How to raise the longevity flowers I just bought?

It is best not to change the pot of the longevity flowers that you have just bought. If it must be replaced, it should be replaced after it has adapted to the new environment. Temperature:

It is recommended to keep it at around 20. Lighting: It is recommended to provide scattered light, and shade is required when the light is strong.

Watering: Watering must be in moderation, and do not allow water to accumulate in the soil. Wait for it to acclimatize before resuming normal watering.

If you have just bought a longevity flower, you should first check whether the potting soil is hardened, or hard, if this is the case, then you should replace it with new potting soil. The requirements for the soil are not very high, and generally as long as they are breathable, loose and well drained, they can be used.

The longevity flowers that I just bought come with very small plastic pots, which can be used for normal growth, but it is not enough to grow. However, do not change the pot immediately, because the plants are more fragile when they have just arrived in the new environment, and it is best to wait until they are used to the new environment.

The temperature is more important for the longevity flower that has just arrived in the new environment, and it should be controlled at about 20 degrees, so as to shorten the time it can adapt to the environment. If the temperature is not right, there is a high chance that the leaves will turn yellow, soften and fall off.

The growth of longevity flowers needs to be exposed to light, but when you first buy them, you should avoid light. Because longevity flowers are relatively fragile, light will not only not play a role in promoting growth, but is easy to burn the leaves, so they should be moved to a shaded and ventilated place for cultivation first.

Be sure to do it in moderation. For the longevity flowers that you have just bought, you should not water them too often, and the amount of watering should be controlled. Don't water too much, otherwise it will easily hurt the roots.

Don't be in a hurry to repot the kalancholi, its root system will adapt to the environment in the original pot. If you repot too early, it will have to change when it enters the home environment, and it may cause damage to the root system when repotting. It will cause insufficient water or nutrient intake, causing root rot and other phenomena.

It is best to let it grow for a while, and when you see new flowers opening or new shoots growing, it acclimatizes to the environment before repotting.

Do not put the window sill balcony and other strong light environments too early, it is best to put it in a bright place, gradually exposed to the sun, can enhance its ability to adapt to the environment.

It is necessary to judge whether it is necessary to replenish water according to the condition of the potting soil, and it is inconvenient to water it at the flower market or during transportation, which may cause the potting soil to be too dry. In this case, it is necessary to replenish water in time to allow it to resume growth.

Don't be in a hurry to fertilize it, most flowers are not recommended to be fertilized during the flowering period, improper fertilization will have an impact on the flowering period.

The longevity flowers you just bought should be isolated from the flowers at home for a certain distance, and there may be some pests and diseases in the breeding or sales process. If it comes into contact with it, it can be infectious, so when there are no signs of pests or diseases, put it together with other plants.

1. Sunny environment.

Longevity flower is a light-loving plant, so in the cultivation method and precautions of longevity flower, it is necessary to provide a sunny environment for it to grow strongly. Longevity flowers can be placed in the sun to receive more than 4 5 hours of direct sunlight, pay attention to avoid strong direct light at noon in summer, and do a good job of shading.

2. Breathable potting soil.

Breeding longevity flowers should also choose breathable pots and soil for them, and generally choose to use clay pots for the planting of longevity flowers, but its drainage is poor, so it is necessary to pay attention not to accumulate water. The soil can be mixed with the same amount of garden soil and river sand, so that it has good air permeability to meet the growth needs of longevity flowers.

3. Water and fertilizer management.

In the process of longevity flower breeding, it is necessary to do a good job in water and fertilizer management, which has good drought tolerance, so it does not need to be watered too much, and the soil can be watered once every 2 or 3 days. In summer, it is necessary to stop fertilizer in time to avoid accumulating fertilizer and burning roots, and the rest of the time can be applied once in about 20 days for a thin Bika water-soluble fertilizer.

1. Soil selection for longevity flower breeding.

Cultivation methods and precautions for longevity flowers: teach you how to breed them by hand.

