The car is almost out of warranty, what do you generally need to check?

The first is the inspectionAntifreezeDifferent manufacturers have different antifreeze replacement cycles for vehicles, which is directly related to the brand grade of the vehicle. Antifreeze is generally divided into ordinary antifreeze and long-lasting antifreeze. The replacement cycle of ordinary antifreeze is 2 years, and the replacement cycle of long-term antifreeze can reach more than 5 years.

For a vehicle traveling 100,000 km, it is not enough to simply check the freezing point of antifreeze. Due to the long use of antifreeze, a large amount of scale and rust will appear in the tank. It is recommended to clean the inside of the tank and replace it with a new antifreeze.

Liquid. <>Then there's the inspectionBrake padsThe inspection of brake pads should be combined with three methods: touching, seeing and listening. We touch the brake disc with our hands. If the brake disc.

There are obvious unevenness or deep grooves, and then with the naked eye, you can see it clearly, then it means that the brake disc has been smoothed, and there is a dry film of metal sheet, which grinds the brake disc out of the groove. When used in conjunction with the brakes, the ears can hear a screeching sound of metal rubbing, indicating that the brake disc needs to be replaced immediately.

The car is to check the tires。Pay attention to the air pressure of your tires. If the inflation pressure is too high, the tire is prone to puncture; If the pressure is too low, the drag of the car will increase and the fuel consumption will increase accordingly.

Always check the tire tread pattern for sharp nails, stones, and broken glass to avoid puncturing the tire. If the surface pattern of the tire is worn to a certain extent, the tire needs to be replaced in time. Usually, when the tread is worn to just 2 mm, you will notice a specific mark on the tire.

Different brands of tires have different markings, but they are stated on the instructions. At this point, the tires should be replaced.

The other thing is to check the oil filter. It is used to clean the oil and prevent dirt particles from entering the oil circuit and thus into the bearing section. This prevents the engine oil from deteriorating prematurely due to solid impurities such as metal wear particles, soot or dust particles.

Car engines.

The so-called mainstream oil filter is used in the main oil flow between the oil pump and the lubricating part of the engine, which means that all the oil conveyed by the oil pump must pass through the filter to reach the lubrication site. part, so the lubrication area only accepts clean oil.

The oil level of engine oil, brake fluid, antifreeze, and whether the tire pressure is normal, whether the glass and doors are scratched, the fuel tank, and the bottom of the car to check whether there are scratches.

When the car is almost past its expiration date, it is generally necessary to check all the seats, glass, sealers, fuel tanks, engines, brakes, accelerators, steering wheel and oil seals of the body.

Check your car's tires, check your car's glass, check your car's engine, check your car's wipers, check your radar, and check your lights.

1. Check whether there is leakage in the sealing parts of the engine, gearbox, cooling system, air conditioning refrigerant system, etc., and if there is leakage, it can generally be treated free of charge. 2. Check the power generation of the generator, as well as the detection of air conditioning and refrigeration. When the high and low pressure of the compressor is abnormal, resulting in poor refrigeration effect, if it can be detected in time before the warranty period, it can reduce its subsequent maintenance costs.

3. Check the chassis suspension, such as whether there is oil leakage in shock absorption, whether the wheel bearing is abnormal, whether the ball joint of the steering machine tie rod and the ball joint of the rubber sleeve of the swing arm are loose, etc.

4. Use a special diagnostic computer to detect whether there are abnormal fault codes in the engine, gearbox, body control system, etc., and read the relevant data stream, and combine with the master's test run to comprehensively detect the performance of the whole car, such as whether the gearbox shifts smoothly, whether there is abnormal noise when the engine is running, and whether the acceleration performance is normal.

At present, the warranty period of most models is 3 years or 100,000 kilometers, and the warranty period of individual models is 5 years or 200,000 kilometers, and even longer. When the vehicle has not yet passed the warranty period, remember to take the time to go to the whole car to inspect it, and you also have a number of the condition of the whole car, and the abnormal oil leakage of the vehicle parts can also be overhauled for free.

If the warranty period is about to arrive, you can go to the 4S shop and tell the service staff: the vehicle is about to pass the warranty for a comprehensive inspection.

Generally, after such emphasis, the maintenance technician in the workshop will also help you check more seriously, because if there is a quality problem not long after the inspection, it is easy to cause customer dissatisfaction.

