-
It can be separated by installing a curtain in the middle of the bathroom and the small room, or a screen can be installed in the middle to partition, it should be noted that the door should be closed after going to the bathroom, so as to prevent the odor in the bathroom from entering the room.
-
Probably a wall needs to be built in the middle, and then a separate door will be installed in the bathroom, so that the small room will be separated. It should be noted that the wall must be moisture-proof, and a waterproof door must be installed.
-
Screen partitions can be used, which have good permeability; Do not use the slide in the bathroom, because there is water in the slide and the dust is difficult to clean.
-
Summary. The partition bathroom is mainly the choice of materials, from the perspective of waterproofing, I personally recommend the use of tempered glass.
The partition bathroom is mainly the choice of materials, from the perspective of waterproofing, I personally recommend the use of tempered glass.
Another problem to consider is the water, this point is more difficult to do, if it is the overall decoration is fine.
Generally speaking, tempered glass as a material for toilet partitions is a kind of widely used Xianghand, because of its transparent glass characteristics are very easy to clean, the durability is very high, and the general service life is relatively long. The bathroom will generally be more humid, and the waterproof characteristics of tempered glass are very well displayed, in addition, in terms of appearance, tempered glass Zheng Yan Xili will give people a warm feeling, in the home bathroom of this material of finished partitions are very popular.
Ask about custom messages].
-
<> small bathroom should not be partitioned. Because the small bathroom itself is small in size and the space is narrow, if you make a partition, the air in the toilet will be less smooth and more crowded. For small bathrooms where partitions are not possible, shower curtain partitions can be used.
The shower curtain is just a piece of waterproof cloth, hung with the help of the shower curtain rod, it can be opened when used, and can be put away when not in use, which will not waste valuable bathroom space, and has a certain waterproof and windproof effect, which can prevent the water splash of the shower from splashing outside the shower, and also plays a certain role in heat preservation.
-
Due to the relatively small area of the bathroom, it is necessary to pay more attention to the space problem when decorating. Does Xiaowei have to make a partition between his brothers and students? Let's take a look.
It is recommended that it is better not to make a partition in a small bathroom, because the space is small, and if you make a partition, the air in the toilet will be less smooth, and the area will be more narrow.
The bathroom is the most humid space in the home, so when designing the pattern, the separation of dry and wet in the bathroom is a very important link, but for most of the smaller bathrooms, the partition is cramped. For this reason, it is recommended that it is better not to make partitions in smaller bathrooms.
-
In our daily life, many people will choose partitions when decorating their homes, and the existence of partitions makes every corner of the home clear in the division of labor, so that every corner can give full play to his functions. However, many people have a layout in their homes where the bathroom and living room are next to each other, which requires a partition. Next, I will give you a detailed introduction to the partition between the bathroom and the living room, I hope you can have an in-depth understanding of the partition between the bathroom and the living room after reading the introduction.
First, the choice of partition between the bathroom and the living room
In the sanitary partition, we can consider man-made panels, which are of relatively good quality, moisture-proof and easy to clean. However, the cost will be relatively high.
If we want to choose partitions with a stronger structure and a good texture, then we can choose natural stone. This kind of partition is relatively strong and has a very good texture, but it is easy to stain and difficult to cut.
Composite board is also a material that can be selected in the sanitary partition, the composite board is lightweight, easy to degum or corrode after moisture, and it is also easy to deform. The cost of this type of material will be relatively low, and it can be chosen by some economical owners.
The simplest partition in the bathroom is the plastic partition, the waterproof performance of this kind of material is not bad, but there are too many drawbacks, such as not resistant to high temperature, very easy to deform, not beautiful enough, Liang You texture is not good, but the cost is very low. It is estimated that there will be very few people who choose such materials.
The bathroom is relatively difficult to do in the home improvement project, how to deal with the bathroom, the owners have to worry more. But the estimate of the sanitary partition is very small. Therefore, when purchasing, the owners choose the appropriate sanitary partition according to their own situation.
2. Precautions for installation of sanitary partitions
1. Lay floor tiles and wall tiles first, and then customize the sanitary partition according to the actual size (note that there may be errors up and down the wall, and the glass door can be customized according to the actual size to install and use.)
