The correct toilet seat installation method, how to install the toilet seat

Like the toilet seat, it is also very simple according to the method, you can screw the buckle under the toilet lid to him, and then buckle the cover into it, so that the toilet lid is installed.

How to install the toilet seat? Come and take a look, but don't say you won't install it.

To install the toilet seat, you need to remove the fixing bolts at the back of the toilet, remove the previous toilet cover, and then replace the new toilet seat with a fixed screw cap. At present, most toilet seats are large and small, as long as the screws at both ends of the toilet are done. However, the size of the toilet bowl must be measured before changing the toilet lid, and the width and length of the screw cap from the toilet lid also need to be determined.

So as not to buy products that do not fit.

If the toilet is not installed, you can install the toilet lid on the back of the toilet, which is more convenient and convenient to install, but if the toilet has been installed and fixed, it is necessary to dig out the installation from the back side, which is more awkward, but it can only be installed in this way.

When installing the toilet seat, some toilet seats are fixed with screws, so you only need to find the screw cap, unscrew the screws with a wrench, and replace them with new ones. The screw cap installed in the open place is easy to unscrew down directly, and the screw cap installed in the dark place is not visible, and it is generally located on the side of the water tank in the toilet, and it can generally be found by touching the direction of the water tank after opening the lid.

Generally, the installation method of different styles of toilet covers is also different, and the position of the bottom end of the toilet lid connected to the toilet bowl is fixed with screws, as long as the hand reaches to the rear position of the toilet, finds the screws on both sides and unscrews it, you can take off the whole cover, and then replace the toilet cover, this way is also simple.

Of course, if these simple removal methods do not work, it is recommended to find a professional repair and installer to replace the toilet seat, and remember not to forcibly disassemble it yourself.

Method 1 of installing the toilet seat.

Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 2 of installing the toilet seat.

Simply remove the fixing bolt on the back of the toilet to replace; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

The inside of the toilet seat is equipped with screw accessories, insert the screws into the screw slot behind the toilet seat, and then align the two small holes on the front of the toilet bowl, and then tighten the screws.

To install the toilet seat, you first need to remove the old toilet seat, then prepare the newly bought toilet seat, install the fixing plate with screws, and then push the toilet seat parallel to the fixing plate, the specific steps are as follows:

1. Remove the old toilet seat

Open the toilet seat, there are two buttons at the bottom of the toilet seat, everyone press and hold the toilet lid button to lift the toilet seat. Then we remove the decorative cap from the toilet seat fixture, loosen the screws of the fixture with a screwdriver, and remove the fixture. After the old toilet seat was removed, we wiped the toilet clean with a rag.

2. Buy a new toilet seat

When buying a new toilet seat, we need to use a ruler to measure the hole spacing, length and width of the toilet seat, and buy a new toilet seat according to the measured size. After the smart toilet seat is delivered to your door, we will take out the toilet seat and its accessories, check whether the toilet seat and accessories are damaged, etc.

3. Install the fixing plate

We put the fixing plate of the smart toilet lid with the hole of the toilet lid, we put the expansion screws and the card slot together, and then put them into the screw holes of the fixing plate, after we adjust the position of the card slot tooth wire, tighten the expansion screws with screws and fix the fixing plate.

4. Install the toilet cover

We press and hold the unlock button of the toilet lid while pushing the toilet lid parallel to the fixing plate, and then release the unlock button. After the toilet lid is fixed, we turn off the toilet valve, use a wrench to loosen the toilet valve hose and remove it, and then install the filter on the water valve, and connect the hose to one of the ports of the water filter. Then use a hose to connect the toilet lid to the water filter.

The steps of the installation method of the toilet lid are as follows;

1.Buying a new toilet seat Before we buy a toilet seat, we must first measure the length and width of the toilet seat, the hole spacing and record it. When purchasing a toilet, you can inform the merchant of these measurement data, and the merchant will help you choose the appropriate size and specification of the toilet seat, so that there will be no problem that the toilet seat and toilet size do not match and cannot be installed.

