When decorating, choose the wall to press the ground or the ground to press the wall, which is more

When decorating, choose the wall to press the ground or the ground to press the wall, which is more conducive to drainage? Bathroom, as the most important component of the home, should be designed with not only practicality in mind, but also overall aesthetics. When choosing a drainage method, many people will fall into such a tangle:

Wall row or floor row?

In fact, no matter what the construction method is, if the waterproofing is not done well, it will leak, so the wall pressing the ground and pressing the wall is not the key.

Let's analyze the pros and cons from a technical point of view.

The wall is pressed to the ground, first of all, the bottom slip should be pasted with a special strip, because the whole brick cannot be used, and the small strip is left in the obvious place itself to reduce the aesthetics; The bathroom has a natural flow slope, and the bottom tile needs to be cut manually, which is definitely not as good as the original brick with neat corners.

In the past, we did ground construction, focusing on starting from the innermost first, slowly retreating outward, and no longer going in after exiting, waiting to dry and then enter, in order to be afraid of operating on the exquisite tiles, and the sand cement stained on the soles of the feet may hurt the tiles chrome.

If you follow the wall pressing process, at least the bottom of the wall tiles is to stand on the floor tiles to do construction, and it is cement and glue, and you have to go in and out of the bathroom one after another to cut bricks, and you have to step on the floor tiles dozens of times.

In comparison, isn't it better to press the wall?

I believe that the customer did not mean it, but read or other ** articles to form a wrong idea; But what I want to say is that those children who have the ability to write articles are basically keyboard warriors with little construction experience, and there are very few people like Jiang Pingping who can write articles after more than 30 years of decoration.

Decoration is a complicated project, the owner needs to consider their own needs of the place is very much, I hope the owner does not focus on such a small and inconsequential matter, professional matters to professionals, concentrate their limited energy, more consider their own life needs.

For example, whether customers like to wear jeans or skirts will lead to different wardrobe structures; Whether the customer prefers high boots or all sneakers results in a different format for the shoe cabinet.

Because the whole brick cannot be used for the wall, the bottom tile needs to be cut manually, and the corners will be untidy. The ground pressure wall is laid from the inside to the outside to avoid scratching the tiles, which is more reasonable, and the drainage depends on the quality of the waterproofing, and has nothing to do with the choice.

I recommend that you choose a wall to press the floor, so that it can be more convenient to drain the water, and it will also make your bathroom less damp.

Because the "wall pressing" construction technology in the construction, is to pave the wall tiles first, but the bottom row of tiles do not stick, and wait until the wall paving is completed, the ground and the wall are not tiled part of the waterproof again, so that the wall and the place will form a whole, which is more conducive to the integrity of waterproofing, and ensures that the waterproof will not leak.

There are two construction methods for the connection between tiles and wall tiles in bathroom decoration, one is wall tiles pressed floor tiles, and the other is floor tiles pressed wall tiles. These two different methods cause many people to struggle with which construction method is better. Bian Xiao specially consulted the expert master, only to know that there are many doorways.

As can be seen from the figure, before laying the floor tiles, how to paste the wall tiles, so that the integrity of the paving method will be better. But there are also those who believe that there are gaps in the pressure wall that allow water to easily penetrate and may leak downstairs. If the water penetrates downstairs, it is actually not waterproofed well, and it has nothing to do with the pressure of the wall.

As long as you do a good job of waterproofing, it won't leak! Let's take a look at the construction method of the pressed wall. The construction method of pressing wall bricks is that the bricks are laid in good condition, and after the wall tiles are pasted, the bottom layer should be retained and tiled.

This kind of brick will have cracks, and the overall feeling is not as good as pressing the wall.

Generally, when laying floor tiles, the master slowly sticks them from the innermost outward. After pasting, you can't step on it, but you are afraid that you will scratch the ground if you step on the mud and sand on the soles of your feet and walk back and forth from the tiles. And the walls should be covered with floor tiles, and then the tiles of that house should be pasted.

During construction, more than a dozen bricks must be stepped on. Generally, the decoration company will choose the wall pressed floor to facilitate the waterproofing in the later stage. Many renovation companies outsource waterproofing, so how do they make it convenient?

The ideas of the owners will not be taken into account. In contrast, it is better to press the wall, which is also a common paving method in our construction. Another advantage of pressing the wall is that it is conducive to hooking joints.

When the master paves the wall, the wall tiles must be pasted, square, and the inner angle is 90 degrees. If you don't stick to the floor tiles, you will waste work and cut the floor tiles. Conclusions drawn from practice.

