How to solve the shrinkage joints of the floor in summer?

First of all, you should pay attention to cleaning the floor regularly, and you should avoid water on the floor. You should also regularly wipe the dirt in the seams. Floors should also be disinfected. Floors should also be mopped with warm water.

It is better to repair, if it is within the warranty period, it can be repaired by the merchant for free. If the seam exceeds the standard, it is best to re-pave, after paving, it is better to have no gaps in the floor in summer. In daily life, we should avoid the air conditioner blowing directly on the floor, otherwise the floor will be more prone to shrinkage.

If this happens, then you can install a gauze curtain on the window to prevent direct sunlight, you can also steal the air conditioner at home, or turn on the electric fan to reduce the indoor temperature, and then you should also turn on the humidifier to make the indoor air moister, which can also avoid such a situation.

Wood flooring is a common flooring material, and when installing, it is necessary to reserve a certain expansion joint to prevent the wood floor from deforming due to changes in temperature and humidity. So, how to deal with the expansion joints of wooden floors? Here are some practical ways to do it:

1.The size of the expansion joint: Before installing the wooden floor, the size of the expansion joint of the wooden floor needs to be considered. Because the wood itself has a certain shrinkage and expansion, the size of the expansion joint needs to be appropriate, generally 1-2 mm.

2.Location of expansion joints: The location of expansion joints needs to be reasonable. As a rule, when installing a wooden floor along the long side of the interior, it is necessary to reserve an expansion joint between the two walls; If the length of the wooden floor is more than 6 meters, an additional expansion joint needs to be added in the middle.

3.Closure of expansion joints: Expansion joints need to be closed to ensure the aesthetics and safety of the wooden floor. There are many ways to close expansion joints, such as sealing them with wooden or aluminum strips, or filling them with a seam sealant.

4.Regular inspection: Expansion joints in wood-rock rotten floors need to be inspected and maintained regularly. If a crack or loosening of the expansion joint is found, it needs to be repaired in time. In general, it is appropriate to inspect the wooden floors once a year.

In short, reasonable reservation of expansion joints, correct treatment of expansion joints is an important measure to ensure the quality and service life of wood flooring, I hope these methods can help you better deal with expansion joints before Sakura.

The room temperature is high in summer, and once the paved floor enters the autumn and winter, it is affected by the physical factors of thermal expansion and contraction, which is easy to cause deformation, and even cracks that are more obvious than the front of the sky. The floor paved in winter will swell and bulge in summer. Therefore, in general, it is best to choose to pave the floor in spring and autumn.

If you have to choose the construction in summer, you must avoid the floor being exposed to the sun and ensure that the room temperature is lower than 30; The room temperature of winter construction should not be lower than 16, the northern city is dry in winter, and it is necessary to appropriately increase the indoor relative humidity and then pave the floor, while the southern city should take ventilation, dehumidification and other methods.

The specific method of paving is: adjust the direction of the floor, extend from the door to the room, the maximum span of the floor is 6 meters 8 meters, and a shrinkage joint must be left and a buckle must be used if this limit is exceeded; The expansion joints reserved at the wall root and the door strip interface should be greater than 8 mm; The splicing place is required to be continuous and uniform, and the residual glue should be cleaned up in time; The skirting board must be 12 mm thick, otherwise it is difficult to cover the shrinkage seam; The thickness of the aluminum alloy bead should be guaranteed to be more than 2 mm, and it is easy to warp and deform if it is too thin. In addition, it is best to maintain the floor once a month after moving in, which can not only prolong the service life of the floor, but also prevent moisture in the air from penetrating into the substrate and causing the floor to deform.

You can get it for free

How to deal with large gaps in wooden floors:

1. The gap of the wooden floor is relatively large, and we can fill the gap with glass glue.

2. If the gap is within five millimeters, you can use bakelite powder and water to stir evenly, fill the gap completely, and then wait for one night before use.

3. Or you can add sawdust to the water-based putty and wait until it is stirred evenly before filling.

4. You can also fill it with thin wooden strips, so that the aesthetics of the interior will not be affected to a certain extent.

5. You can also go to the hardware store to buy wood floor caulking paste for repair, so that the gap can be filled.

How to maintain the floor

1. If the floor is laminate flooring, it is very simple to maintain. It is to clean the floor when it is time to clean. However, it should not be rinsed with water, as this will cause water to enter the floor, which will penetrate into the interior of the floor and the floor will be damaged.

It should not be cleaned with a neutral detergent, and the floor should not be exposed to sunlight or moisture. And keep the room ventilated at all times, and the temperature in the room should be kept within the right conditions.

2. If it is a solid wood floor, it should be used after the installation is completed, and the ground should be kept clean and dry, which will make the floor use for a long time. And when installing, be sure to do the corresponding moisture-proof treatment. It is necessary to wax regularly, so that the finish of the floor is very good, and it will not be exposed to the sun.

1. If the gap is too large, you can fill the gap with glass glue, but the aesthetics depends on your personal feeling, or use repair wax to repair, specifically adjust the repair wax to a similar color to the floor, and then pour it into the gap.

2. If the gap is too large and has 5 mm, it is best to buy bakelite powder, stir it evenly, brush it into the crack, and wait for a night to probably step on it again. In fact, this kind of half-centimeter opening situation is very serious, if the economy allows, it is recommended to replace the floor directly, which is more secure.

Wood flooring is a very beautiful flooring material, but due to the limitations of its material, shrinkage often occurs, which leads to gaps or gaps in the resistance of wood flooring. This not only affects the aesthetics of the floor, but also hinders daily movements. However, there are some better solutions to this problem.