2.Remove the old toilet seat If the old toilet seat in your home has not been removed, you should remove it. We first open the toilet seat, then touch the lower part of the toilet lid near the water tank, we can feel the fixing screws of the toilet seat, and finally we rotate the screws to remove it, and then hold the toilet lid with both hands to lift it.

3.Install the toilet seat fixing plate We first wipe the toilet bowl with a rag, then align the fixing plate of the toilet seat with the toilet seat mounting hole and place it, the next step we put the screws into the card slot, and then put the card slot on the fixing plate. When installing the card slot accessories, the screws should be inserted into the installation hole of the toilet cover, and the card slot should be placed in line with the fixing plate tooth wire.

Finally we use puffing.

4.Installing the toilet lid We lay the toilet lid flat on the toilet bowl, press and hold the unlock button on the toilet seat, and push the toilet lid in parallel so that its plastic card slot is pushed onto the fixing plate. Once the toilet seat is installed, we plug the smart toilet seat into the outlet.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

Families living in buildings will have toilet installation, but there are different types of toilets, so there will be different places when installing, so that there are some things we need to understand in advance, but the installation of toilet covers is also a little troublesome, thenToilet seat installationWhat are the methods? What are the precautions for toilet seat installation? Let's introduce it to you.

1. Toilet lid installation method.

1. Mark the position and drill the hole; Align the bottom of the toilet with the drain, draw the size and outline of the outer ring with a marker, mark the fixed hole at the bottom of the toilet bowl and drill the hole, and use the general eyelet depth of 5cm.

2. Embedded parts, sealed treatment; Hammer the steel expansion bolt into the ground drill, put the expansion bolt into the bottom corner of the toilet bowl and tighten the nut to put the toilet in place. The toilet drain outlet should be tightly connected with the preset sewage pipe on the ground and sealed.

3. Align the toilet drain pipe you marked with the sewer drain pipe, install a sealing ring at the bottom of the toilet with the toilet seat, or glass glue, to ensure that the toilet pipe can coincide with the nozzle of the sewer and be stable.

4. Screw the screws in the installation place of the toilet, install and debug the accessories of the water tank, and connect the water pipes in the bathroom. Before that, be sure to check whether the water valve switch in your home is normal, check whether the toilet hose connected to the water valve is normal, whether the length is long enough, etc., and so on, when installing the water pipe, you must be close and cautious, no leakage, to prevent leakage when pumping.

2. Precautions for toilet lid installation.

1.The toilet bowl should not be used in an environment below zero degrees Celsius, otherwise the water will freeze and swell and squeeze through the ceramic. Do not hit the ceramic with hard objects to prevent breakage and water leakage.

In order to keep the surface of the toilet bowl clean, it should be cleaned with a nylon brush and a special detergent, and it is strictly forbidden to use a steel brush and a strong organic solution, so as not to damage the glaze of the product and erode the pipe.

2.Check and adjust the ground level: cut the drain short, and make the drain 2mm-5mm above the ground as much as possible

After buying a toilet with the same wall spacing size and sealing cushion, you can start the installation. Before the installation of the toilet, a comprehensive inspection of the sewage pipe should be carried out to see whether there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal.

The installation of the toilet in our bathroom requires us to master certain installation skills, so what are the methods of toilet lid installation and what are the precautions for its installation, after reading the above introduction, we also understand these.

Here's how to install the toilet seat:Tools: toilet seat, screwdriver.

1. Place the toilet lid on top of the toilet, and pay attention to the screw holes of the toilet bowl must be aligned.

2. After the screw holes are aligned, insert the screws into the toilet lid and screw holes.

3. At this time, you can use a screwdriver to tighten the screws.

4. The installation is completed.

Precautions for purchase:When buying a toilet seat, the first thing to pay attention to is the size, because if the size is wrong, it will not be installed. In our purchase process, some salespeople will be big or small, it doesn't matter, they can be installed.

But in fact, the difference is still very large, because there are many types of toilets on the market, and each type has a different lid, even if it can be installed, it will affect the use.