-
Three ways to deal with the floor damp in an emergency.
In the southern region, typhoons are frequent in early summer and late autumn, heavy rains are continuous, and the weather is humid and humid every year, and careless owners accidentally forget to close the doors and windows or do not take good care of the floor. How to rescue the damp floor to avoid the fate of being replaced? Three ways to deal with the dampness of the floor in an emergency, so that the floor is not the pain of reinstallation.
The first trick: dry a rag to wipe off the water.
If a small amount of water is spilled on the floor and it does not stay for a long time, simply wipe the water off the floor with a dry rag. Because of the small amount of water and the short time, the moisture will not penetrate into the inside of the floor, and the impact on the floor is not large, so there is no need to be overly stressed.
The second trick: absorb the moisture of the air conditioner.
If the wooden floor is not very seriously flooded, use a dry rag to quickly absorb the moisture on the surface of the floor, and then use a vacuum cleaner to suck the moisture away from the joints of the floor. If the flooding area is not large, you can use a hair dryer to open the cold air gear to dry the gap, if the flooding area is large, after the water on the surface of the floor is absorbed, the doors and windows are tight, the air conditioner is adjusted to the lowest temperature, and the air conditioning cooling time can be adjusted to dry the floor within one day.
The third trick: bleach to deal with the poisonous spots.
If the floor is not treated in time after being damp, it is easy to develop mildew, and it will cause mildew in a large area after a long time. If you find a small amount of mildew on the floor, you can mix warm bleach and water in a ratio of 1:3 and wipe the floor with a damp rag until the mold is removed.
The concentration of bleach should not be too high, otherwise it will damage the floor wax on the floor surface. If the inside of the floor has become moldy, the moldy floor needs to be removed and replaced with a new floor to avoid infecting other intact floors.
-
The solutions to the moisture return of the floor are: laying moisture-proof mats, mopping the floor with salt water, laying waste newspapers, waxing, etc.
1. Laying moisture-proof mat: It can block the thermal exchange between the floor and the indoor cold air, and isolate a layer of uncirculated dead air between the indoor air, which can prevent the indoor water vapor from touching the ground, condensing into water droplets, and laying a moisture-proof mat is a good choice.
2. Salt water mopping the floor: first heat the water, wait for it to become a temperature that will not be hot, the water temperature is about 40 degrees Celsius, then add a spoonful of salt to the water, stir slightly, and mop the floor after the salt is fully dissolved. Soak the mop in hot salt water and wring it out as much as possible to mop the floor clean.
3. Spread waste newspapers on rough rottenness: Spread a layer of waste newspapers on the ground of the "wet entrance" such as the door, bathroom, and kitchen door, which can not only absorb the water and rock leakage on the ground, but also rub the water stains on the shoes when entering and exiting, and meet a variety of choices at the same time.
4. Waxing frequently: The most important thing in the daily maintenance of wooden floors is waxing. After a period of use, it needs to be waxed again, which can not only volatilize the moisture left by the construction, but also prolong the service life of the floor.
The floor should be waxed quarterly to keep the surface shiny and waterproof. <>
The cause of the resurgence of moisture on the floor
1. There is no moisture-proof layer under the floor during the decoration.
2. The moisture under the floor is too heavy, especially the floor with floor heating installed in the north is more likely to be wet.
3. When spring comes, the weather suddenly warms up, and the hot air will condense when it encounters the cold floor, and the floor is prone to dampness.
4. In continuous rainy weather, the air is relatively humid, and the floor of the room will be very humid due to the water brought into the room by people entering and exiting.
5. It may be that when cleaning the floor, the mop carries too much water, and the water on the floor is not taken off in time.
-
Floor moisture regeneration refers to the phenomenon of swelling, deformation and blistering of the floor surface due to the moisture of the floor. This not only affects the beauty of the floor, but also has hidden hazards to the home environment and the health of people around them. Therefore, it is necessary to deal with the problem of moisture regeneration on the floor in a timely manner.
