In life, how to judge the quality of a range hood?

It is inevitable that there will be problems after the range hood is used for a certain period of time, and it is also a large cost to maintain, if you choose a good after-sales service brand range hood can avoid this problem, you can leave us with a lot of money, so this is also an important criterion for judging the quality of the range hood.

The best and most direct way is to look at the effect of smoke suction, if you haven't bought it, you can also look at the evaluation of other users, or see if the people around you have bought the same model, this is the most advanced way.

A good range hood must be certified for safety, a range hood must ensure safety when in use, if the safety is not talked about, then there is no need to buy, so this is also the reason why I recommend everyone to buy a brand range hood instead of a miscellaneous range hood.

It's simple: look at the ...... of originCixi production can not be wanted; Second, look at the ** ......Below 700 yuan is a regular brand, and more than 700 yuan is a miscellaneous brand; Third, look at the structural ......The top suction type is good, the side suction type is poor, and the integrated stove is the worst.

A good range hood must be very convenient in operation, such as the design of the buttons, the design of the oil cup, whether the range hood switch is fast, and whether there is a timing function, whether the lighting line is suitable and so on.

Whether the range hood can clean up the range hood is the most basic standard for judging the quality of the range hood, if a range hood can not remove the smoke then it is a garbage range hood, the judgment method is to check in person or according to the parameters of the range hood to judge the performance of the range hood.

The noise is also a criterion for measuring the quality of the range hood, and excessive noise will affect people's health. Therefore, while ensuring the suction power of the range hood, the less noise the better.

The cleaning of the range hood has always been a problem, although there is automatic cleaning and no disassembly cleaning, but it is still not really possible to completely clean the range hood, so a good range hood must be very convenient to clean.

Mainly look at the structure of the smoke machine, if the smoke exhaust is good, there must be a large and deep smoke hood above all the pots, which is bulky. The smoke hood is ultra-thin or there is no smoke hood, and the appearance is light and beautiful, but the smoke exhaust must be poor. For details, please refer to the introduction of the new re-suction range hood **, and explain the performance advantages and disadvantages of various range hoods.

And introduce the correct method of testing the final smoke exhaust effect after the installation of the range hood.

For the air volume, fan power and noise of the range hood, it should be considered comprehensively, the air volume and fan power are not as large as possible, and the fan power and air volume should be as small as possible under the premise of achieving the same net rate, so as to save energy and save electricity, and can achieve better silence.

We are happy to serve you, the suction power of the range hood is usually expressed in air volume, and the specific unit is cubic meter hours. Generally speaking, the higher the airflow of the range hood, the stronger the suction. Therefore, when you buy a range hood, you should choose the right one for you according to your kitchen area and frequency of use.

Usually speaking, the air volume of the range hood used by the family is 500-1000 cubic meters, and the filial piety between the congs can meet the needs of the general family. At the same time, you should also pay attention to factors such as the noise level of the range hood and the ease of cleaning.

If the suction power of the range hood is too small, it will have a certain impact on the kitchen exhaust fume. How to judge the suction power of the range hood? Let's take a look.

Under normal circumstances, the suction power of the range hood depends on two aspects; One is the exhaust air volume of the range hood, and the other is the distance between the air inlet of the range hood and the pot surface.

The range hood itself has a sign, look at the air volume on it, the larger the number, the greater the suction. Generally speaking, the larger the air volume, the greater the suction power, and the better the smoke extraction effect! At present, the national standard is that the exhaust air volume of the range hood shall not be less than 7, in fact, the existing range hoods on the market far exceed this standard, all about 15.

Generally, the parameters of the oil smoke machine mainly depend on the power, exhaust air volume and decibel number. The smaller the power, the larger the exhaust air volume, and the smaller the decibels, the better such a smoke machine.

1. Look at the appearance, color and practicality: a smoke machine, like various kitchen appliances, will also affect the overall pattern of the kitchen. The development direction of the modern kitchen is to highlight humanization, artistry and personalization.

Whether the humanized structure design can bring you the enjoyment of life in Sakura? Whether the color of the smoke machine matches the kitchen decoration style, such as the style of the Song Buguo smoke machine loses the overall decoration style of the kitchen, it will leave you with an indelible visual regret.

2. Look at the workmanship and material of the product: the preferred material of the range hood shell should be non-pro-fume, wear-resistant, corrosion-resistant, good strength, and have a long service life, and it is also very convenient to engage in hygiene. The workmanship can be observed from the thickness of the material, the surface of the product and the corners of the product, if the product has no unevenness, no color difference, and tight structure in these aspects, the workmanship of the product is good.

3. Look at the effect of suction and net fume: the near-suction range hood, its air inlet installation height is close to the pot surface, when the hood is running, a large range of negative pressure area airflow barrier is formed around the stove, and the oil pot is covered in it, the oil smoke rises from the pot surface with a smile, and it is too late to diffuse, and it is immediately inhaled into the air inlet with the air flow laterally, and the oil smoke absorption effect is very good, and the oil smoke absorption rate can reach more than 99. Due to the close installation, the use of smaller power motors can also achieve satisfactory results, low noise, energy saving and money.

