Why does the beauty sewing agent crack after playing?

Updated on home 2024-07-14
10 answers
  1. Anonymous users2024-02-12

    With the change of seasons, the temperature of the floor is also sometimes cold and hot, especially in the north, most families are installed with floor heating, when it is cold, it is particularly cold, and when it is hot, the floor will be very hot, so that in the case of a large temperature difference between cold and hot, the beauty seam will crack.

    There are also several particularly noticeable drawbacks.

    1: Poor durability.

    Some first-class businessmen reported that the customer had not moved in yet, and the full-fill sewing agent cracked in just 2 months. When the temperature of the chemical resin does not change, it will have a chemical reaction with the air after it is hit, and there will be cracking, which of course is also related to the amount added by the manufacturer.

    2: Poor effect.

    Now a family is also a lot of money after doing the best filling of the sewing agent, if there is no effect after the completion of the customer will think that we are deceiving him, the corresponding settlement is also a problem, on this issue we have deceived the customer? The answer is no, because if you compare it, you will understand that after adding chemical resin, the color of the full-filled sewing agent will become dull and lusterless, and the effect of such a sewing agent will not be shown.

    3: Discoloration Discoloration.

    The surface protection is not good, and it is not resistant to organic solvents, heat and corrosion.

  2. Anonymous users2024-02-11

    There are many problems of cracking, but most of them are quality problems, it is recommended to choose two-component sewing agents on the market, such as Korean Jingcai sewing agents, one-component sewing will have cracking, peeling, collapse and other problems, I hope this can help you!

  3. Anonymous users2024-02-10

    1. If you are greedy for cheap and buy cheap sewing agent, this kind of sewing agent has poor stain resistance, and it may change color after being used for a long time, which will affect the aesthetics of the ground.

    2. In order to save money, some people choose to buy cheap curing agents, as the so-called penny and pants are divided, and things that are too cheap are often not good for quality and cracking. In addition, the toxicity of cheap curing agents will be greater than that of other materials, harming people's bodies, and this product will also permanently volatilize indoors, if it is serious, it will cause cancer or infertility.

    3. In order to save money, many people will add fillers to the sewing agent, which will lead to unnatural color and poor gloss of the sewing agent.

    4. Insiders know that professional equipment and tools are used when doing tile seams, and some owners use inappropriate equipment in order to save money, resulting in bubbles, particles or local non-curing problems.

    Tile seams are good, but judging from the above complaints, if the tile seams are not constructed well, they will also affect the appearance. There are three shortcomings of tile seams as follows:

    1. The construction is more difficult to achieve perfection: the construction process of the beauty sewing agent is relatively simple, but after the construction is completed, it will be found that it is difficult to achieve smoothness on the surface, and the surface is uneven to the touch, and it cannot be wiped with something, and the effect of a wipe is worse, especially the position of the cross.

    2. Appearance defects: The wear resistance of the sewing agent is not very good, and it is not easy to be rubbed only when the base is laid. However, for ceramic tiles such as microcrystalline stone and fine-polished glazed tiles, making a perfect seam on the concave surface will make the foot feel uncomfortable.

    It's like a small gap of about 1 mm, and there is a high chance that it will not be able to adhere to the surface.

  4. Anonymous users2024-02-09

    Summary. There are two most likely reasons, one is because the application temperature is too low, or even in a frozen state, which causes the product curing process to be affected; Another reason is that the caulk used for priming is too dry and too absorbent, so that the solvent of the product is insufficient in the curing and shaping process, resulting in cracking of the construction surface.

    Therefore, the process of sewing construction is very important, and it is recommended that if you need to do sewing, you should choose some local service good sewing construction teams to carry out sewing.

    What is the reason for cracking after a period of construction with sewing agent?

    There are two most likely reasons, one is because the application temperature is too low, or even in a frozen state, which causes the product curing process to be affected; Another reason is that the caulk used for priming is too dry and too absorbent, so that the solvent of the product is insufficient in the curing and shaping process, resulting in cracking of the construction surface. Therefore, the process of sewing construction and scaffolding is very important, and it is recommended that if you need to do sewing, you should choose some local service good sewing construction teams to carry out sewing.

    Construction in the summer.

    The caulk used for priming is too dry and absorbent, so that the solvent of the product is insufficient in the curing and shaping process, resulting in cracking of the construction surface.

    The unprofessionalism of the beauty sewing was not handled well.

    The sewing agent used is also poor.

    Is there a problem with the quality of the sewing agent?? Not enough hardener?

    The caulk used for priming is too dry and absorbent, so that the solvent of the product is insufficient in the curing and shaping process, resulting in cracking of the construction surface.

    Yes, I've lived by myself for three years and haven't encountered this kind of broken seam.

    The sewing master has always emphasized that there is no problem with his construction process, not that there is a problem with my materials.

    That is, there is a problem with the material.

    How to solve it now? Dig it out for a change of material and redo it?

    Yes. Her floor tiles are covered with floor heating, and they have not yet started to use.

    The tiles on the floor heating can be sewn and the bridge can be sewn, so whether it has any impact depends on the material and quality of your wild reed. Inferior beauty sewing products are easy to crack and fall off. Suitable for floor heating and beautiful seams, you can choose epoxy colored sand.

    Epoxy colored sand has quite high stability. It has the advantage of strong adhesion, good ductility, and low shrinkage. It can withstand the harsh hot environment, and is also cold-proof and frost-resistant, so it can be said to be a special sewing agent for floor heating.

