-
1. What are the tricks for wet floor tiles?
1. Mop the floor with a dry rag.
When the floor tiles are wet, you need to wipe them frequently with a dry mop or dry rag to mop the moisture on the floor tiles.
2. Turn on the air conditioner or heater.
If the environment in the room is humid, you can turn on the small solar heater or turn on the air conditioner to increase the temperature in the room, and the water content in the air will increase after the temperature rises, so the water will evaporate in the air.
3. Light a candle.
In a tiled bedroom or living room, burn aromatherapy as an energy-efficient and effective way to dry the air while also removing musty odors from the room.
4. Control the switch window.
From March to May every year, there are more days back to the south and the rainy season, so the ground will be more humid, so try to open the windows as little as possible during this time to avoid moisture entering the room, and you can open the windows for ventilation in the sunny afternoon, because the humidity in the air is low at this time, so you can ventilate for half an hour to an hour.
Second, what are the reasons for the moisture-proof floor tiles?
1. There is no moisture-proof layer on the ground when decorating the house.
2. It may be due to the heavy moisture under the floor, especially if the floor heating is installed in the north, the floor is more likely to be wet.
3. When spring comes, the temperature in the air suddenly rises, and when the hot air meets the cold floor, it will condense moisture, and the floor will be damp at this time.
4. When the weather is rainy for several days, the air is relatively humid, and there are more water molecules, plus the water brought into the room by people in and out, the floor of the room will be moisture-proof.
-
Dehumidify with an air conditioner. Most air conditioners now have this feature. Activating the dehumidification function of the air conditioner can effectively solve the problem of dampness in the room during rainy hours, and can also form all-round protection for "moisture-afraid" household appliances such as TVs and computers.
2 When the computer or TV at home is not in use, it is best to make a protective cover, which can effectively prevent the rear of the appliance from coming into contact with moist air. 3 If the outside air is too humid, remember to close the doors and windows; If the house is too humid, to ensure that the room is ventilated, you can use air conditioners and fans to dehumidify. 4 If the walls are covered with "sweat", it is recommended to buy a dehumidifier to dehumidify.
5. In long-term humid areas, you can use charcoal in the room or bamboo charcoal under the indoor floor, which has a good effect on the balance of room humidity and the prevention of dust and air purification. 6 Do not keep anything indoors (flowers, birds, fish, insects, pets of all kinds), especially fish and plants of all kinds (including cacti). Put some quicklime (mixed with some sand) in a damp dead corner.
7 When the weather is good and the sun is sufficient, open the windows for ventilation, and take out the quilt and clothes to dry. If you ventilate the room, it won't be damp...
-
The carpet in the home has always been dry and damp, which is related to the indoor humidity.
You can put a dehumidifier or you can choose to lay a carpet. For example, seaweed fiber carpets are natural and suitable for humid environments.
-
Workaround:
1. Check whether the fungus is caused by the bricks not tight enough, and release the odor when wet, in this case, fungicidal agents can be added to the water of mopping the floor, and try to sprinkle less water and ventilate more.
2. Use 84 disinfectant to mop the floor, pay attention to the separation of the mop in the living room and bedroom and the mop in the kitchen, because the kitchen is oily and not easy to remove.
3. Place green plants or bamboo charcoal indoors to absorb peculiar smells, and add appropriate vinegar to the clean water on the mopping floor to disinfect and sterilize.
Causes of the smell of tiles when exposed to water:
1. Under normal circumstances, the floor tiles have just been laid at home, and a very unpleasant fishy smell will be produced after mopping the floor, but this odor will disappear by itself after a while.
2. There are also many cases of odor of ceramic bricks, especially the black-hearted and yellow-hearted ceramic bricks fired in a reducing atmosphere, which will produce sulfides. Hydrogen sulfide, sulfur dioxide, these gases are placed in the micropores of ceramic tiles, and they will release odors. However, for ceramic tiles with low water absorption, the smell is relatively small.
3. If the odor on the floor tiles is emitted for a long time, then it may be because the bricks are not tight enough, which is caused by the fungus that breeds.
-
General situation: 1. Generally, there will be a fishy smell after the freshly laid floor tiles are dragged down, and they will disappear naturally after a long time. 2. When mopping the floor, you can add some detergent, toilet water, wind oil essence or lemonade to remove the odor.
