What s going on with the air conditioner showing full of dust? The air conditioner showed that it wa

There is too much dust on the filter screen of the indoor unit, so you can remove it in time. Tools needed: brush, laundry detergent, rag.

The specific steps are as follows: 1. Unplug the power plug of the air conditioner, disassemble and assemble household appliances, and disconnect the power supply no matter what electrical appliances. Even if you plug in the plug and don't turn on the power, you are afraid of accidents caused by leakage and static electricity, so be sure to turn off the power!

2. Lift both sides of the air conditioning panel upwards, open the air conditioning panel, and make a slight move. 3. When you see the filter inside, you can easily remove it with a gentle push up, and remove both filters. 4. Then prepare a soft brush, go to the bathroom and rinse it slowly with clean water, and turn on small water.

5. Brush the dust on the surface almost clean, take some laundry detergent, sprinkle the filter screen, and continue to clean with a brush. 6. Clear and clean, you can use a dry cloth to dry the water. The rag chooses the cloth that does not shed hair, otherwise it is not easy to clean up.

7. After the cleaning is completed, wait for the filter to dry and then install it in the original position of the air conditioner. 8. Finally, buckle the panel of the air conditioner back to its original position, pay attention to the correct position, and buckle all the buckles.

If you don't need to clean, use the remote control to operate, turn on the machine and press the "digital display" button on the air conditioner for about 6 seconds, release it, and press the "digital display" button again, and the dust can be eliminated when it is full.

The meaning of air conditioner dust generally refers to the user-friendly function set by the manufacturer for the air conditioner, which is to remind users that there is more accumulated dust on the air conditioner filter and needs to be cleaned up in time. Moreover, when the air conditioner is full of dust but is not cleaned in time, it will lead to a decrease in the air volume of the air conditioner, which will affect the cooling and warmth effect of the air conditioner.

Hello, glad to be able to your question. The reasons and solutions for the air conditioner to show full dust are as follows: 1. It is recommended to open the cover plate of the indoor unit to clean up the dust accumulation of the filter screen and the evaporator of the air conditioner after turning off the air conditioner.

Then press and hold the [Digital Display] button for six seconds, or the [Screen Display] button, and then press it again to turn off the dust full indicator light; 2. This is a cleaning reminder function designed by Midea air conditioning products, indicating that your air conditioning products have been used for 200 hours or more; 3. What needs to be paid attention to is that when cleaning the air conditioner filter, you can't directly rinse the dusty side when rinsing with water, and use a soft brush to brush and shoot along the lines. After the air conditioner filter is cleaned, the moisture on the filter is shaken dry, and then placed in a cool and dry place to dry, pay attention to not directly expose the filter to the sun. The appearance of "dusty" is mainly to remind users to clean the filter.

Many people do not pay attention to cleaning the filter, and even do not know the consequences of not cleaning the filter for a long time: first of all, it may affect the operation and refrigeration effect of the air conditioner, resulting in a reduction in air volume and poor refrigeration effect, and then Jingxun will affect the service life of the air conditioner, and secondly, the air inhaled by the air conditioner when working contains a certain amount of dust, mites, viruses and other harmful substances, some of them adhere to the filter screen, and if the filter is not cleaned for a long time, such bacteria and fungi will breed inside the air conditioner, resulting in mildew and even odor. It pollutes the indoor air-conditioning environment and affects the health of the family.

It is necessary to clean the dust accumulated on the return air filter screen of the indoor unit and eliminate the "full dust" display before it can be used again.

The air conditioner displays "full of dust" to remind the user that the return air filter needs to be cleaned, not the fault of the air conditioning unit. At this point, all you need to do is clean the filter and restore the air conditioner.

It is recommended to find the instruction manual that comes with the air conditioner manufacturer, and find the operation method to eliminate the dust full display.

1.Check the filter: First, check if the filter of your aircon is clean. The display of dust may be caused by a clogged filter or a build-up of dirt. Cleaning or replacing the filter regularly can solve this problem.

2.Air quality: There can be a lot of dust, dirt, and particulate matter in the air, causing the air conditioner's filter to become contaminated quickly. If the air quality of the environment is poor, the air conditioner may soon show that it is full again, even after cleaning the filter.

3.Air duct cleaning: In addition to the filter, dirt and dirt may accumulate inside the air duct. If the air duct is not cleaned for a long time, even if the filter is clean, the air conditioner will still show that it is full of dust. Regular cleaning of the air duct can solve this problem.

4.Fault sensor: The air conditioner may be equipped with a dust sensor inside to detect the degree of contamination of the filter. If the sensor is faulty or damaged, it may incorrectly show that it is full of dust. A professional technician is required to inspect and repair the faulty sensor.

5.User misunderstanding: Sometimes, users may misinterpret the information on the aircon's display and mistakenly believe that the aircon is showing as dusty. Read the instruction manual of the air conditioner to understand the meaning of various information on the display, and where to stare can help eliminate the user's misunderstanding.

Summary: If the air conditioner still shows full dust after dust removal, it may be caused by clogged filters, poor ambient air quality, incomplete air duct cleaning, faulty sensors, or user misunderstanding. Regular cleaning of filters and air ducts, attention to environmental hygiene, and inspection and repair of faulty sensors can solve this problem.