Pressing the wall, simply put, is to paste the wall tiles first, and then paste the floor tiles and wall tiles, which is fast and convenient. However, there is a criticism of the pressure wall, that is, the gap between the floor tiles and the wall tiles is visible, even if the waterproofing is done, the water will still slowly penetrate, which can easily lead to the accelerated aging of the waterproof layer. For the ground pressure wall, the PU method is laid from the bottom up, so the reason for laying is that the tile paste is not easy to appear hollow!

The overall appearance is also better! Over time, it is easy to accumulate dust. We can all see that the gap between the floor tiles and the wall tiles is often large.

In this way, if you are in the bathroom, it will seriously affect the waterproof effect! It will also affect the aesthetics!

This process is more complicated, because the top layer of wall tiles should be pasted first, the bottom layer should be left blank, and then the floor tiles should be paved, and the last row of wall tiles should be pasted after the ground is dry and fixed, so that there are no gaps and it is more durable. The wall pressing technology is actually the most standard technology for bathroom decoration. Some workers don't want to spend too much time, so many will choose to simply press the wall.

If we want to make the toilet more durable, we must choose the wall pressing technology. The water that runs down the wall will run directly down the tiles instead of directly into the gaps. The advantage of this method is that the water on the wall flows directly into the floor drain with the tiles and does not flow into the gaps!

If you use a pressure wall, it is easy to stay in the crevices and produce odors. And over time, the dry ash layer will become moldy, and the moisture will stay in the doorway along the dry ash layer, causing the floor of other rooms to deform and arch. Generally speaking, the overall aesthetics of the wall pressing the ground is better, and there will be no excessive gaps with the naked eye.

The ground pressure wall will be better, and the floor tiles will also be scrapped to cut the floor tiles, so you don't have to worry about water leakage, as long as the waterproof is done, it will not leak.

"Ground pressed wall" belongs to the most basic process of tile paving, there is nothing simpler than this, so it is the simplest ceramic tile construction method at present.

The paving method of wall tiles pressing floor tiles presents the gap between the wall tiles and the floor tiles on the façade, so that from the plane point of view, the gap is not obvious, and the aesthetics of the bathroom tiles can be improved to a certain extent.

In my opinion, it is better to decorate the bathroom or the ground pressure wall, which can effectively prevent the corrosion of the wall and protect the wall.

It would be better to choose the wall for bathroom decoration. Because such a decoration generally does not leave gaps. It will be a little more convenient to use.

The design of the wall pressing the floor should be chosen. This is due to the fact that water can be better isolated from entering the floor through this design, and it can also have a waterproof effect.

It should be a ground pressure wall. This makes it easier to hide dirt and dirt, and it is also very easy to clean.

The ground pressure wall is better, so it is very convenient to clean, and it is also very convenient for the decoration of some things inside.

The ground pressure wall should be chosen, which is also a mainstream decoration style in the market, and its cost is relatively low and the production is relatively simple.

I think it's better to choose wall pressing because it looks more aesthetically pleasing.

Bathroom tiles should be pressed on the wall or on the ground, which has been controversial, because these practices have been used so far, I think the first release of the wall is the decoration company, the elements are the ground pressure wall early in the morning, the decoration company in order to reflect the advantages, the release of the wall pressure method to smoke customers, to the present day for the standardization of the basic requirements of the decoration company are all wall pressing, and some small decoration companies and self-installation are almost all to the wall to do. Wall tiles pressed floor tiles: The water dripping from the wall immediately flows into the glaze layer of the floor tiles, and because the floor tiles will not be flat, they must establish an inclination to the deodorant floor drain, so this water is not easy to deposit, <>

In the end, it all flows into the anti-odor floor drain, scientifically only need to do a good job of moisture-proof, the construction technology is qualified, no matter which method, there will be no water seepage. From the perspective of thermal expansion and contraction, and the flatness of the wall at the specific construction site, the pavement is paved with the wall to leave a telescopic gap, and it is unlikely to be close to the wall to paste tiles. Therefore, doing a good job of moisture prevention is the first step.

