Will the brake pads that left the factory in 08 still work now?

There is no fixed saying that the brake pads are changed how often, it depends on the driving road conditions and driving habits, these habits will affect the use of brake pads, and a pair of brake pads can reach 100,000 kilometers if they are used well.

The brake pads that left the factory in 08 have been 12 years now, and they have run a lot of mileage according to normal terms, so they are not suitable for continued use.

According to the normal driving situation, the service life of the front brake pads is about 3-50,000 kilometers, and the service life of the rear brake pads is about 6-100,000 kilometers.

The replacement cycle specified by the automobile manufacturer is not exactly the same for different models, and the specific replacement cycle is subject to the standard value required by the automobile manufacturer. Generally speaking, the service life of the brake pads also determines the replacement cycle, replacing the front brake pads every 3-50,000 kilometers, and replacing the rear brake pads about 6-100,000 kilometers. Don't get too caught up in these numbers, it's not a fixed value, and it needs to be judged according to different driving environments and personal driving habits.

Under normal driving conditions, the brake pads should be inspected every 5000 kilometers or so, not only to check the remaining thickness, but also to check the wear status of the brake pads, whether the degree of wear on both sides is consistent, whether the return is normal, etc. If an abnormal situation is found to be dealt with immediately, you should develop the habit of regular inspection and timely maintenance, and you must not wait for the friction material to be worn out before replacement, which has great potential safety hazards.

It's been so long, and the quality is definitely not as good as the new one, so it's recommended to buy a new one.

I haven't tried how old it is, and it's not expensive, so buy a new one.

Yes.

The thickness of a new brake pad is generally about that, and when the naked eye observes the thickness of the brake pad is only 1 3 thick (about that. The owner will increase the frequency of self-inspection and be ready to replace it at any time. With continuous friction in use, the thickness will gradually become thinner.

There are some models that do not have the conditions to be viewed by the naked eye due to the design of the wheels, and the tires need to be removed to complete.

Precautions for the use of brake pads.

The installation of new brake pads should be clearly distinguished from the inside and outside, and the friction surface of the brake pads should be towards the brake disc to make the disc fit appropriately. Secure the attachment and tighten the pliers. Before tightening the pliers, apply a tool to push the plug on the pliers back into place to facilitate the placement of the pliers.

If you need to replace the brake pads on the drum brake, it is recommended to go to a professional repair shop to ask professionals to operate to avoid mistakes.

Brake pads are the direct effect of the brake effect of the car, if the brake pads are worn to the limit and not replaced in time, it is very dangerous for the car, directly threatening the personal safety of the people in the car, so the inspection and maintenance of the brake pads can not be sloppy at all.

The old brake pad can be sold for money because its shell is iron, but there is not much iron, and it is sand and some metal particles and glue inside.

What kind of money can you sell for what things have been eliminated, you don't want it yourself, who will want it.

Three or four hundred batteries, or general, if you buy a new one, remember to take the old one, get a professional battery that can be sold for a hundred dollars, the price difference between brake pads is large, the general more than two hundred, the quality of more than 100 is not very good, after all, it is safe things, or be careful.

Yes, but it's probably not worth much, who will replace the old brake pads? Unless there are not many kilometers. It is recommended that you go to the place where the car is repaired and ask.

Please choose the original brake pad for replacement, not only because the performance of the original brake pad is the best skin, but also because your driving safety and brake quality are closely related to the brake pad.

The structure of brake padsMost people think that brake pads are made of iron sheets and friction materials. In fact, brake pads consist of friction material, insulation, adhesive, backplate, muffler, and alarm. Among them, friction material is the core of brake pads, and the formula of its materials is the core technology of various brake pad bucket manufacturers.

Currently, more and more asbestos-free organic materials (NAOs) are being used. The heat insulation layer needs to be resistant to high temperature and high pressure to isolate the high heat generated by the friction between the brake pad and the brake disc during high-speed braking, so as to avoid the high-temperature air resistance caused by the heat transfer of the brake fluid to the brake cylinder, and keep the braking distance stable. The adhesive layer is used to bond the friction material and the backplate to ensure reliability and stability.

The backplate is used to support the overall structure of the brake pads and transmit braking force. Every part is critical, and details such as the chamfer, shape, grooves, etc., of the friction material can affect brake acoustics and performance.

After the design of the matching system-level test certification brake pad is finalized, in addition to the physical characteristics of the brake pad, it is also subject to system-level testing (together with calipers, brake discs, bearings, etc.). ) will check the coefficient of friction, wear and eccentric wear properties, roughness, temperature and attenuation characteristics, and NVH performance of the system. The brake system has excellent performance and durability stability.

