Why does Midea s air conditioner Leng Junxing look full of dust?

To clean the air conditioner filter, open the air conditioner panel, and there is a filter inside. There is a display button on the remote control to remove dust mites with a single press.

Dear, hello, I'm glad to answer for you: What does it mean that Midea air conditioner Leng Junxing shows that the dust is full? Answer: First, the air conditioner is not a fault, the dust display is the userized prompt setting of the air conditioner, the default machine work on the main control board for a total of 200 hours will appear this prompt, the source type volt to determine that the filter is not dirty or cleaned, press the remote control "digital display" button to reset and re-time, the manual also has this function introduction, users can refer to or understand before use.

2. How to solve the hail and carry the decision: 1First of all, the anti-power cut-off.

2.Disassemble the lower part of the cabinet; If it is hang-up, there are two dark handles (grooves) on both sides of the indoor unit, and you can lift the panel outward with a little force with both hands. If it is a cabinet machine, there are two plastic decorative caps on the plastic fence of the air inlet panel at the lower part of the machine, and the fixing bolts will be exposed when the decorative caps are removed, as long as the fixing bolts are removed.

3.Note that it is said that the air inlet filters are made of nanomaterials, so it is necessary to clean them properly, and use a soft brush to brush and shoot along the lines, and it is best not to wash with water. 4.

Find the screw position or some of them are through a clamp position to strengthen the shell, after disassembling the shell, you can see the dust filter, and clean the dust filter.

A dusty air conditioner is not a fault. The dust-filled display is a user-friendly prompt setting for Midea's air conditioner. By default, when the machine has been working for a total of 200 hours, the prompt will appear on the main control board.

After making sure that the filter is not soiled or cleaned, press the "Digital Display" button of the remote control to reset and re-time. This function is also introduced in the manual, so users can refer to or understand it before using it.

What to do if the beautiful air conditioner is full of dust?

First method:

1.First, reverse the power outage;

2.Disassemble the lower part of the cabinet; If you hang up, there are two hidden handles (grooves) on both sides of the indoor unit, and you can lift the panel slightly outward with both hands. In the case of cabinet units, there are two plastic decorative caps on the plastic fence of the air intake panel at the lower part of the machine.

Pull out the trim cap to reveal the retaining bolts, simply remove the retaining bolts.

3.Attention! It is said that the air intake filter is made of nano material and should be cleaned properly. It is best not to rinse with water, but to brush and pat along the side of the grain road with a soft brush.

4.Locate the screw location or some of them are fixed by the card location. After disassembling the shell, you can see the dust filter;

Take it off, wash it with clean water, dry it, and put it back.

The second method:

1.Remove the filter first, and then patiently spray the condenser (the one with white aluminum flakes) in the wall-mounted or cabinet air conditioner with the air conditioner's special cleaning agent until the water flowing out of the water pipe is clean (spray the cleaning agent once, then spray it with clean water twice, and so on).

2.Clean the filter to resolve the issue. If dust and light still appear after cleaning the filter, you can press the digital display key on the remote control of the Midea air conditioner to eliminate dust and light.

3.After doing the above steps, the air conditioner will still show that it is full of dust. At this time, you only need to move your finger lightly and press the "Digital Display" button of the remote control to reset, and the cumulative running time of the indoor fan will also be reset to zero. Retiming can be eliminated.

The dust is to remind the user to clean the filter. Many people don't pay attention to cleaning the filter, and they don't even know the consequences of not cleaning the filter for a long time.

First of all, it may affect the operation and cooling effect of the air conditioner, resulting in a decrease in air volume and poor cooling effect. Failure to clean the filter for a long time will allow such bacteria and fungi to breed inside the air conditioner, resulting in mildew and even peculiar smells, which will pollute the indoor air conditioning environment and affect the health of family members.

When cleaning the air filter, it should be rinsed under the tap and should not be cleaned with hot water above 40 to prevent shrinkage and deformation. After cleaning, shake off the water on the filter screen, insert it into the panel and install the air conditioner. That's it.

Midea Leng Junxing air conditioner shows that it is full of dust, usually because a large amount of dust and dirt has accumulated on the air conditioner filter, resulting in blockages and blockages. In this case, you need to perform the following troubleshooting and cleaning:

1.Turn off the power of the air conditioner: First of all, you should turn off the power of the air conditioner and pull out the plug to avoid the danger of electric shock during cleaning operations.

2.Remove the filter: Open the lid of the air conditioner or indoor unit, find the filter position, and easily twist the edge of the filter box to remove it.

3.Clean the filter: Clean the filter with a brush or tap.

If the dust is heavy, you can use a vacuum cleaner or a soft-bristled brush to clean it. It is important not to clean with hard or chemically contaminated Peihong cleaners to avoid damaging the filter network.

4.Install back to its original position: After the air conditioner filter is cleaned, install the filter as it is and close the air conditioner cover, then restore the power supply and turn on the machine normally.

It should be noted that you should also pay attention to your own safety during the cleaning process, especially when touching the inside of the air conditioner, you must remember not to pull and touch the electrical parts to avoid accidents.

Midea Leng Junxing air conditioner shows that the dust is full, which usually means that the filter or filter slider of the air conditioner needs to be cleaned or replaced. When the air conditioner's filter or filter is clogged or accumulates excessive dust, dirt, and impurities, the air conditioning system detects the status of the filter and displays it"Dusty"or similar tips.

