There are many things that need to be paid more attention to in decoration, is it the key to press t

When many customers paste the bathroom tiles, they stipulate that the bricklayer wall is pressed to the ground, which is actually the wall tile pressing on the pavement tile; The reason for this is that water falling from the walls does not seep through the gaps under the tiles or even leak downstairs. In fact, no matter what kind of construction method, if the moisture prevention is not done well, it will leak, so the wall pressing the ground and the ground pressing wall are not important. Let's talk about the pros and cons from a technical point of view.

The wall is pressed to the ground, and the first one at the bottom has to be pasted with bricks, because the whole brick cannot be used, the small strips are handed over to the conspicuous place to be aesthetically discounted; Of course, the toilet has a water flow inclination, and the bottom tile must be cut by hand, which is certainly not as neat and beautiful as the built-in edge of the original brick. In the past, in fact, to do road construction, pay attention to the inside of the first to start, gradually retreat outward, after the withdrawal will not come in again, and wait for drying and then enter, in order to be afraid of the actual operation on the delicate tiles, the soles of the sand concrete will be likely to hurt the tile chrome.

If you press the wall processing technology, at least the bottom of the wall tiles are standing on the floor tiles to do the construction, but also the concrete is also glue, and you also need to go in and out of the bathroom one after another to cut the bricks, and the relativity will step on the floor tiles dozens of times. In comparison, it would be better to press the wall.

I firmly believe that the customer did not mean to, but read the content of some articles in search or other browsers. But what I want to say is that those children who have published articles at a level are basically Internet trolls who have no construction work experience, and there are very few people who have done interior decoration for more than 30 years and published articles in order to get a salary.

Interior decoration is a cumbersome engineering project, must be considered by the owners of the community to meet the needs of the area of many areas, I hope that the owners of the community do not put their energy on such a small and inconsequential matter, technical professional things to professionals, concentrate their own limited resources and energy, more consider their own life needs. For example, whether a customer likes to wear jeans or a skirt will lead to different wardrobe structures; The customer loves boots or all casual shoes, which results in different file formats for shoe racks. Think about it more, it's too late to think about it after the decoration.

Yes, it is indeed a very critical construction process, which is not only aesthetically pleasing, but also able to achieve a good waterproof effect and drainage effect.

This is not the key issue, how to choose it depends on the decoration style, as well as the materials used in the connection between the floor and the wall, as long as it is suitable, it will look good.

Of course not, no matter which method you choose, as long as the waterproofing work is not done in place, it will leak.

After a long time of decoration contact, you will really encounter all kinds of strange problems, such as requiring bricklayers to use the wall to press the ground when they are asked to paste tiles. Asked him why he asked for this, and his answer was also very bright "said on the Internet"! Which is more correct, the ground pressure wall or the wall pressure ground?

So Jiang Pingping, who has been decorating for more than 30 years, will talk to you, what you said is not reliable!

Wall pressing and ground pressing wall are both a way of paving ceramic tiles, but there is no one that is good and which is bad. No matter which construction method is used, if the waterproofing is not done well, it will leak, so the wall pressing the ground and the ground pressing the wall are not the key. Therefore, no matter which construction method you use, as long as the waterproofing is done well, the water will not seep into the tile from the gap, and there is even a possibility of leaking downstairs.

Explaining why, let's see what difference is made in the construction!

The construction method of wall pressing the ground needs to be pasted with a special strip on the bottom side first, because the whole brick cannot be used, and the small strip is left in the obvious place to reduce the aesthetics; For example, the bathroom needs to have a slope of flowing water, and the bottom tile needs to be cut manually, which is definitely not as good as the original brick with neat corners. If there is a water leak, then you need to remove the wall tiles before you can repair the floor tiles. This will be very troublesome and not good for the owner.

When doing the construction of the ground pressing wall, we will start from the innermost first, and then slowly retreat outward, and do not go in for the time being after exiting, and can only enter after drying, the reason for this is that we are afraid of standing on the tile and then operate, and the sand cement stained on the sole of the foot may hurt the tile chrome.

If you follow the construction method of wall pressing the ground, at least the bottom of the wall tiles is to stand on the floor tiles to do construction, and it is cement and glue, and you have to go in and out of the bricks one after another, and you have to step on the floor tiles dozens of times. The probability of tile chrome injury has increased dozens of times, in case of unfortunate tile chrome injury, it is not to rework, is it to destroy the mood and delay the construction period!

