Bathroom decoration is very important, why is the bathroom decoration backfill? What do you need to

It is a new material, compared with some traditional Chinese building backfill materials on the market, it has good strength and durability, so it belongs to a low-carbon and environmentally friendly backfill material. The use of it can make the concrete produce some countless independent small air holes, and do not communicate with each other, and the adhesion to the wall is also particularly strong, and its overall strength of water repellency characteristics is also very good, which immediately eliminates the need for the second moisture-proof operation of the plastering layer.

The application of Wei Fill will make the whole look very comprehensive, the integration of the on-site integral pouring construction and the middle of the main structure is also very close, and the sinking box does not need to do secondary drainage holes, so that the secondary drainage holes can be directly blocked.

It is very energy-saving and environmentally friendly, its raw material is plastic, just add some raw materials to the epoxy cement, the product is regarded as neutral, and it does not contain some harmful substances such as benzene and formaldehyde, so it is immediately inevitable to harm air pollution.

Its circulation is more appropriate, if it has not been formed before it has strong circulation, then the construction of the caisson waterproof layer of the bathroom has not reached every dead angle, and the drainage pipe is included in the room as a whole, which immediately increases the service life of some of the water pipes, if there is a small amount of leakage in the water pipes, it will also have a certain blocking effect.

What do you need to pay attention to in the backfill of the bathroom: it is proposed that some waste on the construction can not be used, because there are some decoration companies that do not meet the standards or decoration workers who do not have a sense of responsibility, it is very likely that some construction waste will be used directly, and the owners who do not know how to do it are easy to be deceived.

The general water absorption capacity of this kind of construction waste is not very good, if it is used as a backfill material, it is easy to leak for a long time, and its net weight is also a little heavier, which immediately increases some of the load pressure of the bathroom, even if it is overhauled in the later stage, it is more complicated. If you use backfill material, you must make a good budget for the cost, because its raw materials are more expensive.

In this way, in order to carry out leveling, we must pay attention to the selection of materials for backfilling, and we must not use construction waste for backfilling.

In the process of bathroom decoration, the toilet backfill is to make the drainage performance of the bathroom better, so that it will be more convenient in the process of future use.

Backfilling is because the building may have sharp points The building may have sharp points and other problems, and it is necessary to pay attention to waterproofing and moisture resistance, etc.

The first type of most commonly used sunken restroom backfill material is ceramsite. Ceramsite is also a granular material that is professionally used for backfilling, which is water-permeable and breathable, so it is very suitable for caisson backfilling in sunken toilets. The best soil, cheap and vast resources, if you need to use secondary construction in the future, it is also convenient and fast to remove!

The ceramsite is light in weight, smooth in surface, and also has the function of odor absorption and water absorption, which can ensure that the caisson is dry and odorless. The overhead is a pre-cast cement slab, and then erected on the caisson, the construction is very convenient, and the pipeline and waterproof layer below the caisson are not affected.

Previously we were the most common. It is to use construction waste to break it up and spread it under the bathroom. The advantage of this is that it saves time, effort and money.

The construction waste of your own home is transported downstairs, and you also need to pay for hoisting. The bottom of the caisson of the original bathroom is waterproofed, and the closed water test is done to ensure that the original main structure is waterproof and does not leak. It is important to leave a secondary drain at the lowest point to avoid the water in the caisson not being discharged.

Reserve a good drainage pipe hole, first find a ramp flat, the same as the funnel, and then brush a waterproof, get a good test of water for 48 hours, use bricks to build the field grid, get the site at the same time cast-in-situ board, the best to put ten thick steel bars in the board, and cover the plate after getting it. One of the materials used in bathroom renovation backfills is ceramsite, which many homeowners have chosen for their renovations. It has the advantage of good odor absorption and water absorption, and it is also relatively lightweight.

Suitable for backfilling in toilets.

Bathroom backfill selection of construction waste is relatively more cost-effective, decoration of the house will remove some wall walls, will remove a lot of construction waste residue, with these waste residue directly backfill the bathroom, save money, time and effort! However, the residue is relatively heavier than other materials. Before the ceramsite is backfilled, it must be built with bricks to form a tic-tac-toe grid, which can prevent the ceramsite from sliding and causing the ground to sink.

