How much is a reasonable piece of house decoration with radiators, and the radiators do not change d

According to different materials, ** is also different, if the use of a new cast iron radiator, 130 square meters of living room is generally a full set of decoration is about 4000 yuan, the effect is very good. At the same time, the radiator installation position is generally at:

Living room: Choose near the sundeck, which is conducive to the convection flow of air. Remember not to be too far away from the main heating pipe, but within 2 to 3 meters so that the water flow resistance is not too large and does not affect the heat dissipation effect of the heating.

Restaurant: The radiator and installation location of the restaurant are generally selected on the wall near the dining table to keep the restaurant area comfortable and warm, and at the same time, it can create a beautiful dining environment in winter.

Bedroom: The bedroom radiator should be installed at a distance from the bed, because the radiator is too hot to roast people and sleep is not very good, try to install it at the foot position, and also do not be too far away from the supervisor to grasp the distance.

Study: The study is the area where radiators need to be installed most in the home, comfortable heating in winter, constant temperature and no noise, which is convenient for the owner to study carefully, and completely avoids the noise interference of air conditioning and heating. The installation position of the study radiator is generally placed on the wall behind the door, under the window wall or under the desk.

Bathroom: Generally, the toilet radiator is generally placed above the toilet or close to the bathing place.

You can refer to:

The old-fashioned radiator changes direction and position, and it costs about 200 yuan for wages. This work can't be done alone, and there must be someone at home who can carry the radiator to cooperate.

It depends on how you move it, whether you need to add materials, and it is generally about 100-200 for pure labor.

No, since it is mobile, it is enough to truncate or lengthen the PPR pipe. Why replace them all, this can be done with a hot melt machine, it's very simple.

1. When the decoration and heating transformation is just to move the position of the two sets of radiators, the connecting pipeline can be extended, and there is no need to replace all the PPR pipes.

2. In one of the following circumstances, it is necessary to change all the tubes;

a) The original pipeline design is unreasonable or the appearance is not beautiful, which affects the decoration effect and needs to change the original direction;

b) The use proves that the pipe diameter design is unreasonable, affecting the heating effect, and the pipe diameter needs to be adjusted;

c) The quality of the original pipe diameter is not good, or the corrosion and aging are serious.

Think about it from two angles.

If you want to make the water flow effect better, you can replace the 6 pipes with 1 inch ones, so that the pipes are thicker, and the heating effect will be better.

If you just want to change a few pieces of heater and move the position, then you can not change the PPR pipe welding is very easy, and even if the landlord you have a hot melt machine, you can heat melt yourself It's as simple as that.

How many sets of radiators are there? There's no need to swap them all out. Is there a leak in the original pipes?

OK.

1. When is the right time for the radiator to be displaced?

It is best for central heating users to retrofit radiators in the non-heating season. There are two reasons for this:

1. Central heating is a set of systems, and the change of one household will affect the whole system. The heating valve is self-controlled, and the renovation time can be arranged by yourself, otherwise it must be arranged before the heating period, so as not to affect the normal heating of neighbors.

2. Now most of the radiators are customized, and there is a certain production cycle, if you don't plan in advance, it will affect the construction period because the radiators are not in place, causing certain economic losses to users. Therefore, whether it is a new house or a second-hand house, if you want to renovate the heating, you must arrange it in advance, and try to rush before the heating period.

2. Position measurement.

When the radiator is replaced, the length of the radiator and the area of the new installation position should be measured in advance, so as to avoid the re-installation due to the inappropriate area and the inability to install.

3. It does not affect other users.

In some communities, the heating system is in series mode, and if one or a group of radiators is renovated, the entire building or all the radiators in the home will be turned off. Therefore, before moving their own radiators, users should first understand the operation lines and principles of the whole building and their own thermal circulation system, and start to renovate them, so as not to affect all of them because of local conditions.

Fourth, the connection location.

The part where the radiator and the pipe are connected* are prone to water leakage, water seepage, bursting and other problems. Therefore, when disassembling, special attention should be paid to the connection to avoid damaging the interface during the disassembly process, and to ensure that the pipeline will not be bent, so as not to cause inability to install. When installing, it is necessary to check whether the rubber sealing ring is installed at the pipe connection to prevent water leakage and bring trouble to future use.

Fifth, do a good job of anti-corrosion.

When disassembling the radiator, you should check and understand the anti-corrosion effect of the inner wall of the radiator, the original heating system is sealed, after disassembly, the inner wall is in contact with the air, which increases the corrosiveness of oxygen to the inner wall, if the radiator has trachoma, and then after disassembly, it is likely that there will be a risk of water leakage. Therefore, after the radiator is removed, it is necessary to check whether there is trachoma and cracks, and if there is a problem, it can no longer be used.