In terms of substantive definition, the wall bricks are pressed in the process of operation, not from the bottom of the brick gradually paved, but from the second gradually, but after all the floor tiles are paved, the bottom wall bricks are pasted, so that the floor tiles can be pressed just right. On the other hand, the floor tile pressing the wall means that the wall tiles are gradually pasted from the bottom, and then the floor tiles are pasted after the wall is pasted. <>

If it is a ground pressure wall, it is because the deformation joint of the floor tile and the wall tile should be vacated between the floor tiles, so the gap is very large; Water falling from above is very easy to seep into the floor tiles along the gap, and the floor tiles are damp and cold for a long time, which is very easy to breed bacteria and cause odors. The water accumulates in the bottom for a long time, and there is a lot of water, and there is a waterproof ground that blocks homelessness, and it is very likely to flow to the door of the house, endangering the floor material in other areas, or causing the wall foot to peel, and the solid wood door to rot and deteriorate. Therefore, in the case of pasting the wall tiles of the bathroom, it is recommended to gradually paste the bricks from the bottom to the top, and at the same time, the bottom floor tiles should be supported by the corresponding protective layer cushion blocks.

Then put wall tiles on the top step by step.

Personally, it is recommended that the wall tiles in the toilet do not have to be capped at one time. It is necessary to use the method of layer-by-layer pasting to carry out tiling. Until the wall tiles in the toilet have completely achieved compressive strength, finally the floor tiles at the bottom of the wall tiles in the toilet are repaired.

At this time, two methods can be used in the process of laying this aspect of the floor tiles: the first is to immediately reach the inside of the wall and make the wall to press the floor. The second is to immediately hit the wall tiles in the bathroom to make a floor pressure wall.

Personally, it is recommended that the wall is pressed to the ground, and the bathroom floor generally has an inclination, and the probability of flowing water into the gap is smaller in terms of the direction of the water flow of the wall. Water flows to a low place, the wall is not easy to leak to the ground, the low voltage wall gap is degummed, the heat rises and shrinks, and it is easier to stay under the floor tiles, resulting in water storage.

I think it's better to press the wall to the ground, which will be stronger, and it will look more beautiful, and the service life will be longer, and most people will also use this method.

The wall is well pressed to the ground. It is best to choose the wall floor for bathroom tiles, because the bathroom is a place that requires the separation of dry and wet, and its waterproofness must be considered during the decoration process. Usually, the walls of the bathroom are prone to water, and water will run down the walls.

If you press the wall to the ground, the water will naturally flow to the floor tiles.

Because the moisture and water apparatus in the bathroom are heavier, it is better to choose the wall to press the ground when decorating the bathroom, and the water vapor on the wall will flow out just along the floor.

Is it better to use the bathroom floor to press the wall or the wall? Which is cheaper? The best choice for bathroom tiles is to stick the walls to the ground, because the bathroom is a place that needs to be dry and wet, and its waterproofness must be considered during the renovation process.

Generally speaking, the walls of the bathroom are prone to water accumulation, and water will run down the wall. If you choose a wall to press the floor, the water will naturally flow to the floor tiles and finally to the floor drain. But if you choose to press the wall, water will seep into the gaps in the edges of the tiles in the corners.

Cost: The wall is lowered to a position higher than the ground pressure wall. As mentioned above, it is difficult to lay bricks in the air by pressing the wall against the ground.

The cost of time and labor is high. The construction difficulty of the ground pressure wall is low, the cost is low, and the cost is low.

1. Construction difficulty: wall sticking to the ground is better than wall sticking to the ground. It is more difficult to lay a wall against the ground than it is to build a wall against the ground.

After all, ground pressure walls are laid from the ground. Slopes and trenches are relatively easy and do not fall off easily. The pressure wall starts from the wall, and there is no focus in the air, which is difficult to level; In addition, tile cutting is difficult, masters without proper skills will slip off during laying, and the risk of tile damage is high.

This is also a big reason why most teachers are reluctant to do the wall.

2. Durability: The pressed wall is better than the pressed wall. The floor tiles pressed on the wall tiles are easy to form vertical "sky joints", and the wall water is easy to flow into the floor tile joints.

In the long run, bacteria can grow and erode the waterproofing layer and weaken the waterproofing effect. While walls and floor tiles will also leave a gap, this gap is parallel to the ground, and the water flowing from the wall to the ground will flow down the slope to the floor drain and then drain. Comparatively speaking, less water vapor is left behind, and the waterproof effect is more guaranteed.

3. Aesthetics: It is better for the wall to press the ground than the wall to the ground. Ground compaction wall has obvious advantages over ground compaction wall, that is, the construction cost is higher.

If the money is not bad, a wall pressed against the floor can be preferred when laying bricks in the bathroom. This does not mean that the ground pressure wall is bad. Suffice it to say that it depends on individual needs and preferences.

Regardless of the type of paving you choose, one of the main prerequisites is that the waterproofing and slope of the restroom should be in place. Without these two guarantees, no matter how good the method of paving is, it is a decoration!