How to repair the broken shower hose and how to fix the metal hose of the shower?

1. There is a gasket in the shower hose that is rubber, if it is damaged or deformed, you can directly take the shower hose to the hardware store to replace it, to choose the same model, you can consult the boss and let him give you a new one. Rotate it clockwise to use it normally, and there will be no water leakage after installation.

2. After the shower pipe is used for a period of time, there is a lot of scale, so we can add baking soda to the clean water, and then add a certain amount of white vinegar, soak the hose in it and clean it, you will see a lot of black dirt floating on it, which also means that the scale inside has been cleaned, and then rinse it with clean water and reinstall it on the shower.

3. If the shower hose has been damaged, replace the new hose directly, unscrew the hose from both ends of the shower or faucet by hand, and then replace it with a new shower hose. One end is installed at the shower and the other end is installed at the faucet, because there are threads on it, so it doesn't take much effort for women to operate it at home.

The outside of the stainless steel protective ring is not recommended to repair, because it is not easy to repair and easy to hurt the hand, if it is because of water leakage can be simply repaired, remove the shower head and pry open the copper gasket cap to see that there is a white inner tube inside, take it out and cut off the broken section and then install it according to the original method.

The hose of the shower should be screwed on the outlet at the bottom of the mixing valve, and there is a screw buckle at the bottom of the mixing valve, and the screws of the hose can be screwed on. If the thread buckle of the outlet pipe is not outside, you can first loosen the screw at the bottom of the handle of the mixing valve, remove the handle, and then unscrew the nut on the decorative cover to remove the decorative cover.

Hello dear and happy to answer for you. Repair method for falling off metal hose of shower: 1

Replace the shower hose. To replace the old hose, simply unscrew the hose from the shower and the sides of the faucet by hand. Then replace it with a new shower hose, one end screwed on the shower and the other end screwed on the faucet, and there are screws on the screw.

But I can use some strength. 2. Repair the shower hose. You should keep the metal hose in a natural stretch state when you usually shower, and insert the shower head on the shelf after using it, and never want to coil the metal hose on the flower pants and sprinkler faucet.

Usually when pulling the hose, you should avoid the connection between the hose and the valve body and do not want to form a dead knot, be sure to look carefully, and pull the hose lightly, so as to prevent the metal hose from being broken or the hose from being damaged.

The hose is broken.

What is easy to break is the hose, I specialize in selling that, the hose is better to buy, buy the double buckle internal three yuan ethylene propylene propylene (propylene), so good, not expensive, about 20 yuan, and.

Pay attention to see if the interface of the water separator is cracked, and the water separator is fine, that is, the hose is broken

The first thing to do is to replace the old hose and unscrew it from the shower and the ends of the faucet by hand. Then replace it with a new shower hose, one end of the shower and the other end of the faucet, and have threads to screw it on.

However, it takes some force, and it is generally better for a man to do it.

The difference between various types of shower hoses:

Most of the shower hoses are metal hoses, and a small part of PVC hoses. Metal hose: maximum pressure 20bar, tensile strength 80 pounds, operating temperature -20 degrees - 100 degrees, the inside is PVC or EPDM material, the appearance is stainless steel.

PVC shower pipe: high pressure 30bar, use temperature -5 degrees - 80 degrees. There is no difference between the two, except that the pressure resistance and the temperature of use are different.

Precautions for installing shower hoses:

1. Measure the height before installation to facilitate later use.

2. When installing hot and cold water pipes, it is necessary to ensure that their height is consistent. And the distance between the center space should be kept at about 15cm, so that it is more convenient to use.

3. When installing the shower faucet, don't forget to wrap the faucet with plastic film to avoid damage to it during installation.

4. Before installing the shower faucet, it is necessary to clean the pipeline, so as not to cause a certain degree of damage to the faucet and shorten the service life due to the residue of impurities.

5. After installing the shower hose, the site needs to be cleaned up, so as to maintain the cleanliness of the room.

The shower is a must-have object for us to bathe because it can expand the area of the shower, but people will always encounter the situation that the shower is broken in the hose when using the shower, and because of this, how to replace the shower in the hose is the most curious, so I will take a look with you.

The shower is broken in the hose is a situation that many people encounter, like this method of replacing is very simple, first buy a new hose according to the actual specifications, if the actual allows, you can bring the hose to the store to choose; Then cover the shower with a cloth and unscrew the tube connected to the shower and water outlet by hand; Then tighten the new tube with one end facing the shower, following the spiral texture upwards, and the other end is fixed with the water outlet.

How to solve the problem of the shower broken in the hose is a question that many people have, in this case, it is recommended to turn off the valve first, and then remove it, find the small hole below and unscrew the screw, you can easily take out the handle. Next, you need to remove the outermost plastic cover, you can see the joint, you have to loosen it, and then replace it with a new one. After changing, be sure to check it to see if it can be used normally.

It is best to choose the whole set of all copper, that is, the main body of the faucet and the straight pipe are copper, and the chrome plating layer should be thicker, which can be cleaned casually in the future use can be as bright as new. The faucet valve core should be made of ceramic valve core, which has a good sealing effect. It is best to go to the physical store to actually experience the smoothness of the opening and closing of the handle, and some of them need to be switched and closed forcefully are not easy to use.

Also see if the water from the shower is even, and it is more comfortable to take a bath with even water.

Enter the area and get the decoration for free**].

We all use the shower in the bath, it is an accessory in the shower, easy to use, can be pulled at will, can make the bath more comfortable. Because it is often pulled in use, it is easy to be damaged after a long time, how to repair the leakage of the shower hose? How to buy a shower hose?

How to fix a leaking shower hose.

If it is caused by improper installation, it can be disassembled and reinstalled; If its rubber ring is deformed, replace it with a new rubber ring; If the internal hose is broken, replace it with a new hose; If it is caused by too much limescale in the hose, you need to disassemble the hose and rinse the stain from the hose family.

How to buy a shower hose?

1. Look at the surface.

Although hose products are generally similar on the outside, there are actually some differences. Most of the high-quality hoses are made of stainless steel, with a smooth appearance and evenly distributed gaps. The stainless steel material not only protects the inner tube, but also has a good explosion-proof effect.

2. Look at the hose material.

In the use of showers, both hot and cold water need to pass through the hose and then reach the sprinkler, so when combusting, we should pay attention to the stability and heat and cold resistance of the hose. Generally speaking, most of Zhaoye's high-quality hoses are made of EPDM, which has good heat resistance, strong aging resistance, and is not prone to expansion.

3. Look at flexibility.

In use, because the hose needs to be pulled frequently, it also has certain requirements for flexibility, and EPDM rubber is a good choice, which has good flexibility and is not easy to deform even if it is pulled frequently.

4. Look at the tightness.

In order to avoid hose leakage, it is best to choose an all-copper hose connection when installing, the all-copper connection is not only sturdy and durable, but also has a good leak-proof effect.

Do the math how much it will cost you to renovate your home