How to construct recycled water for home improvement? Is it appropriate to do a large circulation or

Home decoration circulating water hot water pipe, to ensure that the hot water pipe is connected in series, after coming out of the water heater, you can finally return to the water heater, that is, the water heater wash basin, tomb robbery encounters water heater. In addition, there will be three small holes in the water device, one is cold water, one is hot water and one is backwater. If there are two bathrooms, the hot water and electricity need to be connected to the return pipe.

In addition, when installing, it must be separated from hot and cold, and these principles of hot and cold must be followed.

<> saving water, water can be recycled and water bills can be saved.

Water is the source of life, and people's daily home life is inseparable from domestic hygiene hot water. As people's houses become larger and larger, bathrooms have changed from one shared by the whole family to 2 or 3 or more, and even more for villas. At present, it is common to turn on the hot water faucet, and the hot water will not come for a long time, and even waste a bucket of clean water before the hot water comes.

In today's advocacy of water-saving, energy-saving, and comfortable homes, it is very inappropriate.

For example, if the water heater is installed on the balcony and is far away from the shower room, or if there are more than two shower rooms, when using hot water, the frozen water of the cold water pipe must be put out before the hot water can be produced, which will waste a lot of water and electricity in vain.

Especially in winter, children or the elderly wait for a long time, which is easy to catch a cold and cause unnecessary damage to the body; This situation will not occur when the circulating water is installed, and the hot water will be opened immediately, and the life is comfortable and convenient.

If you don't use circulating water, the water in the water pipe is stagnant water (still water), still water is unhealthy for **, if you use circulating water, it is a living water cycle, which is beneficial to **;

If you don't use circulating water to open the water DC, the gas calorific value will be relatively large, waste of gas, if there is circulating water, it will only be the water in the circulating water pipe, the water flow rate will be small, the combustion calorific value will be low, save gas, and open the hot water directly.

Is it an indoor hot water cycle?

Home improvement waterway circulation.

In fact, the small circulation is to reheat the water in the hot water pipe to achieve the purpose of constant temperature of hot water, so that the hot water will be available immediately, avoiding waste of water resources, and it is more convenient to use. Reserve the return pipe in the early stage of hydropower transformation.

The hot water pipe goes directly to the farthest end and does not pass through the branch waterway. Finally, make the return pipe back to the bottom of the circulating pump.

<> in the flat floor, no matter how many bathrooms and several hot water points, in order to achieve the unity of the time of hot water at each water point, we can use the hot water pipes of each water point to string together (it used to be parallel), in this way we call the small circulation is to use the cold water pipe to make the return pipe, which is inaccurate, although the use of cold water pipe to make the return pipe is a small circulation is good, but it is not recommended to do this, because once the cold water pipe is used as the return pipe, as long as the water heater at home is in standby state, the large circulation is not closed, Although it can produce hot water in seconds, it also means that the pipes are longer and there are more consumables, so the money spent on decoration must also be more. Small circulation, although it will delay the hot water for a period of time, but it can save costs when decorating.

Small circulation pipe routing method Small circulation is to connect a return pipe from the farthest end of the water point to the water return device, that is, the hot water main circuit circulation. In small and medium-sized apartments, due to the close distance between each water point and the return pipe, this method can be a large circulation is to let the water enter the fan heater and then return to the studio for cooling, and the thermostat during the small cycle work.

It is closed, and there is a small tube (return pipe) under the thermostat that does not enter the circulation of the fan heater, which is called a small circulation.

This is also a typical waterway circulation, using the same three water pipes. However, compared with the large circulation A, it feels that the hot water is relatively slower (not absolutely). There are two ways to use ordinary water heaters to increase the circulating pump to circulate hot water circuits, one is that the waterway changed during the decoration of the new house is a small circulation, that is, there is a small circulation of the return pipe, and the other is that the old house is renovated without a return pipe, by installing a three-way and a one-way valve between the farthest hot and cold water outlets.

The way to achieve zero cold water is a small cycle, which is convenient to deal with when there is a fault in the future, but the installation is more complicated.

The transformation of the hot water circulation system in the family needs to be planned and communicated in detail in the early stage, because whether it is a small cycle or a large cycle, it is not a fixed way, it is necessary to change flexibly according to the site, and finally we do the hot water circulation system at home, and we also need to keep all the hot water pipes insulated, which is also an indispensable part of the transformation.

Small loops. Because the water consumption in our family is not particularly large, there is no need to use a large cycle, and using a large cycle is a waste of resources.

The large circulation and small circulation of the home improvement waterway are actually the secondary heating of the water in the hot water pipe to achieve the purpose of hot water constant temperature, so that the hot water will be available immediately, avoiding the waste of water resources, and it is more convenient to use. In the early stage of hydropower transformation, the return pipe is reserved, and the hot water pipe reaches the farthest end directly, without passing through the branch waterway. Finally, make the return pipe back to the bottom of the circulating pump.

In the flat floor, no matter how many bathrooms and several hot water points, in order to achieve the unity of the time of hot water at each water point, we can use the hot water pipes of each water point to string together (it used to be parallel), in this way we call the small circulation is to use the cold water pipe to make the return pipe, which is inaccurate, although the use of cold water pipe to make the return pipe is a small circulation is good, but it is not recommended to do so.

Small loops should be done; Because the cost of the small cycle will be lower, and the effect of the large cycle and the small cycle is not much different.

If your home is very large, you can do a large cycle, if the square meter of your home is small, at 100 square meters, you can do a small cycle.

Summary. Hello, from the perspective of low-carbon environmental protection, it is necessary to install household circulating water, because after installing circulating water equipment at home, it will reduce the water flow, reduce the calorific value of combustion, play a role in saving energy, and open it can directly produce hot water, so that users can feel a comfortable bathing environment.

Hello, from the perspective of low-carbon environmental protection, it is necessary to install household circulating water, because after installing circulating water equipment at home, it will reduce the water flow, reduce the calorific value of combustion, play a role in saving energy, and open it can directly produce hot water, so that users can feel a comfortable bathing environment.

Hello, from the perspective of low-carbon environmental protection, it is necessary to install household circulating water, because after installing circulating water equipment at home, it will reduce the water flow, reduce the calorific value of combustion, play a role in saving energy, and open it can directly produce hot water, so that users can feel a comfortable bathing environment.