitely not be able to turn on the phone! Charge it first, then turn it on!!

Replace two more Remember it**.