What problems should be paid attention to when tiling in the bathroom, and which details should not

Pay attention to tile paving and seam problems. The gap of the bathroom tile should not be too small, and the tile gap is too small to reduce the service life of the tile. Pay attention to the problem of tiling and caulking.

Pay attention to cleaning before laying tiles. When laying wall tiles, cement mortar is used as a binder, and the wall tiles have high water absorption. Please note that the tiles need to be soaked in water as needed.

Pay attention to the slope of the bathroom tiling.

The first thing to pay attention to when tiling the bathroom is the waterproofing problem, so be sure to waterproof the bathroom wall and floor before laying the bricks. Don't ignore the protection of the sun angle The sun angle of the bathroom wall tiles will be in the window and partition wall, and there are two problems to be solved in the treatment of these sun corners: one is to protect the yang angle and avoid the collapse of the angle, and the other is to compare the corner tip too forward; For the protection of yang angles, the common practices are yang angle strips and begonia horns.

Pay attention to the waterproof object, pay attention to the treatment of the wall, need to level, be sure to pay attention to the choice of tiles, you can add some tile glue.

It is necessary to pay attention to the way of tiling, the treatment of tiles, the protection of tiles, the waterproofness of tiles, moisture-proof, and waterproof toilets.

It is necessary to pay attention to the selection of suitable tiles, pay attention to the waterproofness of the tiles, confirm whether the edges and corners are moisture-proof measures, do a good job in material treatment, evenly distribute, and measure the size.

It should be noted that the seam left should not be too small, because too small will weaken the service life of the tile, and after the tile is pasted, the joint should not be hooked immediately, but the wall should be cleaned first.

In China, it is generally customary to paste the tiles to the top, generally, according to the specifications of the tiles. Overseas is usually a half-wall tile, and the actual effect is also very good. If the cost budget is relatively limited, it is recommended to make a half-wall design scheme, which only needs to be pasted to the top of the rain shower area, which is more economical.

To make half-wall tiles do not have to use large specifications and models, stick to the ceiling sewer pipe, do not need to be fully pasted, and then do decoration ceiling. If you want to get the overall actual effect, the full paste is OK, so that you can maintain the comprehensiveness, and the toilet is more wet and cold, and the full paste can be more reasonable with waterproof effect. Fill in a little, whether it is a full paste or a half wall, as long as the design scheme is good, it can be beautiful and generous.

After the moisture-proof of the bathroom is done, most of them can be used to paste the tiles on the walls and floors of the bathroom. Generally, after the pavement tiles of the bathroom are paved, the tiles of the wall are pasted, so as to avoid the destruction of the bathroom due to waterproofing. It is to paste the tiles on the wall of the bathroom.

Paste the tiles on the walls of all bathrooms to a certain height, after which the bricklayer can leave the field and let the carpenter enter to decorate the ceiling. It is the carpenter who enters and gradually decorates the ceiling. The relative height of the ceiling is based on the relative height of the wall tiles pasted by the bricklayer.

Since when decorating the ceiling, the relative height specification is the wall tiles, and the side keel is immediately assembled on the tiles. This allows the tile gaps to be concealed without causing consumption. The situation is that we are in the bathroom wall tiles immediately to the top, there are indeed these ways.

At this time, you don't have to take into account the relative height of the bathroom tiling, because you are glued to the top. The situation is that the relative height of the wall tiles in the bathroom is glued to the bottom of the decoration ceiling. At this time, people must determine the relative height of the wall tiles according to the height of the ceiling.

It is best to stick all the tiles to the roof, which is the top, and then you can do some curves in the middle, and some changes are more beautiful. By the way, bathroom waterproofing is very important. In general, the shower area must be more than 180cm.

Actually, it's to the top. If there is a bathtub, the relative height of the side of the tub should be 30 cm higher than the bath, and the rest of the wall should be 30 cm. The flowers on the wall of the wash basin and the adjacent wall should also be waterproof.

Be sure to pay attention to the size, pay attention to the color, pay attention to the waterproof, under normal circumstances, the tile must be to the top.

Be sure to pay attention to the choice of color, pay attention to the specific size, when paving, we must pay attention to the ratio of cement, it is best to pave to the top, so that it is more clean and hygienic.