Vehicle-level testingAfter all system-level tests have been completed and passed, vehicle-level performance and durability testing is required. The performance test ensures that the brake pads and brake system meet the requirements of national mandatory laws and regulations, including basic performance, fade performance and limit evaluation performance, and NVH performance. The endurance test evaluates the stability between the braking system and the interface of each component to ensure that the whole system can maintain stable and excellent performance even after complex environments and empty fiber load input.

To sum up, the brake pads of the original car have undergone multiple rounds of matching tests and performance optimization, and finally select the optimized brake pads that meet the characteristics of the car and the needs of target customers, which can effectively guarantee the durability and safety of the car. So choose the original brake pads!

Millions of car purchase subsidies.

Today, Bian Xiao Automobile will give a brief introduction to friends, the brake pads must be replaced with the original! Friends should basically know that brake pads are also called brake pads. In the braking system of the car, the brake pad is the most critical safety component, and all the braking effects are basically determined by the brake pad, so a good brake pad is the guarantee of people and cars.

So, here's the problem. What is the replacement with the original? Below, let the car Bian Xiao give a brief introduction to friends, the brake pads must be replaced with the original!

Do brake pads have to be replaced with the original ones: fake brake pads?

Fake brake pads will be &ldquo excellent &rdquo or &ldquosoft &rdquo. Too much friction material will affect the acceleration wear of the brake disc, and at the same time will cause large braking noise, affecting the braking distance to increase by more than 30%, and the brake pad may crack during emergency braking. The most important thing is not to give the car the best braking power.

ldquosoft&rdquo it will soon state bu wear out. During continuous braking or high-speed emergency braking, the temperature will rise sharply, or the braking force will drop significantly in rainy days, and the decline will be serious. The surface material will fall off, prolong the braking distance, and may even cause brake failure and cause driving accidents.

Nowadays, people pay more and more attention to the safety factor of the car, and a car is also equipped with more and more brake assist systems to improve driving safety, and the two most basic components of the braking system - brake discs and brake pads are the key to braking.

Brake pads are also called brake pads. In the automotive braking system, brake pads are the most critical safety components.

Basically, brake pads play a decisive role in all brake effect books, so good brake pads are the guarantee of people and vehicles. We need to check the brake pads frequently to see if they need to be replaced.

Do brake pads have to be replaced with original: disadvantages of fake brake pads.

Most of the inferior products basically come from small manufacturers and small workshops, so the brake pads produced do not have any quality and after-sales guarantee.

Due to the use of more waste materials and cutting corners, the quality of the brake pads produced is not good, and it is very likely that the brake pads will break when braking vigorously, resulting in brake failure.

The use of substandard materials is likely to increase its thermal attenuation and thermal conductivity, which will reduce the braking effect of the car.

Inferior brake pads will increase the wear and tear of the brake disc, and even damage the brake disc when in use, which will not only reduce the service life of the brake disc for a long time, but also bring safety hazards to normal driving.

Well, the brake pads that the car briefly introduced to friends today must be replaced with the original ones. That's all. Seeing this, I hope friends have the necessary understanding. After all, brake pads play a safety role. If you want to know more, please follow this**!

Millions of car purchase subsidies.

It is recommended to check the brake pads regularly, and the bridge is replaced once in about 3-60,000 kilometers for ordinary family cars. The importance of replacing the brake pads of sensitive socks and the judgment method when replacing the brake pads are as follows

The importance of replacing the brake pads:

When the vehicle is driving 40,000 kilometers to 60,000 kilometers, it is necessary to replace the brake pads once, because if the vehicle does not replace the brake pads for a long time and continues to drive, there will be some hidden dangers of safety accidents at any time. If the brake pads are replaced too early, the brake pads can be used for a while, which is also a wasteful behavior. But if the brake pads are replaced too late, it is easy to affect your driving safety, so the time on the brake pads is also very important.

Judgment of brake pad replacement:

If the thickness of the brake pads is less than or equal to mm, it is the most suitable time to replace it. For many people, it is difficult to know the thickness of the brake pads, but if the brake pad indicator light on the dashboard of the car is on, you must check the thickness of your car's brake pads at this time.

Millions of car purchase subsidies.

<> Do Your Brake Pads Need to Be Replaced?

Brake pad is a small part of the car, but it has a very important position and is an important safety component in the automobile braking system. So how do we tell if the brake pads need to be replaced?

1. When the brake pads have abnormal noise when braking.

2. When the wear alarm switch on the brake pad has been alarmed.

3. When the thickness of the brake pad is less than the minimum maintenance standard allowed by the vehicle manufacturer.

4. When the brake pads are contaminated by oil or grease.

If you encounter the above 4 situations, you can consider replacing the brake pads, the owner should pay attention to the matching with their own models when buying brake products, otherwise buy the brake pads that are not suitable for the car, both waste money and time, and cause trouble to yourself. In daily life, car owners also need to pay more attention to the maintenance of brake pads, and check them regularly to prevent problems before they occur.