1.Humidification.

In a dry environment, wood tends to shrink, so when there are gaps in the wood floor, the first thing to consider is humidification. You can use a humidifier or other appropriate tool to increase the humidity in the room, which can promote the expansion of the wood and thus fill the gaps that have already appeared.

2.Use gap filler.

If the gaps in the wooden floor are large, then caulking adhesive can be used to solve this problem. Caulk is a glue specially used to fill gaps in wood, and its high adhesion allows it to bond the wood firmly and restore the floor to its perfect condition.

3.Use touch-up treatment.

If the gaps in the wooden floor are small, then you can choose to use touch-up paint to deal with them. Apply paint of the same color as the wood floor to the gaps, which can fill the gaps and solve the problem of floor gaps without destroying the overall aesthetics.

4.Replace wooden floors.

If the gaps in the wooden floor are serious and cannot be solved by the usual treatment, then you can consider replacing the wooden floor. Replacing the new wooden floor can effectively solve the problem of gaps in the floor, and at the same time can also improve the overall decoration effect and service life of the floor.

In short, in the face of the problem of gaps caused by shrinkage of wood flooring, we need to start with humidification, the use of gap filler, touch-up paint treatment and replacement of wood flooring. The final method chosen needs to be determined according to the actual situation, so as to achieve a perfect restoration of the floor. At the same time, in the ordinary use process, we should also pay attention to strengthening the maintenance of the wooden floor to avoid the shrinkage of the floor.

The main function of the floor expansion joint is that the floor is prone to expansion and contraction because of the changes in temperature and humidity of the environment, and the retention of the expansion joint can make the floor adapt to the changes in the environment, thereby reducing the warping and cracking of the floor. So how to deal with floor expansion joints? The following will be introduced from the following aspects.

1. Choose the right caulking material.

The filling of floor expansion joints needs to choose special filling materials, generally including soft rubber strips, silicone glue, PU foam materials, etc., which have a certain degree of relaxation and elasticity and can meet the requirements of floor expansion and contraction. Therefore, the choice of caulking material is very important, and you can choose the most suitable caulking material to know more professional product information.

2. Clean the expansion joints.

Before filling the expansion joint, it is necessary to thoroughly clean the dust, debris and other impurities in the expansion joint to ensure that the bottom of the expansion joint can be tightly attached to the ground and enhance the adhesion of the joint filling material. The method is to use a powerful vacuum cleaner or scraper and other tools to clean the impurities in the expansion joint, so that the next step is to deal with it.

3. Fill the expansion joints correctly.

When dealing with expansion joints, they need to be filled according to the requirements of the specification. First of all, it is necessary to determine the caulking depth, covering area, width, etc. Then, according to the relevant steps, the caulking material is put into the expansion joint, which is completely filled and uniform.

In the process of filling, a special adhesive strip auxiliary tool can be used to help fit, and at the same time, the caulking material should be compacted to ensure that the caulking is fully compacted.

4. Maintain expansion joints.

After the expansion joint treatment is completed, it needs to be maintained in time, check whether the caulking material has changed, and deal with it in time once there is a problem. Common methods of maintaining expansion joints include regular inspections, regular cleaning, etc., and the use of silicone sealants to enhance the durability and waterproofness of expansion joints.

In short, the treatment of floor expansion joints needs to be scientific and reasonable, and be dealt with in accordance with the requirements of the specification. The selection of appropriate filling materials, cleaning expansion joints, etc. are all problems that need to be paid attention to in the treatment process, and only correct operation and reasonable maintenance can effectively extend the service life of the floor and reduce the occurrence of many problems.

1. The reason for the large gap of the solid wood floor: the gap of the solid wood floor is too large mainly because the water content of the wooden floor is large when the wooden floor is installed, and then gradually shrinks, especially during the heating period in winter, the water content is greatly reduced, which will cause the solid wood floor to become larger.

2. The installation method is wrong: If the installation method of the wooden floor is not correct, it will also lead to cracks in the floor, and it is best to ask the master to reinstall it here.

3. What should I do if the gap between the solid wood floor is large, if the glass can't stand it, you can fill the glass glue, whether it is beautiful depends on how I feel. If the gap is about 5mm thick, it is best to buy bakelite powder, stir it, brush it into the crack, and then wait for the left and right to step on it again overnight.

4. How to maintain the wooden floor: laminate flooring. The maintenance of laminate flooring is relatively simple, only need to keep the floor clean when cleaning, can not use a large amount of water to rinse, to avoid local immersion of the floor, it is best to use neutral detergent to clean, avoid exposure to the sun, moisture, etc., at the same time, keep indoor ventilation, the temperature is appropriate, help to prolong the life of laminate flooring.

5. If the solid wood floor is installed and used improperly, there will be quality problems, the solid wood floor needs to keep the ground dry and clean during maintenance, and the corresponding moisture-proof treatment needs to be done when laying, and it needs to be buried regularly to maintain the finish, and should avoid sun exposure, hand thermal expansion and contraction have a greater impact, and it is necessary to pay attention to the temperature control, otherwise it is easy to deform and crack.

6. Solid wood parquet: The maintenance of solid wood parquet is much simpler than that of solid wood flooring, it is necessary to keep it dry and clean when cleaning, it is best to use neutral detergents to mop the floor, the curtains should be drawn to avoid sun exposure, if there are stains on the ground, it should be wiped with a rag dipped in warm water in time.