    What are the dangers of floor heating seams? When choosing a sewing agent with beauty, try to choose water-based, which almost does not contain materials that have the opportunity to be sent, and is more environmentally friendly than oil-based. When choosing a quality assured sewing product, first see if the sewing agent has a quality inspection certificate and whether it is qualified.

    Precautions during sewing should be noted during construction, although sewing requires a certain temperature, do not turn on the floor heating before sewing and before sewing is dry.

  5. Anonymous users2024-02-08

    <> won't drop. If the effect of the first application of the sewing agent is not good, you can apply another layer, but the color of the two uses should be the same, and the second time after the first time is dry. When using the beauty joint, the strength of the pressure gun should be consistent, and the speed should be slower, so that the beauty joint agent can penetrate into the tile joint, and the use of good beauty joint agent can increase the waterproof and moisture-proof effect of the tile.

    Use the seam to ensure that the cracks on the wall are dry and clean, and there are no oil stains. It is best to use caulk first to make a primer, so that the effect is smoother, and pay attention to not having sharp objects to destroy the surface during construction.

  6. Anonymous users2024-02-07

    Generally speaking, if you want to remove and refill a bad sewing agent, you can actually remove it. First of all, we have to inquire clearly, what are the ingredients of the beauty sewing agent currently used? We can use a wallpaper knife to gently cut the grout filled between the tiles and pull it out.

    Of course, if we are afraid that using a wallpaper knife to remove the grout will bring scratches to the tile and destroy its beauty, then we can choose to use a solvent to remove the grout.

    Generally, solvent-based cleaning items can dissolve the seam decorative, and then wash it with water, so that the gaps in the tile can be rinsed, but the use of solvent-based cleaning items is convenient and easy to use, but there are also shortcomings. Solvent-based removal items, in which a large number of chemical agents are added, will cause pollution of the room after use, so many netizens said that after using solvent-based removal items, it took nearly a month to open the window for ventilation to remove the smell of chemicals.

    Therefore, when we choose a sewing agent, we must identify the brand, and it is best to find a beauty sewing agent used by friends around us, and use a product with good praise, so that it is not easy to step on the pit, and it also avoids the need for secondary removal after choosing a bad sewing agent. In addition, we can also try to use the hot air of a hair dryer to blow the sewing agent softly, and then try to pull it up by hand, but this method is more tiring and requires little by little operation.

  7. Anonymous users2024-02-06

    Of course, you can pull it up, because the quality of these sewing agents is not good, so although they will be very hard after drying, they will not fit for a long time, as long as you pry it with a sharp object, it will get up.

  8. Anonymous users2024-02-05

    Yes, because it is not completely adsorbed in it, and it has no practical use, and the quality is very poor.

  9. Anonymous users2024-02-04

    It can still be dragged up, and it can also be scratched with a blade, so it is fine, and it is very convenient, but you should be careful.

  10. Anonymous users2024-02-03

    If the tile is uneven when paving, the tile is affected by the weather, and the brick is easy to cause peeling and cracking. If the hardness of the sewing glue is too high, it will also crack in the case of thermal expansion and cold contraction. Although the seam adhesive can be cleaned together with the tile, it is easy to fall off and be damaged after long-term wiping.

    Its waterproof performance is not very strong, it cannot be water-resistant for a long time, and it is easy to age and cause cracking when filling in areas such as bathrooms and kitchens. Before the tile seam, it is best to use an old brush or vacuum cleaner to clean the dust in the seam, otherwise it will affect the effect of the seam and reduce the durability. The in-seam is not cleaned up, which also causes cracking of the sewing glue.

    In addition, during the construction process, if the temperature of the sky mill is too low, the caulk will be dried to a large extent, the water absorption rate will be too high, the solvent will be insufficient after the colloid solidifies, and the surface will crack. If the caulk is too dry, it will cause the adhesive to become less ,..If you find that the peeling of the sewing glue is the most messy and stuffy, it is better to clean up the peeling part first, then use a hair dryer to dry the inside of the seam, and finally re-apply the sewing glue.

Related questions
7 answers2024-07-14

1. Prepare beautiful sewing tools, if you want to do a good job, you must first sharpen your tools. >>>More

7 answers2024-07-14

It may be that there is moisture in the gap, there is ash, the glue is too fast or too thin, or it may be the quality of the sewing agent, etc. In the case of bubbles, you can talk about the bubbles bursting, and then talk about the beauty of the sewing agent to fill and flatten.

11 answers2024-07-14

1. What is tile grout

Tile grout is composed of high-tech new polymers and high-grade pigments, which are finely formulated by high-tech new polymer materials + high-grade pigments and special additives. Tile grout is a high-end product for gap decoration, suitable for tile, mosaic and other gap beautification, kitchen and bathroom top decoration. The cost of one-component sewing agent is relatively low, and the relative cost of two-component is a little higher. >>>More

18 answers2024-07-14

Because the content of some chemicals in some beauty sewing agents is very high, it will make this taste particularly obvious, probably because the door gap is not particularly good, and the quality is also problematic.

6 answers2024-07-14

Beauty sewing agent. There are two ways to choose the color, one is the proximity method, which is to choose the beauty joint agent that is close to the color of the tile, and the second is the rebate method, which forms a strong contrast between the color and the color of the tile. It is recommended to use Keshun M200 green dazzling sewing agent, which has a fashionable color matching, long-lasting color locking, anti-fouling and easy cleaning, bright and beautiful, high-quality raw materials, and clear taste and environmental protection. >>>More