The corners of the range hood can easily hit the head, how can you avoid it?

First, at the beginning of installation, the installation height of the range hood can be determined according to the height of the wall and the height of the person; The second is that it has been installed, and you can buy a few anti-collision corners and install them on the corners of the range hood.

First of all, you can try to install it as high as possible, and secondly, you can buy some anti-collision corners to stick to the corners of the range hood, so that you can avoid hitting your head and being injured.

When installing the range hood, try to put it in a little bit. Make the tilt angle of the range hood just flush with the top of the head, and leave a little less distance in the middle, so that you don't hit your head.

If you can raise the position of the range hood, you should try to raise it as much as possible, otherwise you can only install anti-collision pads on the corners of the range hood to avoid it.

First of all, it can be installed a little higher; secondly, anti-collision strips can be installed at the four corners of the range hood; Another thing is to be careful not to get up too straight when cooking, so as to avoid touching the range hood.

You can wrap that kind of soft stuff on the corners of the range hood, so that even if you hit your head, it won't hurt, and this kind of thing is sold online quite cheaply.

Change to a range hood. The top-mounted range hood can be replaced with a European-style range hood.

It can be replaced with a built-in range hood, which is basically embedded now, with enough suction power, easy to clean, and will not reach the head.

I think you can ask a designer to redesign the position of the range hood, you can move it up a little bit so that it doesn't hit the head.

First of all, you should raise the position of the range hood, or change the hood cover, which can solve the problem of meeting.

You can consider an integrated stove, which has a better smoke absorption effect and will not hit your head.

There are the following differences between an integrated stove and a range hood:

1. The absorption methods of oil smoke are different.

The net absorption rate of traditional range hood is 40-60%. The smoke absorption rate of the integrated environmental protection stove is more than 90%, the side suction or ring suction is used in the lower row of the stove cavity, the smoking hole is on the back side of the stove cavity, the smoke is sucked away by the smoke machine as soon as it is formed, it belongs to the zero distance to suck away the fume, the fume does not have time to diffuse, it is quickly and completely discharged, and there is no choking smell even if the fried pepper is fried. Completely eliminate the harmful substances after natural gas combustion.

2. The practicality of the kitchen is different.

The traditional smoke machine is hung above the head, and the higher it is hung, the worse the smoke absorption effect is; If it is hung too low, it will give people a sense of depression that is breathless, and sometimes it will hit the head, which cannot solve the contradiction between beauty and practicality. The upper part of the integrated environmental protection stove is smokeless, and it can be done on the cabinet or not.

3. The impact on human health is different.

The traditional smoke machine has a low suction rate and serious diffusion of oil smoke, which often causes people to suffer from "oil smoke syndrome", and the integrated environmental protection stove is sucked away by "zero distance" at the same time as the oil smoke is formed, and the human body cannot be exposed to oil smoke at all, so it reduces the occurrence of such diseases.

4. The security system is different.

1) The lower discharge of the stove cavity is used by side suction to prevent children from being scalded by hot soup or boiling water. Prevent the smoke machine from bumping and injuring people when the machine falls.

2) Integrated eco-friendly stove with leakage protector. The smoke machine, stove and disinfection cabinet share a set of humanized intelligent control system, in case of accidents, automatically cut off the gas source to prevent danger.

3) Disinfection cabinet door interlocking device (stop disinfection when the cabinet door is opened).

5. The noise is different.

The use of ultra-low noise technology and silent air duct design eliminates the noise source placed on the human head, and places the noise source in the lowest part of the production hood, so that its noise is significantly lower than that of the current traditional smoke machine.

6. The indoor environment is different.

In a relatively short period of time, the walls and furniture of the kitchen and the hall gradually begin to change color and become old, and the kitchen and hall with integrated environmental protection stove are still as good as new after more than a year, and can be renovated less once in a few years.

7. The difficulty of cleaning is different.

The traditional smoke machine is upside down, the smoking hole is under the smoke machine, the water flows down, the oil drips down, the oil net needs to be wiped frequently, and it must be cleaned once in one or two years on average, otherwise the oil stain will stick to the fan, not only the noise is like thunder, but also the effect of cherry smoke is greatly reduced, which is annoying. The smoking holes of the integrated eco-friendly stove are generally located on the rear side, and the unique tapered design and inner surface coating treatment allow the waste oil to flow into the oil collection box at the lower part of the body. It does not need to be cleaned frequently, saving manpower and material resources.

Range hood meeting problems and solutions.

Range hood meeting is a problem that needs to be paid attention to, and if it is not dealt with in time, it may cause the range hood to fail to function normally or produce noisy sounds, which will cause muffled damage to the family. To solve this problem, we need to focus on the following three aspects:

Check and balance the center of gravity of the range hood.

When installing a range hood, some parts need to be disassembled. If disassembled in the wrong way, it can cause an imbalance in the center of gravity of the range hood, which can lead to bump problems. Therefore, we need to ensure that the center of gravity of the range hood is balanced under reasonable installation conditions to avoid such problems.

Check the suction power next to the range hood stove and clean the smoke holes.

If the pan is too low, the suction power of the range hood may not be able to absorb the fumes generated in the pan, resulting in a bump. Therefore, we need to adjust the height of the pot so that the range hood can better absorb the fume. At the same time, it is also necessary to clean the fume holes regularly to avoid the accumulation of fumes in the fume holes and block the fume passage.

Timely repair of the components of the range hood.

A range hood is made up of multiple parts, and if one part is damaged, it may affect the normal operation of the range hood, resulting in a meeting problem. Therefore, we need to regularly inspect and repair the components of the range hood to ensure that it is operating properly.

In short, the problem of range hood meeting can be solved by balancing the center of gravity, cleaning the smoke holes, and repairing the parts in a timely manner. Only by keeping the range hood running properly can the safety of the home be ensured.

If your head hits the hood, the first thing you should do is stop all activity, calm down, and check your head and neck for injuries. If the injury isn't serious, ice or ointment can be tried to relieve the pain. If the pain or discomfort is severe, seek medical attention immediately.

In addition, in order to avoid the recurrence of similar accidents, the following practices can be considered:

1.Clean the hood regularly to avoid excessive grease accumulation, which can cause the hood to sag or loosen.

2.When using the range hood for a long time, care should be taken to avoid approaching or touching the range hood.

3.When installing the range hood, products with reliable quality should be selected, and operated in strict accordance with the instructions for use and the installation requirements of the ridge.

In short, for the accident of the range hood head-banging, we should deal with it in time, and at the same time pay attention to prevent the occurrence of similar incidents.

If your range hood has a broken head, here are some steps you can take:

1.Contact the manufacturer or after-sales service center: If your range hood is still under warranty, you can contact the manufacturer or after-sales service center for free repair or replacement. Even if the warranty period is out, you can ask them about the cost of the repair and decide whether to opt for the repair or not.

2.Find a professional repairer: If your range hood is out of warranty, you can find a professional repairer to repair it. You can search for relevant repair companies on the internet or consult your local appliance repair shop.

3.Self-service repair: If you have certain repair ability and experience, you can also repair it yourself. You will need to purchase a new range hood handle and remove and replace it according to the product manual. Please pay attention to safety and avoid greater losses.

4.Replace your range hood: If your range hood has exceeded its useful life or is too badly damaged, you may consider replacing it with a new one. When choosing a new range hood, choose the brand and model carefully, and pay attention to things like bending performance and after-sales service.

In conclusion, when your range hood handlebar is damaged, take the above options according to the specific situation and choose the one that works best for you.