In addition, the soil in the ceramsite needs to be washed clean before construction. Lightweight material backfill: It is best to use pearl cotton ceramsite or foam bricks, plus sand and cement backfill.

This way is the best way, but it should also be slightly higher. Because it is quite expensive to use pearl cotton ceramsite or foam bricks.

Ordinary red bricks are fine for backfilling, red bricks are durable and very strong.

Ceramsite is the best material for backfilling the bathroom, it is lightweight, there are micro-porous ceramic particles inside, which can absorb moisture, and its structure is also very round, so you don't have to worry about damaging the waterproof layer, and it is also very convenient for future maintenance.

In fact, the quality of this material is the best, and it can also play a very good role in decoration, and most people choose this material.

1. The material of the bathroom backfillSecond, the new toilet backfill material3. SummaryBathroom backfill, just use a relatively lightweight filler to fill the level, in the process of reinforcement can be used red bricks to build a nine-square grid and then backfill, or lay a layer of steel mesh on top to reinforce, the decoration process is more cumbersome, and the bathroom backfill line must be prepared for waterproofing, otherwise, in the later use will not only affect their own home, but also may appear leakage.

What needs to be used is cement ash, bricks, stone ash, and some decoration garbage is also needed, as long as it can meet the needs of bathroom backfilling, these things will be used, there is nothing to buy, only these decoration garbage can be.

Ceramsite, lightweight material, Guweibao, back, slag, waterproof board. These are all things that may need to be used when making bathroom backfills, so I think these things should be prepared in advance.

The things that can be used are, wrenches, waterproof glue, glass glue, wires, waterproof pipes, floor tiles, tiles, these are all things that need to be used when backfilling the bathroom.

Slag, ceramics, charcoal, ceramsite, and some sand can also be used, these materials are particularly common and can be used to backfill the bathroom.

What material is good for bathroom backfill? What should I pay attention to when backfilling in the bathroom?

First of all, before backfilling the bathroom, be sure to paste a layer of concrete on the bathroom. This concrete is used to maintain the materials and walls of the toilet in case some damage occurs during the backfilling process. In addition, when backfilling, it is also necessary to strictly supervise the staff.

After all, in the case of filling in raw materials, there may be some situations where the amplitude is too large. At this time, it may be waterproof and cause damage to our bathroom, so many people will let a person keep an eye on their work when decorating. After backfilling, it is also necessary to maintain the toilet, otherwise it is easy to damage the wall.

When backfilling the bathroom, there are many raw materials that can be selected, and some gravel can be selected. However, the volume of gravel is very small, so it may require a lot of money. It is very simple to be able to choose some waste materials for backfilling, and compared with gravel, it is also relatively cheaper.

It is also possible to use a cement pressure plate to backfill, but before using this method, you must think clearly, because it may attract some rats, or some harmful small bugs. It is also possible to backfill with some lighter raw materials, which are very light and very durable.

Some friends may be very curious, why do the toilets need to be backfilled? What does backfilling do? If you look closely, you can probably find out the reason.

At the time of handing over the house, you will find that the pavement of the bathroom is much lower than that of the ordinary floor. Under this premise, we should carry out backfilling for him. Otherwise, there may be some anti-tide phenomenon in the process of using it in the future, and it will also make it very inconvenient for us to live in the situation.

Ceramsite is the best backfill material when backfilling. Ceramite is a granular substance with a hard shell, microporous interior, and a layer of waterproof and air-retaining glaze attached to the surface. Compared with construction waste, there is no threat to water pipes; Compared with cement sand, it will not cause overload; It has better water absorption as compared to cinders.

When backfilling, pay attention to whether there are debris, large pieces or sharp objects in the ceramsite, if so, you must pick out these large pieces and sharp objects.

You can use some ceramsite for backfilling, and you need to pay attention to the use of concrete when backfilling, you need to pay attention to the size, and you need to pay attention to important issues.

What materials to use can be chosen according to your own needs, and you can use whatever materials you need.

There are many people who use ceramsite, so you must pay attention to safety when backfilling.