Since the wall pressure and the ground pressure wall can achieve the same effect, in comparison, is the ground pressure wall will be more able to ensure the "safety" of the tile.

The process of renovation is cumbersome, and owners without professional knowledge are indeed easily frightened by some rumors on the Internet! What we need is to go to the renovation sites of different companies and ask the master on the spot, what is the reason for this? Don't let yourself become stubborn because of rumors, leave professional things to professional people!

Anyway, no matter what he does, as long as there is a problem, he still needs to bear the consequences!

It is best to choose wall and floor tiling for kitchen and bathroom tiling.

In the general kitchen and bathroom decoration, among these two ways of paving tiles, Xiaomei recommends choosing the wall to press the floor. Why did you choose this?

1. Because when the water splashes on the wall, it will flow down the wall to the root of the wall, and then drain down the floor drain; In the case of ground pressure walls, water flows directly from the wall to the root of the wall, which will seep into the waterproof layer in the long run, thus affecting the use of ceramic tiles.

2. The wall pressing will not affect the wall tiles during construction, and the construction period will not be delayed.

Therefore, through the above two points, the kitchen and bathroom bricks must be paved with the wall and the ground. Here I would like to remind you of one point: to reserve a certain height difference, generally the height of the entrance and the lowest floor drain, the height of the general door and the floor drain is best in 2 3 cm, so that the water on the surface can flow into the floor drain, so as to discharge.

Chuangqi starting point decoration.

If you use a floor-pressed wall, it will easily become trapped in the crevices and cause odors. And over time, the dry ash layer will also become moldy, and the moisture will be left along the dry ash layer to the door, which will cause the floor of other rooms to deform and arch.

In general, the overall aesthetics of the wall is better, and there will be no too large gaps with the naked eye.

The wall is well pressed and seamlessly connected, and the glass glue can be dotted without the baseboard.

It should be a ground pressure wall. This makes it easier to hide dirt and dirt, and it is also very easy to clean.

The ground pressure wall is better, so it is very convenient to clean, and it is also very convenient for the decoration of some things inside.

The ground pressure wall should be chosen, which is also a mainstream decoration style in the market, and its cost is relatively low and the production is relatively simple.

I think it's better to choose wall pressing because it looks more aesthetically pleasing.

There are two construction methods for the connection between tiles and wall tiles in bathroom decoration, one is wall tiles pressed floor tiles, and the other is floor tiles pressed wall tiles. These two different methods cause many people to struggle with which construction method is better. Bian Xiao specially consulted the expert master, only to know that there are many doorways.

As can be seen from the figure, before laying the floor tiles, how to paste the wall tiles, so that the integrity of the paving method will be better. But there are also those who believe that there are gaps in the pressure wall that allow water to easily penetrate and may leak downstairs. If the water penetrates downstairs, it is actually not waterproofed well, and it has nothing to do with the pressure of the wall.

As long as you do a good job of waterproofing, it won't leak! Let's take a look at the construction method of the pressed wall. The construction method of pressing wall bricks is that the bricks are laid in good condition, and after the wall tiles are pasted, the bottom layer should be retained and tiled.

This kind of brick will have cracks, and the overall feeling is not as good as pressing the wall.

Generally, when laying floor tiles, the master slowly sticks them from the innermost outward. After pasting, you can't step on it, but you are afraid that you will scratch the ground if you step on the mud and sand on the soles of your feet and walk back and forth from the tiles. And the walls should be covered with floor tiles, and then the tiles of that house should be pasted.

During construction, more than a dozen bricks must be stepped on. Generally, the decoration company will choose the wall pressed floor to facilitate the waterproofing in the later stage. Many renovation companies outsource waterproofing, so how do they make it convenient?

The ideas of the owners will not be taken into account. In contrast, it is better to press the wall, which is also a common paving method in our construction. Another advantage of pressing the wall is that it is conducive to hooking joints.

When the master paves the wall, the wall tiles must be pasted, square, and the inner angle is 90 degrees. If you don't stick to the floor tiles, you will waste work and cut the floor tiles. Conclusions drawn from practice.

Pressing the wall, simply put, is to paste the wall tiles first, and then paste the floor tiles and wall tiles, which is fast and convenient. However, there is a criticism of the pressure wall, that is, the gap between the floor tiles and the wall tiles is visible, even if the waterproofing is done, the water will still slowly penetrate, which can easily lead to the accelerated aging of the waterproof layer. For the ground pressure wall, the PU method is laid from the bottom up, so the reason for laying is that the tile paste is not easy to appear hollow!