4. Look at whether there is a fume filter and separation device: the range hood without the fume filter and separation device is commonly known as: in-line range hood, although the effect is good at the beginning, but it will not take long to cause endless troubles, and we don't have to consider it at all.

5. The installation method of the smoke machine: the near-suction range hood is a wall-mounted near-suction installation, and the air inlet is as close to the pot surface as possible, only 0 to 10 cm to create conditions for sucking up the fume.

If you want to judge the quality of the smoke machine, you can start from the aspects of motor, suction, static pressure and function. Some of the poor fans are inferior motors, not to mention the suction and static pressure, and the smoke exhaust effect can't bear to look at directly. Later, I changed the Siemens upper and lower double range hood LS68FC9C1W, the motor is the original German factory intelligent strong exhaust frequency conversion motor, and the warranty is 10 years, the suction power is as high as 25m3 min, and the static pressure is as high as 1200pa, which belongs to the top level on the market.

There is also an intelligent wind speed adjustment and an intelligent anti-backfill system, with this smoke machine, not only do you not have to adjust the wind speed yourself, but the air at home is cleared and the bridge stove is new. The patented hot air self-cleaning function, one-key oil melting and sterilization, it eliminates the trouble of asking the master to disassemble and clean the previous hood every year. So you still have to buy a good cigarette machine, which really saves a lot of trouble!

When buying a range hood, it is not that the greater the suction, the better. People need to buy according to their needs, just like when you buy a car, the more motivated, the better. If you have an open kitchen and need a particularly efficient range hood, you can choose a range hood with relatively large suction power, and the air volume can be 20 cubic meters per minute.

If the kitchen area is relatively small, you should buy a smaller range hood so that it will not form too much noise.

When decorating a house, people have a lot of doubts, not only to worry about hard decoration.

In terms of various facilities, we must also strive to do a good job in soft decoration. Among them, the range hood is part of the soft decoration, if the range hood is not selected well, it will make the people at home very troubled when cooking. For the part, the wind power of the range hood can be appropriate, it doesn't need to be too big, but it can't be too small either.

If it is too big, it will form a lot of noise, and the power consumption is also extremely high, and the use of the range hood will be a lot of electricity bills every month. If it's too early, it will not allow the fumes to be completely absorbed, and it will also make the kitchen smoky and burning, and let yourself get too much smell when cooking.

When buying a range hood, you can go to the Internet to check some information, according to the size of your kitchen area to buy different air volume range hoods, the air volume here is actually another word for suction. There are many range hood brands in the market, and netizens can also enter the word range hood in the shopping software, and then choose the most cost-effective one to buy. If you don't like online shopping, you can go to a physical store**.

Famous does not mean that it is particularly easy to use, there are some less famous range hoods, but they are very suitable for small kitchens and can help you save a lot of money.

When using a range hood, it is also necessary to judge whether it needs to be cleaned by the size of the noise. For example, if the noise is particularly loud and the smoke exhaust effect is very poor, it means that it is clogged inside, and you need to ask someone to clean it.

The quality of the range hood can not be judged by the suction power alone, and it is necessary to refer to the comprehensive data to judge the quality of the range hood from the air volume, wind pressure and noise size, but some people will still determine the quality of the range hood only by the wind power of the range hood, thinking that as long as the power is large, the suction power is a good quality product, but once the wind exceeds a certain standard, the noise generated is also very large, and the increased power consumption also goes up. Therefore, a good range hood should match the power and air volume to a just right value, which is energy-saving and silent and does not affect the use effect.

What do you need to pay attention to when buying a range hood?

1. According to the kitchen space and installation location, choose the appropriate range hood style, instead of only looking at the size of the hood style and ignoring the actual use environment.

2. Choose a big brand, so that the quality is guaranteed, and there is also after-sales service that can be solved.

3. Choose the right product performance, there are many styles and performances of range hoods, each with different applicability, in addition to the appearance and style, we should also pay attention to whether the performance is suitable for your own needs, and also take into account the decoration style of the kitchen.

4. After choosing a good one, it is necessary to comprehensively consider its quality, in addition to the size of the wind, it depends on the noise generated by the work, and there are additional parts such as cleaning, which one is more advantageous.

The style of the range hood on the market is divided into Chinese range hoods according to the major categories, which are generally designed according to market demand The smoke cavity is deep, strong adsorption and other characteristics, and there is a negative pressure area, even if the oil smoke is gathered, it will not leak into the room, the European range hood is actually improved on the basis of the Chinese style, the shape has joined the European and American style, the effect is still the effect of the Chinese style, the side suction range hood, the structure is actually similar, the different installation positions are inclined to be low, and the oil smoke can be sucked away when the smoke does not diffuse, And there is no end to the end of the installation position.

No, because most of the range hoods work according to the principle of kinetics, if the suction power is very large, there may be a lot of noise, which will affect the normal use, and the value of the downair volume will also be affected.

No, we also have to look at the way of movement, and we also have to look at the parameters, the knowledge in it is still quite large, and it is not that the greater the suction, the better.

I think it's definitely not, the suction power is particularly large, the efficiency of the range hood will be higher, I think it is the air volume that determines the quality of the range hood.