Sixth, the selection of the installation location of the radiator.

There are three aspects to consider when choosing the location of the radiator installation: first, safety, such as the hanging radiator is best placed on the load-bearing wall; The second is functional, such as the radiator placed under the window can prevent cold radiation and cold air circulation, and when people are close to the cold window, they will not obviously feel the invasion of cold air; There are also furniture factors to consider, such as not fitting radiators near furniture that is afraid of being heated for long periods of time.

7. Suppression test.

The overall heating system includes valves, pipes, radiators, interfaces and other parts. After disassembly and reinstallation, the whole system needs to be tested for pressure, and the test proves that there is no leakage before it can be put into use. If there is no pressure test, it will be connected to the original pipeline without permission, once the pressure in the pipeline is too large in use, the connection point or valve can not withstand the pressure, and the light one will leak, and the serious one will burst, threatening the user's life and property safety.

Therefore, suppression testing is essential.

Yes, but it will be more troublesome and may affect the decoration of the home.

Sanyou electrical appliances will answer for you: yes, you can change the heating to a small size or change the location, specifically according to the actual situation, there is no way to give a more accurate transformation plan on the spot, you can find a plumber to consult, it's not a thing!

Changing heating in decoration is a professional job, which must be done by professional plumbing technicians, which seems simple, but is actually very complicated; And the responsibility is great;

Including: design of the number of heating sheets, positioning, blanking, slotting, pipe connection or welding, test hanging radiators, pressure test, completion;

The heating is redirected according to the charge for each place, not the pipe; need to reconfigure fittings, valves, etc.; Generally, the company is 150-300 yuan a piece;

Heating displacement needs to go to the pipe, the general heating pipe single pipe slotted PPR pipe, each linear meter in 60-80 yuan extended meters, low unreliable, high is a bit outrageous; The grooving must be cut and then chiseled, the depth is appropriate, and then every fixed pipe clamp, fill the groove; Finally, the pressure test is carried out to ensure that there is no problem in delivery;

In principle, regular decoration companies are not allowed to dismantle and change the mobile heating without permission; It must be done by the property or housing management department, because the heating system is connected in series, and the problem of one household may involve the interests of multi-household heating, and it is labor-intensive and material resources to repair leakage or poor heating.

It is impossible to estimate that the current materials are very different, and it is recommended to go to the building materials market to see.

Are you sure 1.8 meters a piece?

The indoor heating load is about 65W square meters without external wall insulation. If there is insulation, it should be in 45w square meters. Seventy square meters multiplied by your heating load per square meter w is the heat supply required by your home, and you can see how much heat your twenty-six pieces can provide you to know whether it is super or not.

Normally! Housing demolition compensation needs to be evaluated and priced! Theoretically, the installed must be compensated more than the uninstalled!

But sometimes it will be compensated according to the average price per square meter after doing a general assessment as said upstairs! However, this will obviously be detrimental to some users! Because the decoration of a house, the value of heating equipment and so on will definitely not be the same!

Therefore, if you have any objections, you can raise them with the demolition department!

Of course not.. It doesn't matter how your house is. It's all squared.

Private reform is absolutely not feasible. If the radiator at home is broken, of course, it can be replaced and repaired. However, if you install radiators in your home without permission and your own and other residents' homes are not hot, you will be responsible for maintaining the affected home radiators.

If you install radiators in a space that has been renovated without permission, you may face forced removal by law enforcement or pay the gas company the difference in heating bills.

No, just replacing a new radiator is not a private change, and it is okay to replace high-quality radiators such as Ruihuate radiators as the top ten radiator brands. However, if it is changed to underfloor heating or the installation of booster pumps, it is considered a private change. If the room temperature is not up to standard, the heating company may shirk it, and there will be certain hidden dangers.

The connection between the radiator and the pipe and the radiator is the most likely to have problems, so when the radiator moves, it is necessary to deal with these connections. Specifically, during construction, it is necessary to check whether the rubber sealing ring is installed at the pipe connection, which is a necessary process to prevent water leakage. The sealing work must be done well, and if there is water leakage in the future, it will affect the normal heating effect, and the trouble will be greater.

Comes with not strong, not needed, radiators are relatively thin, and not their favorite style, it is recommended to change it, there is not much money, radiators are generally more than a hundred, better more expensive, decoration once to get good, save in case of water leakage will be troublesome. It is recommended to go to some large building materials stores and buy some brands with good reputation.

Replacing the radiator is not considered a private change.