When decorating, how should floor tiles be chosen? What to look out for?

Nowadays, in the case of interior decoration, many people still choose floor tiles in the selection of wooden floors, which are loved by you because of their wear-resistant and easy-to-clean characteristics. However, there are advantages and disadvantages of floor tiles, buy poor floor tiles, and suffer from the interior decoration after themselves, so in the process of buying floor tiles, we must pay attention to three common problems, they are: to see if the main color of the floor tiles is pure, pay attention to the thickness of the enamel layer, and detect water.

In the case of the purchase of floor tiles, it is very simple to see whether the main color of the floor tiles is pure, mainly to see whether the color of the surface of the floor tiles is uniform. Better quality floor tiles, white tones are well-proportioned and corresponding. Observe the particle size of the particulate matter in the cross-section of the floor tiles.

It should be noted that the cross-section mentioned here does not refer to the laser-cut surface around the floor tiles, but to the cracking of the floor tiles. As a rule, the fracture is delicate, hard and brittle, and the tone is consistent. Because the fine particles in the middle of the brick cannot pass through the relatively large particles, water is very easy to affect its quality.

At the time of the purchase of floor tiles, you should also pay attention to the thickness of the enamel layer, and the thickness of the glaze is the thickness of the cross-section of the silk coated wire. Tang porcelain is a valuable raw material in tiles. The thicker the enamel, the better the quality.

You can listen to the sound of knocking on the floor tiles to see if it is clear. If the sound is clear and comfortable at the top, it is better, and if it is a low sound, it is a defective product.

In the case of floor tile purchase, customers can pour some water on the reverse side of the wall tile and pay attention to the rate of moisture absorption of the floor tile. After a few minutes, look at the marks left by the water on your face. The floor tiles that slowly infiltrate after water dispersion have a high density and insignificant water retention solubility, so they are considered to be good products.

In the process of carrying out the purchase of floor tiles, pay attention to the above three common problems, can help the floor tiles to buy higher quality, more cost-effective floor tiles, and the role of interior decoration will be better.

When decorating, you should choose the floor tiles that are in line with your overall home decoration style, and choose the floor tiles produced by big manufacturers and brands, except for the bathroom, the size of the floor tiles in all the spaces in the home should be selected as much as possible, and some durable and cost-effective floor tiles should be selected; It should be noted that it is necessary to measure the area of the home before deciding how many floor tiles are needed before purchasing, so as to avoid wasting money by buying more floor tiles, and you also need to choose the right floor tiles according to your budget.

When choosing floor tiles, you should choose some well-known brand tiles, which should be easy to take care of, but also wear-resistant, acid-resistant, high-temperature resistant, and waterproof; It is necessary to pay attention to the selection of wear-resistant, acid-resistant, alkali-resistant, impermeable floor tiles, bathroom floor tiles can not be selected, the same general kitchen and bathroom will choose polished tiles, living room will choose tiles, and you should also pay attention to the color and size of floor tiles.

First of all, it is necessary to determine the decoration style, choose the color and style of the floor tiles according to the decoration style, do not choose the first too high for the floor tiles, choose some durable, and good gloss; When buying floor tiles, you must have a good understanding of the overall space at home, buy enough floor tiles, try not to buy more, and be careful not to cause waste.

1. Look at the appearance of the tiles.

The color of the tile should be uniform, the surface finish and flatness should be good, the four sides should be neat, the pattern should be complete, and there should be no defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound of tiles.

Tap the tile with a hard object to listen to the sound, the crisper the sound, the higher the degree of porcelainization, the better the quality; The dull sound is evidence of poor quality tiles.

3. Drip test.

You can drop water on the back of the tile to see the speed of infiltration after the water spreads, generally the slower the water absorption, the greater the density of the tile; Conversely, the faster the water absorption, the more sparse the density.

4. Measure the tiles.

The higher the accuracy of the side length of the tile, the better the effect of the paving, and the purchase of high-quality tiles is not only convenient for the construction party, but also can save man-hours and accessories. Use a roll ruler to measure whether there is any difference in the size of each tile, and the higher the accuracy, the better.

5. Feel the hardness.

Observe the hardness of the tile, scratch each other with the edges and corners of the tile fragments, and see whether the broken fragments are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder, the former is of high quality, and the latter is of poor quality.

Now we are demanding higher and higher for the quality of life, and the choice of floor tiles is also very strict, hoping that the sedan car does not choose the floor tiles to make the house look cleaner and tidy, in addition to the wear resistance and good cleaning of ceramic tiles is also more concerned by many owners, so how to choose floor tiles for our home decoration? What are the matters and details that need to be paid attention to when choosing floor tiles? Today, let me share with you some relevant knowledge about floor tiles.

1. How to choose floor tiles for home decoration.

1. Appearance. When we choose floor tiles, we must first observe from his appearance, if the color and color of the floor tiles are uneven or the surface is uneven and there are a lot of particles, such floor tiles are unqualified, and it is easy to warp up in the process of use. At the same time, we will take a few more floor tiles and compare them with each other to see if their colors will have color differences and deformations.

