How to adjust the steering wheel of the Nissan Sylphy?

Including car steering machine damage, toe value is not correct, pendulum damage and so on, the following specific analysis.

1. Damage to the steering gear of the car:

When the steering mechanism of the car is damaged, the car will have symptoms such as difficulty in steering or the direction cannot automatically return to normal. In this case, the gap of the steering machine should be readjusted, and lubricated with lubricating oil, if the car steering wheel still cannot be corrected, it should be checked by a professional in a repair shop or 4S shop.

2. The toe-in value is incorrect

If the car does not do four-wheel alignment after replacing the tires, the toe-in value of the car tires is wrong, the tires on both sides will not reach the parallel state, and the car will not automatically return to the right due to resistance when steering. In this case, the vehicle should be re-aligned and the toe value adjusted.

3. Damage to the pendulum

If the pendulum of the car is damaged, it will aggravate the wear and tear on the inside of the vehicle's tires and affect the automatic centering function of the steering wheel. In this case, replace it with a new pendulum glue.

Things to note about car steering machines:

1. When the car is parked, the steering wheel should be corrected, otherwise it will cause resistance to the steering machine, which will affect the life of the steering machine for a long time.

2. After the car replaces the tires, do the four-wheel alignment in time and check the steering machine.

3. Lubricate the parts of the steering machine on time.

What's going on with the steering wheel not right.

1. The steering wheel is not correct after the vehicle is used for a period of time, which has a certain relationship with the tire pressure, tire wear, wear and tear of various parts of the chassis, and four-wheel alignment. If the tread pattern of the two front tires is not worn consistently, it will also cause the vehicle to deviate.

2. If there is no problem with the tire, it is recommended to go to the 4S shop to check the use of various parts of the chassis, the value of the four-wheel alignment will also lead to the problem of improper steering wheel after using it for a period of time, and it is also possible that the cross tie rod is offset to one side and causes the steering wheel to be wrong.

The steering wheel of the car needs to be adjusted in time, otherwise the potential safety hazards are great when driving, and it is very easy to have some collisions.

The difference between a misaligned steering wheel and a mistracking:

Deviation does not necessarily mean that the steering wheel is not right, and the steering wheel is not necessarily wrong, and the two can also coexist, both deviation and steering wheel error. I have encountered someone who said that the steering wheel is not correct as deviation, because after he hit the steering wheel horizontally, the car will run to the side, and he thinks that it is misaligned, but in fact, it is just that the steering wheel is not right.

Therefore, if you want to know whether your car is off, then find a relatively straight and flat road with few vehicles to try, it must be a flat road, potholes are not allowed, because the wheels will change direction when they press over potholes and bulges, and some roads will also have errors in the middle high and low in order to drain water.

Hello, this suggests that you go to the repair shop to do a four-wheel alignment, mainly caused by suspension deformation or loosening!

The aspect plate is generally affected by the chassis problem, and the chassis should be dealt with first and then positioned.

It is caused by the poor working performance of the spiral cable at the lower part of the steering wheel or the problem of false connection. Improper use causes the keys to be damaged and malfunction.

Because the multi-function steering wheel button is connected by the airbag slip ring line, the corresponding fault code will be stored inside the electrical control unit, and it is recommended that professional maintenance personnel follow the fault information to eliminate it.

Product advantages of multi-function steering wheel:

The driver can directly control a lot of electronic devices in the car on the steering wheel, and there is no need to look for various buttons on the center console, so that he can focus more on the front and greatly improve the safety of driving. This was originally a mid-level car, but with the advancement of technology, it has gradually shifted to family cars. Many compact cars launched in 2013 are equipped with this feature.

Although most of it is limited to sound control, it provides a lot of convenience and pleasure for a family car.

Button failure on a car's steering wheel can be troubleshot in the following ways:

1. Functional failure, the multi-function steering wheel of the general vehicle has the functions of adding or decreasing the multi-level volume, Bluetooth mobile phone calling, and the advance and retreat of multi-** tracks, and when these functions fail or are abnormal, you can manually operate the multi-key button of the center console or the knob of the same function button on the touch screen to verify whether it is a functional failure.

2. Mechanical failure, the button is a consumable component, which will be worn out in use and shorten the life, and it is not excluded that the function failure and uncontrollable quality caused by unreasonable quality and design and immature process cannot be ruled out. When the first functional verification passes, you can focus on checking the buttons.

3. Circuit failure or connector failure, the keys are all connected with the corresponding matching circuit and the electronic and electrical connection of the central control, connectors, etc., the use of the unsuitable environment caused by the accelerated oxidation of the connector, the aging of the line, the oxidation of the key contact, the need for short connectors, virtual open circuits, etc. will lead to the failure of the keys. It is recommended to use a special electronic instrument to check whether the circuit connection is abnormal.

What is the navigation, see where to install where to let him go, if it is a special car is not possible to encounter this situation, do not rule out the problem of the machine, go directly to the installation of the place, the navigation of the 4S shop is generally installed by the dealer outside, the 4S shop is not installed at all, we are specially for the 4S shop to install the navigation.