To solve this problem, you can take the following steps:

Turn off the air conditioner: First, turn off the air conditioner and disconnect the power supply to ensure safe operation.

Clean the filter: Locate the filter or filter inside your air conditioner. They are usually located on the front or side panels of the air conditioner.

Remove the strainer or filter and clean it as directed in the instruction manual. You can use a vacuum cleaner or clean water to rinse the filter to remove dust and dirt. Make sure the filter is completely dry before putting it back in the air conditioner.

Replace the filter: If the screen or filter cannot be cleaned effectively or has been damaged, it is recommended to replace the filter with a new one. Follow the instructions provided in the manual to find the correct filter for your aircon model and replace it.

Turn the air conditioner back on: After the filter has been cleaned or replaced, put the filter or filter back into the air conditioner properly. Then reconnect the power, turn on the air conditioner, and reset the one on the display"Dusty"Prompt.

Please note that regular cleaning and maintenance of your aircon's strainer or filter is an important step in maintaining aircon performance and air quality. It is recommended to follow the instructions in the user manual for regular cleaning and change the filter in time as needed to ensure the normal operation of the air conditioner and clean air output. If the problem persists or further help is needed, please consult the after-sales service or professional maintenance personnel of Midea Leng Junxing Air Conditioner.

Turn the air conditioner off and unplug it.

Pick out the two card slot cards on the air conditioner shell with your hands, and Yunbi opens the outer cover.

Gently push the filter up with your hand and take it out.

Clean the filter with clean water or mild detergent. Be careful not to wash with hot water or a stiff brush to avoid damaging the filter.

Dry the filter and return it to its original position, insert it into the panel and install the air conditioner.

Turn on the empty celery adjustment, and quickly press the "Digital Display" button on the remote control to eliminate the dust full prompt.

It hasn't been cleaned for a long time.

Midea's air conditioner is full of dust, which is to remind users that too much dust has accumulated inside your air conditioner, and it is time for the air conditioner to be cleaned. Midea's air conditioner is full of dust and the lights are on, which does not mean that your air conditioner is faulty, but that the air conditioner filter is too dirty and should be cleaned.

Midea air conditioner dust full cleaning reason.

Midea air conditioner dust full treatment method method 1.

1. When cleaning the air conditioner filter, you need to cut off the power supply of the air conditioner;

2. When disassembling the wall-mounted air conditioning panel, there is a dark handle on both sides of the indoor unit, and the panel can be lifted with a little force with both hands, and the lower part of the cabinet needs to be disassembled when the panel of the cabinet is opened, and the air conditioning filter can be taken out and cleaned after the air conditioning panel is opened;

3. When cleaning the air conditioning filter, its cleaning method is very important, when using water to rinse, you can not directly rinse the dusty side, and at the same time, when cleaning, the scrubbing tools it uses should be cleaned with a soft brush, and when using a soft brush, it should be brushed along the lines while shooting.

4. After the air conditioning filter is cleaned, the moisture on the filter screen is shaken dry, and the filter screen is placed in a cool and dry place to dry. Once the filter has dried, it can be reinstalled back into the air conditioner.

Midea air conditioner dust full treatment method.

1. When cleaning the air conditioner, when removing the air conditioner filter for cleaning, the internal parts of the air conditioner should also be cleaned, and then the special cleaning agent for the air conditioner needs to be used. At this time, the special cleaning agent for air conditioning is evenly sprayed on the condenser of the air conditioner, after spraying the cleaning agent, close the air conditioning panel, let it stand for about 10 minutes, and then turn on the air conditioner to make the air conditioner run for 30 minutes, adjust the air volume and cooling capacity of the air conditioner to the maximum, and then the cleaned stains will be discharged out of the air conditioner with the flow of condensate from the air conditioner.

2. After cleaning the air conditioner, if the Midea air conditioner is still lit up, then you can press the digital display button on the remote control of the Midea air conditioner to eliminate the phenomenon of the dust lamp on, if the Midea air conditioner is still lit up, then you need to press the digital display button to reset, and at the same time, the running time of the indoor unit air conditioner will be cleared to zero, and the timing will be re-timed, and the phenomenon of the air conditioner full dust light can be eliminated.

Displaying the "Dusty" icon is a normal display state with the "Dusty" prompt function in Midea's air conditioner products. Prompt the user to clean the filter.

This function is designed to remind the user that the cumulative running time of the indoor fan has been greater than or equal to 200 hours since the last indoor fan cumulative operation time was cleared. “

When the "Dusty" icon is displayed, the user can decide whether to clean the filter screen of the indoor unit of the air conditioner according to the actual operating status of the indoor unit of the air conditioner, so as to reduce dust or other debris adsorbed on the filter screen, prevent the filter from clogging the perforation, and maintain the smooth air circulation of the indoor unit of the air conditioner.

How to clear the display of the "Dusty" icon: When the machine is turned on, you can clear the display of the "Dusty" icon by short-pressing the "Digital Display" button on the remote control (the key pressing time does not exceed 1 second), and at the same time, the cumulative running time of the indoor fan will be cleared.

The above method of clearing the display of the "Dust Full" icon has been written into the "Installation and Instruction Manual" of the air conditioner with this function.

Because the air conditioner is not cleaned for a long time, dust accumulates inside. There are also bacteria and germs. So you find a professional to wash the air conditioner in your home.