Ceramsite bathroom decoration backfill material is one of the materials is ceramsite, ceramsite material is also used by many owners, his advantage is odor and water absorption, weight is also relatively light. It is more suitable for backfilling the settling tank in the bathroom.

1. Ground materials.

The ground should be made of waterproof, dirt-resistant, non-slip granite, etc., the height should be 10---20mm lower than other ground, and the floor drain should be about 10mm lower than 10mm to facilitate drainage.

2. Top material.

The top surface is affected by water vapor and is most prone to mold, so it is better to use waterproof and heat-resistant materials. Generally, colorful aluminum gusset and acrylic molding ceiling are used, these materials have strong water resistance, and the surface is pasted with thermal insulation materials, which is an ideal material for bathroom ceilings, and the specifications are mainly 120mm wide strips and 300mm*300mm squares, and the surface structure has two kinds of flat and micro-hollow. Acrylic molded ceilings** are low, but are susceptible to aging; Colorful molded aluminum gusset is high, but the color is diverse, durable, and is the main material used in modern bathroom ceilings.

In addition, there are also the use of aluminum-plastic panels or calcium silicate boards, the latter is coated with cement paint, which is low and waterproof.

3. Wall materials.

Bathrooms have the largest wall area, so they must be made of materials that are waterproof and resistant to corrosion and mildew. Easy to clean tiles, marble, mosaics and other colors, can collage rich patterns, and smooth and easy to dry, is a very practical wall material, but pay attention to the color of the ground material unity.

4. Sanitary ware.

The countertop of the sink is generally made of natural or artificial marble and granite, the cabinet body of the washbasin is generally made of moisture-proof board, and the basin is mostly made of ceramic, and there are also tempered glass and stainless steel materials. Toilets are divided into squatting toilets and seated toilets. Squatting toilets should consider whether they should be equipped with a trap, the way of water inlet and outlet, and whether the flush valve is open or concealed.

The sit-down toilet should be easy to maintain, not easy to damage, and the water tank should be flushed well. Many domestic toilets are not large in size, considering the small area of domestic toilets. The imported toilet is generally "wide and fat", if the area allows, the imported toilet with better quality can be used.

As we all know, the kitchen and bathroom are to be backfilled, many owners are entangled in what materials to use to do backfilling, if they encounter irresponsible or want to profit from the decoration master, they may take advantage of our lack of attention to use construction waste to fill, for the owners who do not understand the ** is easy to be deceived. Moreover, the effect of construction waste as backfill material is very poor, because of poor water absorption, so it is easy to cause leakage after using it for a long time, and the weight of construction waste is also very heavy, especially after soaking, it will increase the burden of the kitchen and bathroom, and seriously lead to the bursting of the bottom water pipe, and the ground collapse of the kitchen and bathroom room.

Jiabeile toilet backfill construction.

Another friend said that the use of ceramsite to do backfill, although the effect is much better than the construction waste backfill, but the ceramsite backfill has two serious problems, the first is the first problem, using ceramsite to do backfill on the top will be more expensive, for the decoration budget is not enough for the owners of the owner. In addition, the ceramsite backfill construction process is demanding, if the decoration master found is not good, it will not meet the requirements of waterproofing.

What is used for backfilling in the kitchen and bathroom? It's all made of this material now.

So what material is suitable for backfilling in the kitchen and bathroom?

In recent years, Jiabeile has launched a H380 bathroom backfill treasure, kitchen and bathroom waterproof backfill integration, H380 bathroom backfill treasure is a new generation of cement spontaneous foaming additives, light and low shrinkage, impermeability and compression, easy construction, environmental protection and high efficiency, overall pouring molding, filling process can meet the requirements of anti-seepage, leakage and odor-proof, and completely solve the traditional backfill material shrinkage and sedimentation, leakage, Defects such as peculiar smell and complicated construction.

Characteristics: Product characteristics.

1. One-time pouring molding, simple and efficient construction;

2. Lightweight sound insulation, greatly reducing the load of the building;

3. Anti-cracking, low shrinkage, effectively reduce the settlement of the backfill layer;

4. Good compressive and impermeable effect;

5. Non-toxic, harmless, green and environmentally friendly.