2. Sound. In the second way, we can discern the quality of the tile by sound. We can use something a little harder to hit the floor tiles.

Observe whether the sound heard is crisp, the more crisp the tile porcelain degree will be higher, if we knock when the sound is still muffled or more turbid, such floor tiles are of certain quality problems.

3. Hardness. If the quality of the floor is relatively high, its hardness is also relatively high, it is not easy to break, and its instructions for use will be longer.

Second, the precautions and details of choosing floor tiles.

1. See if the appearance is uniform.

We can carefully observe whether the surface of the floor tiles is smooth and flat, and whether there will be unevenness.

2. Listen to whether the sound is crisp.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. If the sound is very low or muddy, it is not recommended to buy such floor tiles.

3. Drip test density.

We can place water droplets on the back of the floor tiles and observe how quickly the water droplets disperse. Generally speaking, the slower the water absorption, the greater the density of the living room tiles; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

4. Whether the ruler is measured.

The size of the same batch of tiles is consistent, if we measure multiple tiles and observe that there are some large errors in their size, such tiles are unqualified.

The above is how to choose floor tiles for home decoration, precautions and details of floor tiles to share for you, I hope it will help you. If you want to know more about choosing floor tiles, stay tuned.

First, look at the appearance.

The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

3. Drip test.

You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

Ceramic tiles can be divided into glazed tiles, full-body tiles, polished tiles, vitrified tiles, ceramic mosaic tiles, etc. 1. Glazed bricks:

Refers to a brick with a glazed layer burned on the surface of the brick. There are two types of such bricks: one is fired from clay; The other is fired with porcelain clay, and about 80% of the current home decoration buyers choose this brick as the ground decoration material.

2. Full-body brick: This is an unglazed porcelain brick, which has good slip resistance and wear resistance. Generally speaking"Non-slip floor tiles"Most of them are all-over bricks.

3. Polished brick: The whole brick becomes a polished brick after polishing, which has a high hardness and is very wear-resistant. 4. Vitrified bricks:

This is a porcelain tile fired at high temperatures, which is the hardest type of tile. 5. Ceramic mosaic brick: also known as mosaic, with many specifications, thin and small, hard texture, acid resistance, alkali resistance, wear resistance, no water seepage, strong pressure resistance, not easy to break, and various colors.

6. Vitrified bricks: It is to add quartz crystals to the polished bricks. When using vitrified bricks, in order to prevent dark water from falling on the bricks and seeping into them, the first time to clean the wax once (must be good wax technology), the micropores on the brick will not seep again after being sealed, and then hit is just a matter of beauty, add water and anti-slip.

Types and specifications: decorative bricks used for wall decoration can be divided into two categories: the first type is glazed bricks.

The surface of this brick is coated with a layer of colored glaze, which is processed and fired, and the color changes are rich, especially easy to clean and maintain, and is mainly used for wall decoration in kitchens and bathrooms; The other type is the whole body wall tile, which has a hard texture, good impact resistance, anti-aging, and does not fade, but it is mostly a single color, which is mainly used for the decoration of balcony walls. The shape of ceramic glazed tiles is mostly rectangular, and it is erected and pasted when used, which can increase the visual height after decoration. The whole wall bricks are mostly long-shaped, and they should be pasted horizontally when used, giving people a sense of stability and steadfastness.

Ceramic wall tiles are an indispensable wall decoration material in home decoration. Ceramic wall tiles have low water absorption, strong anti-corrosion and anti-aging ability, especially their special moisture resistance and scrub resistance, which cannot be replaced by other materials. It is inexpensive and colorful, and it is an ideal decoration material for kitchen, bathroom and balcony walls in home decoration.

Quality appraisal: The quality appraisal of ceramic wall tiles should mainly master the following points: 1

The quality inspection certificate and quality inspection report of the product should be requested from the dealer. 2.Conduct visual inspections at the site.

Observe whether the product has obvious quality defects such as missing glaze, spots, cracks, and ripples, and the above defects can never be selected. 3.Inspect by hand.

After sandwiching two bricks with fingers, hitting each other, the sound is crisp and loud for qualified products, and the sound is low and dull, and there must be inherent quality defects. 4.Distinguish color differences.

Due to the large number of wall tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected, and all packaged products should be sampled and compared, and the changes in color difference should be observed. 5.To inspect the specifications and sizes one by one, size error, flatness, etc., large size deviation will not only increase the difficulty of construction, but also poor effect after decoration, and can not be used in the project.

To put it bluntly, look at **, you get what you pay for. But be careful. Generally, home decoration can choose 60-80 flat

It's up to you to see what kind of style you like. My house was renovated last year, the kitchen used brighter white wall tiles, and the bathroom used all-porcelain antique tiles. If the funds allow, buy the brand, it is best not to buy ** products (most of them are a bit problematic). I suffered some losses.

Go more, see more, compare more... Choose a more famous one, quality ***... Or your local brand ...