Why does the toilet in the toilet always retain a part of the water?

The part of the water that is retained can effectively organize the volatilization of odors in the pipes. It also plays a certain role in protecting the indoor air. Therefore, the toilet bowl in the toilet will always retain a part of the water.

The toilet has a part of the water to prevent the smell of the sewer from coming out, and this water is also called a water seal. Blocking the smell of the sewer, if not, is quite scary.

Because it is necessary to block the smell of the sewer and avoid this smell from running into the room through the toilet, it will cause some bad effects on people's health

Summary. The reason why there is always water in the toilet toilet is a deodorization principle. Whether it is a toilet or a squatting toilet, even some floor drains or water outlets of vegetable basins are made in a curved U-shape.

Because it is easy to produce organic gases and even unpleasant smells when decomposed in the pipeline, making it into a U-shaped is equivalent to playing a role in isolating and disconnecting the deodorization principle, leaving a section of water in the U-shaped tank to isolate the unpleasant smell and emit it, which is why a bendable iron rope is used when dredging the pipeline.

Have a great day

Why is there always water in the toilet toilet?

Hello, we have collected relevant information for you, please check for reference! The reason why there is always water in the toilet toilet is a principle of muffled blind odor prevention. Whether it is a toilet or a squatting toilet, even some floor drains or water outlets of vegetable basins are made in a curved U-shape.

Because it is easy to produce organic gases and even unpleasant smell when decomposing in the pipeline, making it into a U-shaped is equivalent to playing an isolated and disconnected deodorization principle, leaving a section of water in the U-shaped groove to isolate the unpleasant smell from the ante air, which is why the base width is why the bendable iron rope is used when dredging the pipeline, I wish you a happy life

The water that remains is the water of my own house, or the dirty water from the sewers downstairs or upstairs.

Water in your own home.

The upstairs and downstairs people's bathrooms are exactly the same as the location of my house, and the flushing of his bathroom won't pass through my house.

His flush will go through your pipes, but the water in your toilet is your own clean water, and the outlet and the inlet are different.

Why does the toilet in the toilet always retain a part of the water?

Dear, hello, I am happy to answer for you: the toilet in the toilet, always retains a part of the water for the following reasons: the left water is empty is sealed, it relies on its own weight and the unique air tightness of the water, cut off the sewage pipe and the indoor air through, effective wax filial piety to prevent the smell in the pipe from stringing into the room, because this round of missing water is the clean water left after the feces are flushed, will not deteriorate in a short time, and there will be a new water replacement for the next use.

So the indoor air quality is protected.

Summary. 1. If it is leaking from the bottom of the toilet after flushing the toilet, and the water is not clear and has a peculiar smell, then it can be basically judged that the sealing ring on the drain pipe at the bottom of the toilet is not sealed, and the sealant between the edge of the toilet and the ground is not tightly sealed. This phenomenon mostly occurs shortly after the toilet is installed.

2. If there is water seepage from the surface of the toilet at any time, then it is suspected that there may be cracks in the toilet, the test method is: first turn off the inlet valve, drain the water in the toilet tank, and then use red ink or colored ink to add to the water remaining in the tank, stay for about 30 minutes, and observe whether there is colored ink oozing out of the place, if there is, it can be concluded that the toilet has cracks, this situation can not be repaired, even if it is repaired, it is also a problem toilet, the only way is to replace it.

3. If the toilet tank can't store water, there are two situations that can occur, one is the problem of water parts, you can repair it to see if the leather cushion is loose, if there is no way, you can only change the water parts; Another situation may be that there is a crack in the inside of the toilet, and if the water is fine, it can be detected from the second method.

Why is the water still white after cleaning the toilet bowl.

Hello, I have seen your question and am sorting out the answer, please wait a while

Why is the water still white after cleaning the toilet bowl.

1. If it is leaking from the bottom of the toilet after flushing the toilet, and the water is not clear and has a peculiar smell, then it can be basically judged that the sealing ring on the drain pipe at the bottom of the toilet is not sealed, and the sealant between the edge of the toilet and the ground is not tightly sealed. This phenomenon mostly occurs shortly after the toilet is installed. 2. If there is water seepage from the surface of the toilet at any time, it is suspected that there may be cracks in the toilet

First turn off the water inlet valve, drain the water in the toilet tank, and then add red ink or colored ink to the water remaining in the tank, stay for about 30 minutes, and observe whether there is colored ink oozing out of the place. 3. If the toilet tank can't hold water, there are two situations that can occur, one is the problem of water parts, you can repair it to see if the leather cushion is loose, if there is no way, you can only change the water parts; Another situation may be that there is a crack in the inside of the toilet, and if the water is fine, it can be detected from the second method.

Summary. Hello, dear is very happy to have your question, for you to inquire: the toilet flush will leave some water, but not too much, more, maybe the toilet is blocked, you can try to pump the water again, if the water is faster, then normal, if the water is very slow, it must be blocked, to pass the toilet.