3. After mopping the floor, be sure to wash the mop thoroughly and put it in a ventilated place to dry naturally to prevent mold breeding. Special circumstances: 1. If it is a peculiar smell for a long time, it is likely to be caused by the lack of density of the bricks and the growth of fungi.
2. Add fungicides to the water for mopping the floor, try to sprinkle less water and ventilate more. 3. Use 84 disinfectant to clean, but it should be noted that it is best to separate the mop from the kitchen in the living room and bedroom, because there is usually oil stains in the kitchen, which is not conducive to a complete solution. 4. Place some green plants or bamboo charcoal indoors to absorb odors, and add an appropriate amount of vinegar to the clean water on the mopping floor to disinfect and sterilize.
-
1. Keep the windows open for ventilation; Generally, the water droplets appear when the floor tiles return to moisture, basically because the weather is too humid, at this time, it is necessary to keep the windows open for ventilation to ensure that the room has been in a state of ventilation, so that the indoor moisture flows outward, which can solve the situation of the floor tiles returning to moisture to a certain extent.
2. quicklime; Quicklime can be used to remove moisture from the room, thus reducing the chance of re-moisture on the floor tiles. The specific method is to buy 10 15 kg of quicklime, put it in a container, cover it, put it under the bed or in the corner of the house, and when the tiles are damp, you can close the doors and windows to open the container, so that the quicklime can absorb the moisture in the air, which is conducive to ensuring indoor dryness.
3. Silicone waterproofing agent; Brick walls that are damp and water-permeable should be coated with silicone water repellent to prevent moisture from entering and make the wall breathable. If possible, the wall can be sprayed with moisture-proof liquid to form a moisture-proof layer. The effect of this method is very good, it can be said to be once and for all, but the disadvantage is that the cost of investment is large.
-
If you say that the floor tiles are in the bathroom, in the absence of obvious pipe leakage, this sand wetness should be caused by water seepage in the cracks of the floor tiles. As we all know, tile paving Heng Hongzhao must leave gaps, what caulk, beauty caulk, etc. can not prevent water from seeping into the mortar layer. Since we can't stop it by any means, then don't stop it, let's just let the seepage accumulate and then drain it away.
The floor drain on the surface of the floor tiles is called primary drainage, and the stagnant water below the floor tiles is then drained away and called secondary drainage. So, it doesn't matter until there is no impact. However, if it is not in the bathroom area, such as the living room, bedroom, etc., below the floor tiles, you should be careful.
If it weren't for the leaking water pipes, it was likely that the dark water in the surrounding bathrooms was quietly flowing out. You check whether the bathroom door, the opposite corridor or the bedroom and other wall foot positions have peeling, bulging, yellowing and blackening, etc., if there is a rent, it is the bathroom level leakage. If it is a balcony, it is also normal, as long as the waterproofing is done well and does not cause an impact, there is no problem.
Balconies and kitchens are not like bathrooms, generally the ground is waterless, and water such as rainwater, cleaning, etc. is also temporary, and will not have too much water like the bathroom. Hope it can help you, please like... to understand different family waterproof and leakage control knowledge
First of all, we have to see what seeps in, if it is rust, then it is necessary to wash it with 100:1 dilute hydrochloric acid or oxalic acid, if it is oil or dust and other stains, you can use dish soap, all-purpose water, etc. to clean, if you want to remove the scratch, the difficulty is very high, it is recommended not to do any grinding attempt, because it is definitely worth the loss, after the scratch is cleaned, polish and polish with special polishing wax for stone, and try to reduce this trace. >>>More
If it rains lightly, it's fine, but if it rains heavily, it's best to cover it with a tarpaulin to prevent rainwater from seeping in, causing the loss of mortar below, which will affect the floor tiles. >>>More
There are several ways to do this.
1. If you are not afraid of trouble and waste of money, you can knock out the floor tiles and replace them with good-looking ones. It's a big deal. >>>More
If it's a single piece of slurry, you can remove the floor tiles and do it again with Dasha cement. But it has to be professional.
You can choose to pour mud around the empty floor tiles, and then you can also switch to a special cutter to leave a one-centimetre shockproof joint. After cutting, you can use a hammer to gently tap to clean up the garbage, and then use the same size and amount of cement mortar mix of floor tiles. In general, it is possible to lay the corners of the wall with glass suction without affecting the adjacent tiles.