1.The floor is deep and the walls are shallow, and the floor and walls of the bathroom are tiled. When matching bathroom wall and floor tiles, it is necessary to achieve the color matching of "deep floor and light wall", and avoid the combination of light floor color and dark wall color - it will make people feel top-heavy; If you don't know how to match the color of bathroom tiles, you can try the combination of floor gray and wall white.

The effect is versatile, and it is a good choice.

2.Choose tiles with low water absorption and high density. Car owners who don't know much may be a little confused.

They thought the bathroom was damp and had a lot of water vapor. Of course, they should choose tiles that are absorbent. Why should you choose tiles with low water absorption?

The bathroom is in a humid environment for a long time because of the high humidity and water vapor. When choosing, you should choose tiles with low water absorption and high density. Such tiles ensure that the moisture in the bathroom can be fully evaporated, leaving the bathroom in a dry environment.

Owners can put a few drops of water on the back of the tile when they buy it. Depending on the penetration rate of the water after dispersion, the slower the water absorption, the greater the density of the tile. This tile is suitable for laying in the bathroom.

3.Sunny corner protection. The sunny corner position of the bathroom wall tiles needs to be protected to avoid collapse and scratches caused by sharp corners.

Common ways to protect sheep's horns are sheep's horn strips and begonia horns. The way to protect the outer corner strip is to implant the outer corner strip at the outer corner position when tiling. The advantage is that it is simple and convenient, but it is not beautiful enough.

Begonia corner is the tile in the tile before the processing of 45 degrees of the bottom blank, and then put two 45 degree oblique bricks together, in the outer corner to leave a small missing corner, to make a beautiful seam, both beautiful and protect the outer corner.

4.Tiles need to be soaked in water. Ceramic tiles must be soaked in water.

Soak in water for more than 2 hours before paving, and take out the bricks to dry for later use. Tiles that need to be soaked in water should be completely soaked in water until no air bubbles appear. However, tile soaking generally occurs in the dry season, which can avoid the damage of tiles when they are laid.

The advantage of soaking in water before tile laying is that it can prevent the embryo body from absorbing water from the cement mortar after paving, which affects the adhesion.

1. The joints of the bathroom tiles can not be too small, the joints of the tiles are too small, and it is easy to reduce the service life of the tiles, and the tiles are cracked when they are heated and contracted.

2. Hook joints Now many workers are in the bathroom tiles after the paving immediately began to hook joints, so the treatment is very inappropriate, because the tiles are not completely dry and solid, in the process of hooking joints, it is easy to cause the tiles to loosen, and the later stage will cause the tiles to fall off, leaving potential safety hazards.

It is necessary to pay attention to the problem of size, the specific situation of tile adhesive, the treatment of gaps, the situation of hollowing, and the safety of the problem.

It is necessary to pay attention to the quality of ceramic tiles, but also to the way of decoration, to pay attention to the methods and skills of laying, but also to pay attention to waterproof, to pay attention to moisture.

When the bathroom is decorated, the wall needs to be tiled, because the bathroom is relatively humid and often uses water. Therefore, wall tiles can effectively prevent waterproof and moisture. But do we know how to paste the wall tiles in the bathroom, we know that this is also particular, what matters to pay attention to when pasting the wall tiles, these problems need us to understand, let's see.

When the bathroom is decorated, the wall needs to be tiled, because the bathroom is relatively humid and often uses water. Therefore, wall tiles can effectively prevent waterproof and moisture. But do we know how to paste the wall tiles in the bathroom, we know that this is also particular, what matters to pay attention to when pasting the wall tiles, these problems need us to understand, let's see.

How to paste bathroom wall tiles?

1. There is a traditional paving method: in fact, the straight line laying method is primitive and a traditional method. This method can be described as a classic, and it has been passed down to the present day, and I believe that it will still be maintained in the future.

The advantages of this method are: generous, decent, neat, and simple. Let the appreciator feel the strong texture of the floor tiles.

I-shape: The next step is to lay the floor tiles with a slightly more pulsating method. It is also a slight change from the traditional pattern. It is not laid in a straight line according to the traditional method, but modified into an I-shape, which is usually referred to as the I-shaped paving method.

2. There is a dislocation method: If you don't accept the traditional one, this I-shaped laying method feels okay, and it is not a hundred percent, so let's combine the two together to see if there can be a fresher approach. That's right, it's this kind of misalignment that is not right or straight.