The display of "full of dust" indicates that the return air filter of the air conditioner is very dirty, and there is a lot of dust on it, resulting in a small air volume of the indoor unit of the air conditioner and a large pressure loss of the return air filter. At this time, you need to remove the return air filter of the indoor unit of the air conditioner and clean it, dry the water and then install it back.

The air conditioner filter can not be directly washed with water, nor can it be washed with dusty side, you can prepare a washing tool, use a soft brush to clean, it is best to brush along the lines, do not wash at will, will destroy the structure of the filter.

After installing the omen grip, turn on to see if it is running normally, and if there is no abnormal situation, you can use it with confidence. Generally, after running for a long time, the air conditioner will easily absorb dust, dirt, etc., which will not only affect the performance and effect of the air conditioner, but also increase energy consumption and even reduce the service life, so don't try to save trouble and not clean and maintain the air conditioner.

Maintenance before booting

Usually, household air conditioners are shut down and deactivated in September, and they are not turned on until May and June of the following year, and they are out of service for more than half a year. Therefore, before the air conditioner is turned on, a comprehensive "diagnosis" must be done to check whether there is a "problem" in the air conditioning equipment;

According to the results of the inventory, under the guidance of professional and technical personnel, do a good job of maintenance and cleaning, this maintenance and cleaning should be in place, including the shell of the outdoor unit and the indoor unit, the body code line, and the filter screen, and then start the trial operation to observe the refrigeration speed and effect.

After the air conditioner is turned on, the maintenance times during the air conditioner start-up process are determined by many factors such as environmental conditions, climatic conditions, number of hours of start-up, surrounding dust, air cleanliness, and whether the room is clean.

The reason why the air conditioner shows that it is full of dust is that there is too much dust inside.

The word dust is full on the electronic display screen of the air conditioner, which simply means that the filter screen of the air conditioner is too polluted and needs to be cleaned or replaced, otherwise it will affect the air purification effect, increase the operating load of the air conditioner, increase energy consumption, and reduce the life of the air conditioner. The air conditioner filter is an important part of the air conditioner used to filter dust, flowers, mountain powder, bacteria and other impurities in the air.

If you do not clean or replace it for a long time, the dust and bacteria accumulated on the filter will block the air passage and even affect the air purification effect. Generally speaking, air conditioning filters need to be cleaned or replaced regularly according to the use of the condition, depending on the frequency of use and the environment.

The reason why the air conditioner has dust

During the use of air conditioners, a large amount of dust is generated, which accumulates on the air conditioner's filters, evaporators, and heat exchangers, and is further sent back to the indoor air. In addition, over time, the dust prevention and cleaning function inside the air conditioner will gradually weaken, causing air to be sucked into the air conditioner, which will cause dust and plaque to increase inside the airframe.

In the winter when the indoor air is dry, the moisture in the air is reduced, resulting in dust in the air. In addition, in areas with serious outdoor environmental pollution, the degree of dust accumulation in the air conditioner will also be more serious. For example, there are many pollution sources in cities, such as motor vehicle exhaust and dust from construction sites, which will affect indoor air quality.

The air conditioner shows that the dust is full of the following solutions:

When the cumulative running time of the air conditioner is greater than 200 hours, the dust full light of the air conditioner will be on, reminding the air to adjust the dust and clean the filter. If the dirt in the air conditioner is not treated in time, it will affect the normal use of the air conditioner, and will increase the loss, so that the service life of the air conditioner will be greatly shortened.

Steps: 1. Turn off the power of the air conditioner.

When the air conditioner needs to be turned off, it is necessary to use the normal shutdown procedure and then unplug the outlet with energy.

2. Open the filter hatch cover of the air conditioner.

If you want to do it, you can refer to the manual if you are not familiar with it, the filter hatch cover of the cabinet machine is under the machine, and it should be pulled in front of you, and the hatch cover of the hang-up machine is pushed up; In addition, the louvers of the air inlet of the air conditioner need to pump the spring bolts on both sides to the middle at the same time.

3. Extract the filter located in the hatch.

Usually the filter screen of the cabinet machine is made of nylon mesh, and some ** air conditioners have activated carbon filter and nylon mesh filter at the same time, pay attention to distinguish.

4. Clean and dry the filter.

The nylon mesh filter is first washed off with clean water to remove a large amount of ash and dust, and then evenly sprayed on the surface of the filter with a cleaning agent diluted with water, waiting for 10 minutes, then brushing with a fine brush, and finally rinsing it with low-temperature water. The activated carbon filter cannot be washed with bad water, and it is often replaced directly, or it can be continued to be used after exposure to the sun.

5. Clean the evaporator.

The cleaning of the evaporator mainly depends on the degree of its contaminant coverage, if there is obvious oil and dust on the fins, it is necessary to use a special cleaning agent, and then use a high-pressure water gun to rinse it.

6. Put the dried filter back into the filter cabin.

The cabinet wall mount machine restores the power supply, ** air conditioner, you need to press the "reset" button on the LCD panel.