Longevity flowers should not be cultivated in heavy soil, otherwise it will lead to poor growth, rotten roots and leaves, and in severe cases, plant death. The potting soil should be prepared with 4 parts of humus, 4 parts of garden soil, 2 parts of river sand, and a small amount of bone meal. This kind of culture soil is loose and fertile, has good drainage performance, and shows a slightly acidic reaction, which is conducive to root development.

2. Fertilization method of longevity flower breeding.

Cultivation methods and precautions for longevity flowers: teach you how to breed them by hand.

Longevity flowers should not be cultivated in heavy soil, otherwise it will lead to poor growth, rotten roots and leaves, and in severe cases, plant death. The potting soil should be prepared with 4 parts of humus, 4 parts of garden soil, 2 parts of river sand, and a small amount of bone meal. This kind of culture soil is loose and fertile, has good drainage performance, and shows a slightly acidic reaction, which is conducive to root development.

Cultivation methods and precautions for longevity flowers: teach you how to breed them by hand.

In the peak growing season, thin compound liquid fertilizer can be applied every 15 to 20 days to promote vigorous growth and lush flowering. After the flower bud formation in November, potassium dihydrogen phosphate or superphosphate was applied 1 or 2 times, and the flowers were many, colorful, and the flowering period was long.

3. Watering method of longevity flower breeding.

Cultivation methods and precautions for longevity flowers: teach you how to breed them by hand.

Like other succulent flowers, kalanchops contain more water in their bodies and are more resistant to drought, so they do not need to be watered extensively. During the growth period, as long as it is watered every 2 or 3 days, keep the potting soil slightly moist. In winter, when the temperature is low, it is even more important to control watering.

If there is too much watering, poor drainage, and too wet potting soil, it is easy to cause root rot.

Cultivation methods and precautions for longevity flowers: teach you how to breed them by hand.

Longevity flowers are very easy to raise, raising longevity flowers only need to provide him with fertile soil, and then pay attention not to give longevity flowers too much water or too frequent watering, otherwise it will be waterlogged, which is not conducive to flower growth.

Fertilization needs to be controlled after summer, and phosphorus and potassium fertilizers need to be increased after the beginning of autumn. 3.Temperature:

Longevity flowers are not frost-resistant, and the temperature must be kept above 15 to ensure normal opening. 4.Soil:

Longevity flowers need to use loose and breathable soil, and in the absence of humus, coarse river sand can be mixed with the original soil.

Longevity flowers are easy to raise and have a high survival rate, as long as they don't dry up.

1.Light: Longevity flowers like light, except for appropriate shade in summer, all seasons need to be exposed to full light.

2.Fertilization: Fertilization needs to be controlled after summer, and phosphorus and potassium fertilizers need to be increased after the beginning of autumn.

3.Temperature: Longevity flowers are not frost-resistant, and the temperature must be kept above 15 to ensure normal opening.

4.Soil: Loose and breathable soil is used for longevity flowers, and coarse river sand can be mixed with the original soil in the absence of humus.

5.Pest and disease problems: carbendazim can be used to prevent them in advance.

1. It is easy to raise. Kalancho prefers a drier environment and is less sensitive to air humidity.

2. Prepare for longevity flowers like a sunny environment, and be sure to give sufficient light when the bud period is about to open.

3. Longevity flowers can often apply some compound fertilizers, fertilizers with a relatively balanced amount of nitrogen, phosphorus and potassium.

4. Loose indoor flowers, can be pleasant, cultivate sentiment, and add interest to life, but also can decorate the home, so that the environment is full of vitality, longevity flowers are very popular flowers, quite popular among people.

Seeing that some flower friends ask whether longevity flowers are easy to raise, you can tell flower friends very responsibly that longevity flowers are very easy to raise, and they are a plant that is very suitable for novice flower friends, and the flowering period is still long, and there are many flower colors, in short, it is a bunch of advantages, let's take a look at how flower friends maintain longevity flowers.