The overall appearance is also better! Over time, it is easy to accumulate dust. We can all see that the gap between the floor tiles and the wall tiles is often large.

In this way, if you are in the bathroom, it will seriously affect the waterproof effect! It will also affect the aesthetics!

This process is more complicated, because the top layer of wall tiles should be pasted first, the bottom layer should be left blank, and then the floor tiles should be paved, and the last row of wall tiles should be pasted after the ground is dry and fixed, so that there are no gaps and it is more durable. The wall pressing technology is actually the most standard technology for bathroom decoration. Some workers don't want to spend too much time, so many will choose to simply press the wall.

If we want to make the toilet more durable, we must choose the wall pressing technology. The water that runs down the wall will run directly down the tiles instead of directly into the gaps. The advantage of this method is that the water on the wall flows directly into the floor drain with the tiles and does not flow into the gaps!

If you use a pressure wall, it is easy to stay in the crevices and produce odors. And over time, the dry ash layer will become moldy, and the moisture will stay in the doorway along the dry ash layer, causing the floor of other rooms to deform and arch. Generally speaking, the overall aesthetics of the wall pressing the ground is better, and there will be no excessive gaps with the naked eye.

The ground pressure wall will be better, and the floor tiles will also be scrapped to cut the floor tiles, so you don't have to worry about water leakage, as long as the waterproof is done, it will not leak.

"Ground pressed wall" belongs to the most basic process of tile paving, there is nothing simpler than this, so it is the simplest ceramic tile construction method at present.

The paving method of wall tiles pressing floor tiles presents the gap between the wall tiles and the floor tiles on the façade, so that from the plane point of view, the gap is not obvious, and the aesthetics of the bathroom tiles can be improved to a certain extent.

In the decoration, we should first paste the wall tiles, reserve enough distance at the bottom of the wall tiles, from the second row to the top, until the wall tiles are completed, and then lay the floor tiles from the inside to the outside, and finally cut the tiles of the appropriate size to the row at the bottom of the wall according to the reserved size. Toilet leakage has nothing to do with this toilet brush waterproofing, the main brick is before the toilet floor is a protective layer, our construction method first paste the wall, because the toilet floor has a slope first paste the wall tile can ensure the integrity of the wall tile and floor tile! It is also convenient for construction, more beautiful and more practical!

Bathroom decoration often considers pasting tiles, tile paste, beautiful, easy to maintain. But pasting tiles is a delicate drip. Be sure to paste the floor tiles first and press the floor with the wall, this is because the kitchen is a humid space, paste the floor tiles first, and then press the floor tiles with the wall tiles, which can avoid problems such as water flowing out with the gap between the floor tiles and breeding bacteria.

In the bathroom decoration, there are two construction methods for the connection between tiles and wall tiles, one is the wall tile pressing floor tile, and the other is the floor tile pressing wall tile. These two different methods have led to a lot of entanglements for many people who don't know which construction method is good. Shaw specifically consulted with the expert owner, only to know that there are many ways.

As you can see from the diagram, how to paste the wall tiles before laying the floor tiles so that the integrity of the paving method will be better. But some people think that there are gaps in the pressure wall, and water can easily seep in and may leak downstairs.

If the water seeps into the downstairs, in fact, the waterproofing is not good, and it has nothing to do with the wall pressure. As long as it's waterproof, it won't leak! Let's take a look at the construction method of pressing the wall.

The construction method of pressing wall bricks is to lay the bricks in good condition, and after the wall tiles are pasted, the bottom should be retained and the bricks should be pasted. This kind of brick will have cracks, and the overall feeling is not as good as pressing the wall. There is not much difference between the ground pressure wall or wall pressure construction and laying method, see which method you like, as for the waterproof effect, after laying the floor tiles, you need to do the waterproof construction of the floor tile beauty joints, the waterproof beauty joints are not handled well, and any method of laying tiles is useless, so whether the wall pressure or the ground pressure wall is the same.

Therefore, the most standard method for pasting tiles for bathroom decoration is wall tile pressure floor tile, that is, a row of tiles at the bottom of the wall tile, which should be pasted after the floor tile is pasted, and the final laying effect is the wall tile pressure floor tile instead of the floor tile pressure wall tile. The benefits will be obvious, not only will there be no joints, but they will also look good visually, the joints are tile glaze, and the waterproofing is good, but the disadvantage is that the requirements of the technicians will be very high.