Is there an after sales service center for Biosys watches?

Updated on vogue 2024-07-25
12 answers
  1. Anonymous users2024-02-13

    Watch maintenance should be clear about the fault situation, such as fast and slow, water ingress, magnetism, watch appearance damage, etc., different brands and models of mechanical watch repair ** is very different.

    If the watch is only magnetically magnetized, the watch is not accurate, then the maintenance cost of such a watch is free of charge. If the watch has not maintained the movement for a long time, resulting in the drying of the oil sludge in the watch, resulting in the inaccuracy of the watch, you need to know which type of movement model of the watch is, different watch movement models, and the cost of repairing and researching the movement is different. If the quartz watch of tens of thousands of yuan is inaccurate, it may be caused by the watch battery being out of power, and the watch maintenance only needs to replace the new battery.

    The cost of replacing the battery is relatively low.

  2. Anonymous users2024-02-12

    If your watch is still under warranty, you can go to the after-sales service and ask. If the warranty period is over, you can go to a professional watch repair center, where the repairers are usually professionally trained. Just like my Cartier was repaired at the Beijing Jingshi Hengda Watch Repair Center, and it has been more than a year now, and there has been no problem with the watch.

  3. Anonymous users2024-02-11

    You can look for a lot of watches.

  4. Anonymous users2024-02-10

    1. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture.

    Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

    2. Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

    3. Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will all disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

    Fourth, put it in a rice jar and bury it deep in the dry rice for a period of time, if it is fast, you can see the obvious effect in one night.

    5. Put the watch on the TV, table or other places in the room before going to bed at night, but do not use it in an indoor area with air circulation (it is best not to open the window), because the humidity in the room will be relatively low at night, and it is easy to evaporate the water!

    6. It is best to seal the watch with granular dry matter, and after a few hours, take out the watch to eliminate the stagnant water in the watch.

    Seventh, the reverse is to wear it, that is, to paste the words **.

  5. Anonymous users2024-02-09

    How to deal with water ingress into the watch:

    If you accidentally get water inside your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can remove your watch and the water will disappear. This method is simple, convenient, and economical, and does not compromise the accuracy or longevity of the watch. In addition, the silica gel that has absorbed water more than 100 times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used repeatedly and repeatedly.

    Chengdu Famous Watch Repair Center: Room 05, 24th Floor, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu.

    With the concept of quality assurance and integrity management, all employees have been professionally trained, with excellent technology and rich experience, to better serve merchants and customers, we adhere to the tenet of "customer first, attentive service, integrity management", 24-hour service**: 4000-562678

    The customer service center is equipped with professional letters, answering **, understanding customer needs and answering questions, and your satisfaction with our service will be our honor.

    Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the table can eliminate the problem. Do not bake the watch close to the fire, so as not to deform the watch by heat.

    If there is water in the watch, you still have to go to the repair shop to wipe the oil and repair it to prevent the parts inside from rusting.

    Water ingress into the watch is a common fault of the watch, and it is also a very harmful failure.

    Water ingress of the watch may cause rust on the internal movement parts of the watch, although the watch parts are now treated with anti-rust, but some tiny parts are still easy to rust, so it is better to repair the watch as soon as possible once the watch is flooded.

  6. Anonymous users2024-02-08

    Copycat watches are completely produced by small workshops in the country, with domestic cheap movements, the cost is only about 100 yuan, and they are sold for hundreds of yuan.

    This kind of watch is only sold online, there is no physical store at all, and there is no after-sales service at all, and the quality is poor.

    There is no need to repair this kind of watch if it is broken, the movement is too bad. It's not good to fix.

  7. Anonymous users2024-02-07

    There should be no, as far as I know, Julishi watches should not be repaired, in fact, a little more professional watch maintenance can be repaired, as long as the credibility is higher, the master with better technology can watch the master repair on the spot is the best hall resistance, I hope to look at my help to you!

  8. Anonymous users2024-02-06

    You can call their after-sales ** to try it, and it can be guaranteed during the warranty period.

  9. Anonymous users2024-02-05

    If there is any problem or something happens to your watch, please contact the official customer service below. This makes it easy and quick to find the watch after-sales center. You can also go to the Desier jewelry store on Sanyuan Street in Chongzhou, which supports the repair of all kinds of famous watches.

    Generally, regular watch repair shops can also carry out watch repair and other items.

  10. Anonymous users2024-02-04

    Why don't you make friends, I'm not cute enough?

  11. Anonymous users2024-02-03

    Julius Watch IntroductionJulius, a famous Korean watch brand, was founded in 2001, born in Tokyo, Japan, and was designed and founded by Tatsurohorikawa. Julius watches are from South Korea.

    How to distinguish the real from the fake:

    1 Look at the feel of the wind, it should be tightened first and then sent.

    2 Look at the logo of laser anti-counterfeiting

    3 Look at the digital anti-counterfeiting label, each real watch is unique, you can query the official website 4 Look at all the corners and corners, the fake watch will not be numbered in the corners and corners of the pure manual printing, experience.

  12. Anonymous users2024-02-02

    If you have a watch change tool, you can disassemble it yourself, buy it yourself and replace it with electronics, if you don't know it, you can go to a place that specializes in changing watch electronics, and let people disassemble your watch and replace it with electronics, you only need to pay

    Related questions
    14 answers2024-07-25

    Germany Bayer please! Pet-only.

    21 answers2024-07-25

    The electric car of the knife is of good quality, and the after-sales service is also okay. >>>More

    3 answers2024-07-25

    Lack of power: Some friends do not wear the watch every day, or wear it for a short time every day, which leads to the lack of power of the automatic watch and the watch does not go. Automatic watches wind the watch by moving the arm, and if you don't exercise enough or don't wear it, the watch won't go. >>>More

    18 answers2024-07-25

    There are many places, mainly depending on what brand you are, and generally brand-name watches can be handled

    12 answers2024-07-25

    The 3 Omega watch repair shop is located on the 11th floor of Block D, World Trade Center, Central, No. 6 Jianwai Street, Chaoyang District, not in Sanlitun. >>>More