And when the technician of the 4S shop checks, you also have to be next to you, like some abnormalities encountered in the usual driving, to the technician to assist in the inspection. Don't worry about the items to be inspected, because the 4S store has a process link for a comprehensive inspection of the vehicle, which will be very comprehensive.

The lights of the vehicle, high and low beams, high and low beams must have a yellow light, left and right lights, brake lights, position lights, hazard warning lights, tire pressure, left and right rearview mirrors, vehicle tripods, and seat belts. These are all reviewed by the car year, as well as exhaust, vehicle operation status and so on.

Your question is a bit complicated, and it's hard to explain it all at once! This suggests that you go to the car circle of the car home, find the relevant car car circle of car friends, apply for ** entry, and then communicate with the real car owners, who are real car owners, they will answer your doubts and make you satisfied.

It is best to do a comprehensive inspection, and usually some small problems can be repaired as much as possible.

Hello! After the warranty period, the manufacturer does not claim for repair of the vehicle, no matter what the fault is, the owner needs to repair it at his own expense. Therefore, it is recommended that the vehicle go to the 4S shop for a comprehensive inspection before the warranty period, focusing on checking whether the engine and gearbox are leaking, as well as generators, air conditioning compressors, power steering pumps, sensors and actuators, ABS pumps and other components, because these parts are very expensive.

Secondly, focus on the inspection of various electrical appliances, such as light combination switches, air conditioning panels, instrument clusters, and airbags, which are also expensive. Try to replace all the parts in question within the warranty period, if you replace these parts at your own expense, it will bring a lot of repair costs to the car owner.

Generally, the four-s shop will do a full car inspection for the car before the insurance, and he will give you an invitation**If you say. Oh, he didn't give you an offer**? You can take the initiative to go to the four S store for a full car inspection!

Then check the problem, the corresponding problem, he will give you a replacement parts, of course, must be checked within the warranty period.

The warranty period of the car is also known as the warranty period, and the car manufacturer will generally give two conditions: time and mileage, whichever comes first. During the warranty period, the user uses it under the specified conditions of use, and the vehicle due to manufacturing, assembly and material quality problems caused by all kinds of faults or parts damage (loss of use function) by the manufacturer's authorized maintenance station inspection and confirmation are provided by the manufacturer to provide free repair or replacement of corresponding spare parts.

However, after the warranty period, if you repair it, you generally need to pay for it, but some manufacturers are afraid of being complained about and affecting their reputation, so they will help users deal with it for free.

If there is a problem with your car, as long as you can prove that the maintenance products used meet the requirements of the manufacturer, the 4S shop cannot refuse the warranty, and the law also stipulates that consumers can choose not to maintain in the 4S shop, so in general, if you don't want to worry about yourself, you want to drive the car to a place, you give me the maintenance, then I will drive away, in this way, you go to the 4S shop maintenance is no problem.

This situation in the automobile industry remembers that the domestic Hongqi Century Star, Tianjiao appeared this situation is particularly serious, at the beginning of the manufacturer and 4S shop are ignored, but later because of the girder fracture is particularly serious, and the car has more and more problems with this problem, and then the manufacturer unconditionally gave the replacement and subsidy during the loss (operating vehicles).

If only you have a car with this kind of failure, it is estimated that it is difficult for the manufacturer or 4S shop to pay, if this situation is more, the manufacturer will repair it for you free after coordination!

It is recommended that if only you have one in this situation, you can directly coordinate with the 4S store, it is best if it is feasible, but it is not feasible only at your own expense, and the problem will be solved as soon as possible to prevent the existence of potential safety hazards!

I bought the car and drove more than 30,000 kilometers, and now I find that there is a problem with the steering gear, and the 4S store says that I have passed the warranty period, what should I do.

The car was out of the warranty period, only to find that the left side of the door seam and the right side of the door seam were inconsistent.

The problem is that the left side of the door is parallel to the body, while the side door is not parallel and is sunk in.

What's wrong with you? Generally speaking, you have to pay for it yourself.