The longevity flower in the illustration is planted in a shallow 10 cm pond in the spring with 4 leaf cuttings. The soil is not deep, and it is usually necessary to occasionally inject insecticides, so that no insects will eat the leaves. From spring to autumn, it is raised outdoors, and it didn't rot when it rained for a month last summer.

Usually there is a lot of water, a lot of fat and a big sun. In late autumn, dig up the flower pond and transplant it into a pot. Until the temperature drops below 5 degrees, it is still raised in the open.

Move below five degrees to a sunny position in the balcony. Waiter.

The buds of longevity flowers will have phototaxis when they grow, so pay attention to rotating the pot. Then just wait for it to open. After flowering, cut off the residual flowers and re-plant the seedlings with branches.

I'm worried that I have such a big longevity seedling, and there will be no place to throw it away when the time comes. I don't top, sunlight is the best branch differentiator, and it naturally grows like this. As for the use of fertilizer, it has always been the water fertilizer after the vegetable leaves are soaked in water.

It can be watered in 3 days in the summer. And it won't burn seedlings. Sometimes I go to the vegetable market and pick up some vegetables that people can't sell and throw away.

Sometimes it's the husk of corn. Sometimes it's the shell of soybeans, and the shell of the white soybeans, and it's all water soaked in vegetables anyway. Fruit sellers like pineapple skins can be used.

Watermelon rind, soy milk dregs, etc., are thrown into the bucket to soak anyway. Look at the taste of vegetable water, dilute it with water when it is thick, and the taste can also be used directly.

Good to feed.

Longevity flowers are autumn bulbous greenhouse flowers, like other plants of the genus Narcissus, they like full sun, have tenacious vitality, can tolerate semi-shade, and are not cold-tolerant. In July and August, the leaves are dormant, and the flower buds are differentiated at the growth point of the bulb during the dormant period, which has the physiological characteristics of autumn and winter growth, early spring flowering, and summer dormancy.

Originally found only in the Iberian Peninsula, it was often used as a horticultural plant in earlier periods, so it was found in the south of France, Italy and Dalmatia. Introduced and cultivated in China for ornamentation.

The first step in hydroponics is to choose Jianshen tap water or yellow spring water, which can be left for two days. Then put the plant in a prepared vessel with water, and then observe whether the water has submerged 1 3-3 4 of the roots, if there is more, throw away the tama part, if there is less, add it.

Hydroponics precautions for longevity flowers

1. After the first step of hydroponics is done, you can place the hydroponic longevity flowers in a place with good ventilation with sunlight. Pay attention to light measures, and there must be enough sunlight during the growing season of longevity flowers.

2. Although soil culture has a certain amount of abundant nutrients, as hydroponics, you can also add nutrient solution appropriately to provide nutrients for the growth of hydroponic longevity flowers.

3. When hydroponic longevity flowers, we should pay attention to changing the water frequently, you can change the water once a week, and pay attention to the water change, do not let the leaves touch the water, otherwise it will cause the leaves to rot.

Conclusion: The above is the basic steps of hydroponics of longevity flowers, in fact, it is quite simple, if you are interested in hydroponic longevity flowers, you may as well go to the flower market to buy a pot and try to make bucket hydroponics. I believe that according to these methods, you will be able to hydroponic your own satisfactory longevity flowers.

1. Longevity flowers are easy to feed.

2. Longevity flowers are autumn bulbous greenhouse flowers, like other plants of the genus Narcissus, they like full sunshine, and their life force is tenacious, and they can tolerate semi-shade and are not cold-tolerant. From July to August, the deciduous leaves are dormant and the flower buds are differentiated at the growth point of the bulb in the dormant period, which has the physiological characteristics of autumn and winter growth, early spring flowering, and summer dormancy.

3. Originally only distributed in the Iberian Peninsula, but it was often used as a horticultural plant in the early period, so it was born in Zifan, Italy and Dalmatia in the south of France. Introduced and cultivated in China for ornamentation.