You should go to the 4S store.

Don't do it yourself!

The reasons for the steering wheel sinking are: 1. Insufficient booster oil, 2. Tire pressure is too low, 3. Bearing fit is too tight, 4. Booster problem, which can be dealt with according to the actual situation.

1. Insufficient booster oil.

If it suddenly becomes very heavy one day, or slowly becomes heavier, it may be that the steering power oil is dirty, it is similar to the engine oil, and it needs to be replaced. Or if there is less oil leakage, then there is less power, so the steering wheel becomes very exciting. In this case, it is necessary to maintain it in time, or to add and change the steering oil.

2. The tire pressure is too low.

If the tire pressure is too low, the area of contact between the tire and the road surface will increase, the friction will increase, and the steering difficulty will increase, resulting in a heavy steering wheel, which is not conducive to driving safety.

3. The bearing fit is too tight.

For a rolling bearing connected to each steering system, it is also closely matched with the sliding bearing, so it will lead to the lubrication of the bearing can not be well run, which will affect the phenomenon of stagnation, causing the steering wheel to become sinking, this situation should check the mechanical part and the booster system, or rule out whether there is no lead leakage and damage to the inlet seal.

4. Booster problem.

The relationship between the steering wheel and the booster is inseparable, so when the steering wheel becomes very heavy, it is likely that there are some poor circuit contacts or other problems inside the booster system, which should be repaired by the 4th shop.

Nissan Sylphy steering wheel has no pullback: this may be a problem of inclination, need to do a four-wheel alignment, it may be that the steering rod on both sides of the tooth distance difference is too much, one side stretches very long, the other side shrinks very short, the tire is the front speed and camber is not adjusted well, the automatic return is to rely on the kingpin leaning and camber to cooperate, in this case if the steering wheel is on the right, that is to close the right, put the left. If there is no positive force because of the weight of the steering wheel, you need to solve the problem from the direction of the steering wheel, including checking whether there is dirt wrapped under the steering machine; Check whether the oil level of the steering machine is normal, and whether it has not been replaced for too long and deteriorated.

1. First of all, you need to park the Dongfeng Nissan Sylphy car in a safe place, and then you can adjust the steering wheel.

2. Find the adjustment switch directly below the steering wheel of Dongfeng Nissan Sylphy Automobile below, see the figure below for details.

There is a handle on the left, break down, and then you can adjust it at will. Push him again and lock it. Go.

Kiss! I changed the steering oil! Check the front shock absorber flat bearings again.

The first is to see if the belt of the direction booster pump is broken, the second is to see whether there is a lack of oil, and the third is that the direction booster pump is broken.

The reasons for the deviation of the steering wheel of the Nissan Sylphy may be the following: The most common reason for the deviation of the direction is the incorrect inclination angle of the four wheels, and it is recommended to correct the alignment of the four wheels. Check whether the air pressure value on both sides of the tire is too different, and the air pressure value is too different and will deviate when rolling.

In addition, check whether the tires are abnormally worn, and check whether the thickness of the tires on both sides is consistent.

The cushioning on both sides of the front shock absorber spring is inconsistent, and the quality of the anti-Li shock spring can be judged by pressing or comparing after disassembly.

The failure of the front shock absorber leads to the two suspensions, one high and one low, and the force is uneven and uneven.

If a single wheel has brake lag, and the brake is badly returned after pressing the brake pedal, and the force is always applied to the left wheel, then it has been running to the left.

The design of the highway is to use drainage, there is generally a certain inclination, but the angle is very small, and it is normal to have a little deviation after driving a distance with the vehicle.

If the above problems are ruled out, it is a design problem of the vehicle itself, because there are still many examples of Sylphy mistracking.

Millions of car purchase subsidies.

There is a lock lever under the main driver's steering wheel. Pull up the locking lever to adjust the height of the steering wheel. Once adjusted to the correct position, firmly press the lock lever to lock the steering wheel.

At first, the car was steered by the rudders. The severe vibrations generated by the car are transmitted to the driver, making it more difficult to control the direction. When the engine was changed to be mounted on the front of the car, the driver could no longer use the rudder to drive the car due to the increase in weight.

This new design of the steering wheel came into being. The gear system introduced between the driver and the wheels is flexible and provides excellent isolation from severe vibrations on the road surface. Not only that, but a good steering wheel system can also give the driver a sense of intimacy with the road.

Generally, the steering wheel is connected to the steering shaft by means of a spline, and its function is to convert the force exerted by the driver on the edge of the steering wheel into torque, and then transmit it to the steering shaft. When using a larger diameter steering wheel for steering, the driver's hand on the steering wheel can be less forceful. The steering transmission shaft is used as a sun-draft connector between the steering gear and the steering shaft, which is conducive to the versatility of the steering gear, compensates for the error generated during manufacturing and installation, and makes the installation of the steering gear and the steering wheel on the whole vehicle more reasonable.

Millions of car purchase subsidies.