Why is there still a lot of water in the toilet after the water is flushed? Exceeding the normal water storage.

Hello, dear is very happy to have your question, for you to inquire: the horse mill cavity barrel will leave some water after flushing, but not too much, more, maybe the toilet is blocked, you can try to re-pump the water, such as the eggplant fruit is faster than the blind shirt, then normal, if the water is very slow, it must be blocked, to pass the toilet.

Basically, in your case, the toilet is blocked, kissing, will cause such an impact, or it may be because the toilet collapse is not reasonable in the design of the anti-water bend, there are defects when the kiln is released, or the sewer transformation is unreasonable. In addition, the water level of the water tank can be lowered by adjusting the inlet valve, or the switch of the full row adjustment of the discharge valve can be adjusted, and the closing time of the drain valve can be delayed or postponed.

Precautions for toilet use: Before buying, you must find out the exact size of the center of the drain from the wall, generally divided into mm pit spacing, you can ask the foreman what is the pit spacing of our house and listen to the foreman's opinion on how big the pit spacing to buy. Check whether the water parts in the water tank are genuine products, whether they have the function of liters of water-saving front tank, whether the inner side of the water tank and sewer nozzle is glazed, and whether the sound is crisp when you knock on any part of the toilet.

When installing the toilet, please do not use cement and other materials to fill the gap at the foot of the toilet to prevent cement and other materials from squeezing or damaging the toilet due to expansion.

Why is there still a lot of water in the toilet after the water is flushed? Exceeding the normal water storage.

Generally speaking, there is a pipe in the toilet, when you flush the water, the outlet will block the flow of water first, and then the water will flow out of the drain at the bottom of the toilet, but due to the insufficient water pressure in the toilet pipe, the water flow will be obstructed, so the water in the drain will be slowly discharged, and eventually the water in the toilet will exceed the normal water storage of the shed.

It is a very common problem for water to come out of the toilet bowl all the time, usually caused by a damaged filling valve or gasket inside the toilet bowl or a lack of sealing. Although this problem may seem simple, if not dealt with in time, it will not only result in wasted water, but also increase water bills, and even lead to flooding and other sanitation problems. Here are some workarounds:

1.Check the water tank.

Inside the toilet tank is a small ball called a "float", which senses the height of the water and controls the speed at which the water enters or exits. If the float gets stuck or damaged, it will cause the potato to flow out of the toilet bowl all the time. In this case, the position of the float can be adjusted appropriately or replaced.

2.Check the filling valve.

The toilet filler valve is a key component that controls the flow of water into the tank, and if it is not sealed tightly or is worn, it will cause water to flow out of the toilet bowl all the time. The sealing gasket of the filling valve can be checked to see if it is in good condition, it can be replaced if it is worn, and it can be tightened and adjusted if it is loose.

3.Check the water pipes.

There is a water pipe connected to the toilet bowl and the water source, and if this water pipe is damaged and leaks, the water will continue to flow into the toilet, and at a certain point, the water will continue to flow out of the toilet. Pipes can be inspected for loose or worn and cracked water, and replaced if necessary.

4.Repair leak holes.

Some toilets have leaking holes, and if the hole is clogged or damaged, it will cause the toilet to be unable to remove excess water, so that the water will continue to flow into the toilet. If it needs to be repaired in time, you can use a repair agent or replace the toilet.

In short, it is necessary to find the cause and deal with the problem of water flowing out of the toilet all the time. Proper adjustments or repairs can bring the toilet back into normal use while still saving money on water bills, so don't overlook Hand in Hand.

If the toilet bowl is only half empty, it may be caused by a blockage, a lack of water in the tank, or a leaking pipe. In the face of this problem, here are some solutions to this problem:

1.Clear the blockage: If the water flow is blocked, it may be because the blockage is blocking the flow of water. You can use a toilet brush or a rubber toilet tool to clean up the blockage and let the water flow smoothly.

2.Check the water level of the water tank: An insufficient water level in the tank may result in a decrease in the amount of water produced. The lid of the water tank can be opened to check if the water level is below the stated water level. If yes, the water level can be turned up by adjusting the water level regulator inside the tank.

3.Check for leaks in the pipeline: A leak in the line can also cause a decrease in water flow. You can check whether there is a leak in the pipes under the toilet or on the wall, and if so, it needs to be repaired in time.

4.Slow down with a chemical cleaner: If the water flow is reduced due to fouling inside the toilet, you can use a chemical cleaner to clean the toilet. You can choose a liquid toilet bowl cleaner or toilet bowl descaler that is commonly available on the market and use it according to the instructions.

5.Ask a professional to repair it: If the above methods still do not solve the problem, it is recommended to ask a professional to repair it. Replacement parts or more complex repairs may be required.

In short, it is a relatively common problem that only half of the toilet water is left, but it needs to be solved differently depending on the specific situation. It is recommended to carefully check and analyze the problem before maintenance to avoid unnecessary waste and loss.