First, the floor is cleared of moisture to reduce the likelihood of further moisture on the floor. It can be treated by wiping dry, water absorber, dehumidifier, etc. When drying the moisture on the floor, you should be careful not to use an excessively wet mop to avoid aggravating the problem of moisture regain on the floor.
Water absorbers and dehumidifiers are also effective tools for removing moisture from the floor, so be sure to use them frequently and keep them clean.
Next, the deformed and blistered floor is repaired, and the deformation and blistering are the most obvious problems in the whole process of the floor rejuvenation. Depending on the degree of deformation and blistering, the appropriate repair method can be selected, such as sanding, replacing individual flooring slabs, filling with adhesives, etc.
Finally, it is necessary to ** the cause of resurgence and take steps to avoid recurrence. You can check whether the ground drainage system is normal and avoid placing items with too much water for a long time, such as flower pots or drinking fountains. In addition, when necessary, the installation of moisture-proof materials on the floor can also effectively prevent the problem of moisture regeneration on the floor.
All in all, floor moisture regeneration is a very common problem in the home environment, which must be solved in time by removing the moisture on the ground, repairing the deformed and blistered floor, ** the cause of moisture relapse and taking corresponding measures, so as to effectively maintain the beauty and life of the floor, and bring elegance and warmth to the home environment.
-
Floor moisture re-moisture treatment methods include the use of quicklime powder, laundry detergent, charcoal dehumidification, air conditioning dehumidification, and the use of dehumidifiers.
1. Use quicklime powder.
In the case of moisture return to the floor at home, you may wish to consider placing some quicklime with stronger hygroscopicity than Huichun, because quicklime contains calcium oxide, which can react with water, and is one of the best desiccants. Placing it all over the room, or in a plastic basin, or in a damp corner, is a great way to help dehumidify your floor.
2. Dehumidify laundry detergent.
Pour an appropriate amount of laundry detergent into a dehumidification box, or put it in a plastic bag, and then poke a few small holes in the top, and place it in any corner that needs to be dehumidified.
3. Charcoal dehumidification.
If the floor at home is back to moisture, you may wish to use bamboo charcoal or charcoal to absorb water vapor, and it also has the effect of deodorization. It is better for small areas to be dehumidified. It can be dried and reused, so it does not damage the floor and is environmentally friendly.
4. Air conditioning dehumidification.
We can turn on the air conditioner for dehumidification, which can not only alleviate the phenomenon of damp floor at home, but also prevent dampness on household appliances and computers.
5. Use a dehumidifier.
The most convenient way to return moisture is to use a dehumidifier or turn on an air conditioner from time to time to extract moisture from the air and dry out the wooden floor.
Relevant experts pointed out that due to the characteristics of the solid wood floor itself, once the installation and use are improper, even fully qualified products will have quality problems, so the maintenance of the floor is very important. >>>More
First, after all, post-rescue is passive, and taking precautions is the best choice. Usually, pay more attention to the window not to open wide to prevent rain; When you go out of the bath and enter the bedroom, you have to change your shoes; Always check the air conditioner, plumbing pipes, and washing machine for water leaks. At present, the floor wax mainly plays the role of cleaning and maintenance, can not be waterproof soaking, the best preventive measure for soaking in water on the wooden floor is to use the floor protection film, it has a long service life, no damage to the floor, and also saves the trouble of changing shoes at home. >>>More
Here's how to deal with it:1. If the soaking of the composite floor is not very serious, then you can use absorbent tools to absorb the moisture on the surface of the composite floor, such as dry rags, sponges, vacuum cleaners, hair dryers, etc. If you use a hair dryer, use cold air to prevent the floor from deforming. >>>More
Now there is a special wood floor repair agent**, spray on the scratches of the wood floor, and wipe it with a dry cloth later, and the color and finish will be almost the same as new. >>>More
First of all, the first thing to do before going to work every day is to turn on the photocopier to warm up, which can be used to dry the moisture and small water droplets inside the equipment; >>>More