If the manufacturer can not deal with it or the result is not satisfied, then it can only be dealt with by the third party, and there are more third-party parties in China, but the only credible is only the car quality network, after all, the number of complaints and credibility are very high, and the state also attaches more importance to the complaints of the manufacturer on the car quality network will also be dealt with in a timely manner. So if you want to really solve the problem of the vehicle, you can only go to the car quality network.

When your car is about to expire, you must go to the 4S store as soon as possible to do a comprehensive inspection of your car. Generally, when the 4S store passes the warranty period, it will also contact the customer to come to the store to do the whole car inspection, one is to improve customer satisfaction, the other is to check out that there is a need to replace the parts, and there is also an output value, but when inspecting, it is best to be next to the car, and there is a number of their own car conditions. There is a suggestion, that is, if the condition of the car is relatively poor or the number of times the vehicle will be used, then it is recommended to buy an extended warranty, the cost does not need to be very expensive, and the follow-up can be replaced free of charge, which is very cost-effective.

When you are about to go out of insurance, go to the 4S store, let the after-sales staff check your car, see if there are any problems, and you can carry out free maintenance while you are still in the self-warranty to reduce the cost of maintaining your car in the future. In the general inspection, it is mainly to check whether there is leakage in the engine cooling system, air conditioning refrigerant system and other parts, and once this problem occurs, it can be dealt with free of charge. During the warranty period, problems can be found in time, and timely detection can reduce the maintenance costs of subsequent car maintenance, and the car must be a large expense.

During the warranty period, if there is a quality problem with the car, it can be repaired free of charge, including spare parts and labor costs. However, according to different models and 4S shops, there are many parts differences, some parts 4S shops can be repaired free of charge between the warranty period, but some are not, so when buying a car, you must ask which questions can be repaired for free between the warranty period. Try to replace all the parts in question during the warranty period, because if you pay for them, replacing them will bring a lot of repair costs, and some parts are very expensive.

Most of the cars on the market now have a warranty period of 5 years or 200,000 kilometers, or three years or 100,000 kilometers, but some cars have a longer warranty period, so when buying a car, you must pay attention to when your warranty period expires. We must learn to "pick wool" when there is no warranty period, carry out a whole car inspection, if it is found that the vehicle parts have oil leakage, it can be overhauled and dealt with free of charge.

Pay attention to check in advance before the expiration, pay attention to the quality of the car, pay attention not to listen to the bad car dealers, pay attention to do a comprehensive inspection, and pay attention to all the worn parts in the car must be replaced.

You can let the after-sales check first, if there is no problem with the quality of the car, you can go to the 4S store to do a comprehensive inspection, if it is no longer usable, it must be replaced in time.

I think that before the car is about to expire its warranty period, it should go to a 4S shop for a new maintenance and inspection. If something is about to happen, be sure to correct it as soon as possible.

First of all, you have to do an inspection, and try to go half a month in advance, so that you can have time to repair it if you encounter problems.

Summary. Dear, hello, I am happy to serve you, the solution to the quality problem after the warranty period of the car is as follows: negotiate with the dealer to make a claim.

According to Chapter 5 of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China "Regulations on the Responsibility for Repair, Replacement and Return of Household Automobile Products", the same fault can be repaired more than 5 times, and within the validity period of the three guarantees (the validity period of the three guarantees is 2 years or 50,000 kilometers, whichever comes first), if the car repair time exceeds 35 days, or the repair caused by the same product quality problem exceeds 5 times, the consumer can change the car.

Dear, hello, I am happy to serve you, the solution to the quality problem of the car warranty period is as follows: negotiate with the dealer to make a claim. According to Chapter 5 of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China "Regulations on the Responsibility for Repair, Replacement and Return of Household Automobile Products", the same fault repair can be replaced for more than 5 times, within the validity period of the three guarantees (the validity period of the three guarantees is 2 years or 50,000 kilometers, whichever comes first), if the repair time of the car is more than 35 days, or the repair caused by the same product quality problem is more than 5 times, the consumer can change the car with a number of cherry blossoms.

Extended information: The warranty period is the time of quality assurance, and the narrow understanding is the warranty period. The difference between the defect liability period and the engineering quality warranty period:

Warranty period: refers to the warranty period of the completed project by the contractor, and beyond this warranty period, there is no obligation to implement the warranty defect liability period: refers to the amount reserved by the contractor for the repair of quality defects after the first dismantling of the completed engineering products.