2. Before laying floor tiles, install sewer pipes and install floor drains (otherwise where will the shower water flow.)
3. There is a door frame to block water, if there is no door frame, it is necessary to install a hail sill stone (centimeters above the ground), otherwise the shower water will not be able to achieve the purpose of dry and wet partition when it flows out from under the door.
4. With floor drains, water flows into the sewer, where does water come from? The sill stone can be 8-12 cm wide, and the foot will not clump when stepping on it.
5. Don't use the slide, because the water and dust in the slide are difficult to clean, and it will stink after a long time.
That's it for the partition between the bathroom and the living room, and that's it. I believe that after reading the summary about the partition between the bathroom and the living room, you must have a thorough understanding of the partition between the bathroom and the living room. Here, I want to say that when you buy a bathroom and living room partition, you must pay attention to the airtightness of the bathroom and living room partition.
After all, the bathroom is a very private place. Hopefully, the partition between the bathroom and the living room can be of some help to you.
You can get it for free
-
Bedroom & Bathroom Partition Case – A Modern Classic.
There are many kinds of materials for partition design between bedroom and bathroom, and glass material is one of them, many people will make an arc-shaped design using glass for partition, which looks unique, and the use of glass for partition can also increase the transparency of the space, and also increase the brightness, and the overall effect is still very good.
Bedroom and bathroom partition case - British style.
The first impression of the British-style partition is low-key luxury, and it will look very elegant in terms of color matching, giving people the feeling of high-quality design. The partition material used here is also a glass door, which is also very good, which can separate the bedroom from the bathroom, but does not give people the feeling of splitting the space, and the design of the curtains is also intimate.
The case of bedroom and bathroom partition – minimalism.
Bedroom & Bathroom Partition Case – Freedom House.
The design of the open master bedroom bathroom can also be partitioned with glass material, different forms can be used when designing, and the partition is very good, like the effect in the figure, the design of the glass shower room improves the transparency of the space and the spacious visual experience, and also makes the ventilation effect of the bathroom better, and the overall environment can be more comfortable.
For example, if the sanitary partition is used in an indoor living place, it needs to be environmentally friendly and easy to clean;
If sanitary partitions are used in entertainment venues, they need to be fireproof, moisture-proof and corrosion-resistant; If it is used in places where schools and restaurants are densely populated, they need to be fireproof, moisture-proof, stable and so on. Therefore, the requirements for sanitary partition materials are different for different use positions.
However, the choice of materials for the wall, top and floor of the bathroom is also different.
What do I need to pay attention to when decorating the bathroom in summer? What safety details need to be considered for bathroom renovation? Toilet decoration needs to pay attention to moisture-proof, non-slip and waterproof ground. >>>More
There are many problems that need to be paid attention to, but as long as the problems mentioned below are avoided, it is a good way to turn the bathroom into a cloakroom. Now there are more and more friends who want to have a cloakroom at home, and there happens to be a spare bathroom at home, so they want to change one of the bathrooms into a cloakroom, which is okay, and it is also the practice of many friends. >>>More
When the bathroom is decorated, you can do a good job of dry and wet separation, you can choose two separation method, three separation method or four separation method, which can be selected according to the space of the bathroom. When you are designing, you can think about how to maximize the utilization of the entire space. <> >>>More
The bathroom is dry and wet separation, which is a problem encountered in most decorations. The advantage of wet and dry separation is that it is both hygienic and tidy and has a private space, making full use of the space in the bathroom. I think the partition is made of glass. >>>More
Pottery or foam bricks made of pearl cotton are expensive, so most renovation companies use brick slag from the construction site to backfill the walls. When using brick slag backfill, pay attention to backfilling, you should first fill out at least 15 cm with sand, and precipitate the sand with water, which can protect the waterproof layer, and then backfill with construction waste or concrete, and finally fill the gap with sand, but be sure to pay attention to filling, it is best to wait for a period of time, and then lay bricks after even settlement. The sunken toilet refers to the fact that after the main body is built, the structural layer of the toilet is partially or integrally sunk to a certain height from the corresponding floor slab, so that the horizontal drainage pipe of the toilet is buried in it, and then backfilled with lightweight materials, and only one hole is set up on the structural surface for the drainage riser by use. >>>More