Since it is quite jumpy, it is necessary to anticipate it before using it.

What are the precautions for tiling in the bathroom?

1. Pay attention to the spacing of tiles and the gap between tile particles, and after each tile is pasted, make sure that each place is compacted and fully combined with the adhesive. After about 30 minutes, the tiles can be soaked with a sponge or other brushing tools, and the paper can be soaked for about 5 minutes.

2. Before paving, use tile adhesive or white cement to plaster thinly once, and ensure that the surface of the substrate is flat, and then paste the mesh tiles on the wall, ground or countertop. When paving, pay attention to the consistency of the tile spacing and the gap between the tile particles, and each tile is neatly paved in the direction of the arrow marked on the back paper, and patted firmly with caulking. Because the tile pays attention to the use of color, the collage work must meet certain requirements.

3. There shall be no skewed, warped, hollow drum and other phenomena. The second wall skirt is allowed to be 2mm after the upper mouth is straight, and the surface of the tile should be neat, uniform color, tight caulking, and consistent depth, and there should be no alkali, stains, mortar flow marks, etc.

The above we introduce to you is about how to paste the bathroom wall tiles and the relevant issues related to the precautions for the bathroom tiles, the bathroom is necessary to paste the wall tiles, which can not only be beautiful, but also can be effectively waterproof and moisture-proof. Above we have introduced some methods and precautions about paving, which you can use as a reference.

There is more water in the bathroom, so the general user can carry out all the tiling treatment on the sanitary home when decorating, which can not only effectively waterproof, but also ensure the appearance effect. But there are many places that can not be ignored in the bathroom tiling, first of all, we should pay more attention to the selection of materials to ensure that the specifications of the tiles are consistent with the size of the bathroom, and the construction requirements are also very strict, because the tiles of the bathroom also have a waterproof effect. The following is some experience and knowledge of bathroom tiling.

Selection of materials

Many owners choose the tiles for the bathroom only according to their own preferences. In fact, the purchase of bathroom tiles needs to be selected according to the lighting, size and humidity of the bathroom, and the quality, size and radioactive health certificate of the material need to be seen when purchasing. Choose the color and surface of the tile according to the lighting of the bathroom.

If the lighting is poor, you should choose bright glazed bricks of beige and other rotten bright colors. Glazed tiles are divided into glossy and matte: glossy glazed tiles, which are suitable for creating a "clean" effect; Matte glazed tiles, suitable for creating a "stylish" effect.

Preparation for construction

When tiling tiles, the fit of the tile to the wall is greater than the gravity generated by itself. Because the tile itself has many small holes and strong water absorption, the dry tile will absorb the moisture of the cement, reducing its fit, and it is easy to hollow and fall off after paving. Therefore, the tiles must be soaked for 24 hours until there are no blisters, and then they must be dried before being paved.

Construction technology

When tiling and plaving, the humidity of cement mortar should be well controlled, too dry or too wet will affect the adhesion between the tile and the wall. Cement mortar needs to be evenly and fully applied behind the tiles, avoiding only the surrounding areas. After the tile is attached to the wall, it is necessary to use a rubber hammer to knock it down, and at the same time to check the tile application, add or reduce cement in time, this process needs to be repeated over the acres until the tile and the wall are evenly fitted.

Because the newly laid tiles, the cement is not completely dry and solidified, and it is easy to sink under the influence of gravity. Therefore, after the tiles are pasted on the wall, a certain gap must be reserved between the upper and lower tiles. If the retained gap is too small, it is easy to squeeze the glaze during thermal expansion and contraction, reducing the service life of the tile.

Post-protection

After the tiles are paved, some follow-up works will be carried out, in order to avoid scratching the tiles during the construction, the tiles must be protected after the wall paving is completed. Packing boxes can be placed on the tiles under the walls to avoid touching the brick surface when moving bathroom appliances and construction tools.

At present, bathroom tiles are generally set of tiles, there are many colors and types, and the color must not be too bright when choosing, and it is best to coordinate with the overall style. It is recommended to use lighter colors to create a clean and comfortable environment. Bathroom bricks need to be soaked in water before laying, so as not to absorb the moisture in the cement mixture and cause the tiles to fall off.

You can get it for free